MAX9004EUB+T Analog Devices Integrated Circuit (Small Outline Packages) In Stock
Analog Devices MAX9004EUB+T is a low-power, high-speed single-supply op-amp comparator reference IC in a 10-pin MINI-SO package. Operates from a single supply with propagation delays under 10 ns and rail-to-rail inputs. Available in tape-and-reel packaging with worldwide shipping.
- Manufacturer
- Analog Devices
- Package
- Small Outline Packages
- Pin Count
- 10
- Lifecycle
- ACTIVE
- Datasheet
- MAX9004EUB+T Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $4.5000(MOQ 1000)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- High-speed comparator with propagation delay under 10 ns for fast signal detection applications
- Low-power single-supply operation enabling battery-powered and portable design configurations
- 10-pin MINI-SO package occupying minimal PCB area for space-constrained designs
- Rail-to-rail input range for accurate signal comparison across the full supply voltage span
- Integrated reference IC combining op-amp and comparator functions in a single device
Applications
The MAX9004EUB+T is designed for battery-powered instrumentation and portable consumer electronics where low quiescent current and fast response are critical. It excels in window comparator circuits, zero-crossing detectors, and signal-conditioning front-ends for ADC interfaces operating from a single 2.7 V to 5.5 V supply. Its compact 10-pin MINI-SO footprint makes it suitable for wearable sensors and space-constrained industrial measurement modules.
Specifications
| Manufacturer Package Code | 10-MINI_SO-N/A |
| Reach Compliance Code | Compliant |
| Date Of Intro | 1998-01-03 |
| YTEOL | 9 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| JESD-30 Code | S-PDSO-G10 |
| JESD-609 Code | e3 |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Shape | SQUARE |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What supply voltage range and propagation delay does the MAX9004EUB+T support?
The MAX9004EUB+T operates from a single supply in the range of 2.7 V to 5.5 V, covering both 3.3 V and 5 V logic systems. Its comparator propagation delay is typically under 10 ns, enabling high-speed signal detection at frequencies up to several tens of MHz in time-critical control loops.
Which compact PCB designs benefit most from the MAX9004EUB+T 10-pin MINI-SO package?
The 10-pin MINI-SO package measures approximately 3 mm x 3 mm, making it an excellent fit for wearable sensors, handheld test equipment, and IoT edge nodes where PCB real estate is limited to under 10 cm². Its small footprint and single-supply operation from 2.7 V to 5.5 V reduce BOM complexity in battery-operated products.
How does the MAX9004EUB+T compare to a standard LM393 dual comparator in low-power applications?
The MAX9004EUB+T achieves a propagation delay under 10 ns, significantly faster than the LM393's typical 1.3 µs, while consuming low quiescent current suitable for single-cell battery systems running at 2.7 V. The MINI-SO 10-pin package also occupies less than half the board area of a standard SOIC-8 LM393, making it preferable for miniaturized designs.
Is the MAX9004EUB+T suitable for use in 3.3 V microcontroller-based ADC front-end circuits?
Yes, the MAX9004EUB+T is well-suited for 3.3 V ADC front-end applications because it operates from a single 2.7 V to 5.5 V supply and features rail-to-rail inputs spanning the full supply range. The under-10 ns propagation delay ensures the comparator output settles well within the acquisition time window of most 12-bit to 16-bit SAR ADCs clocked at 1 MHz or faster.
Related Guides
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
ADAQ7768-1 Design Guide for Precision Vibration and Dynamic Signal Measurement
Design ADAQ7768-1 precision data acquisition channels for vibration and dynamic sensing with the right bandwidth, reference, clock, and layout choices.
Jun 30, 2026
AD5204BRZ10 Design Guide for SPI-Controlled Gain and Offset Calibration
Design AD5204BRZ10 digital potentiometer calibration loops with bounded trim span, safe wiper current, clean SPI routing, and reliable startup codes.
Jun 30, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1000+ | $4.5000 | $4500.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”