Analog Devices

The ADUC848BS32-5 is an 8-bit microcontroller from Analog Devices integrating ADC, DAC channels, and a 24-bit address bus in a 52-pin MQFP package. It operates at a maximum clock frequency of 32 kHz and supports supply voltages down to 2.85 V for low-power applications. Designed for precision measurement instruments, data loggers, and embedded control systems requiring integrated analog conversion.

IC, DIGITAL ISOLATOR

Board Mount Temperature Sensors +/- 0.5 C, 12-Bit Dig Temp Sensor I.C.

ADUC847BSZ8-3 is a Analog Devices microcontroller for embedded control and motor control. It combines 52 pins, QFP, -40°C to 125°C for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.

Digital Isolators iCoupler Digital Isolator

Video Crosspoint Switches

Voltage References SOT23-5 Voltage Reference

LQFP-208,SHARC Processor

Precision Analog Microcontroller

LFCSP-64,Precision Analog Microcontroller

IC, MIXER, 750-1160MHZ

DEMOD, QUAD, 750-1150M

LFCSP-40

IC, RF MIXER, 2.5GHz to 2.9GHz

Use the download button to access the ADRF6701ACPZ-R7 schematic symbol, PCB footprint, and 3D model.

12-Bit Serial Analog-to-Digital Converters

1.2 V Ultralow Power High PSRR Voltage Reference

Charger IC Lithium Ion 20-WLCSP (2.04x2.71)

Voltage References +5V PrecisionBandgap REF

Voltage References 2.5V PrecisionBandgap REF

2 Amp Synchronous, Step-Down DC-to-DC Converter

2 Amp Synchronous, Step-Down DC-to-DC Converter

1.5 Amp Synchronous, Step-Down DC-to-DC Converter

Ultralow noise preamplifier (preamp) Voltage noise = 0.74 nV/√Hz Current noise = 2.5 pA/√Hz 3 dB bandwidth AD8331: 120 MHz AD8332, AD8334: 100 MHz Low power AD8331: 125 mW/channel AD8332, AD8334: 145 mW/channel Wide gain range with programmable postamp −4.5 dB to +43.5 dB in LO gain mode 7.5 dB to 55.5 dB in HI gain mode Low output-referred noise: 48 nV/√Hz typical Active input impedance matching Optimized for 10-bit/12-bit ADCs Selectable output clamping level Single 5 V supply operation A

8-Bit, Complete, 32 MSPS A/D Converter

IC, DC-DC CONV, 1.725MHz

Power Factor Correction - PFC Digital Power Factor & Input Power Meter

5 V, 12-Bit nanoDAC®, Serial Interface in MSOP and LFCSP Packages

700 MHz to 1000 MHz, 1 W RF Driver Amplifier

IC, CAN TX/RX, ISOLATED, 5V

0.1 µF, +5V CMOS RS-232 200kBPS Transceiver with 4 Drivers, 5 Receivers

1.8 V Analog-to-Digital Converter

High-Speed, 2-Channel RS232/V.28 Interface Devices

Open-Drain Microprocessor Supervisory Circuit

CMOS Low Voltage 2.5 V Dual SPDT Switch

Complies with 89/336/EEC EMC directive ESD protection to IEC 1000-4-2 (801-2) Contact discharge: ±8 kV Air-gap discharge: ±15 kV Human body model: ±15 kV EFT/burst immunity (IEC 1000-4-4) Low EMI emissions (EN 55022) Eliminates need for TransZorb® suppressors 230 kbps data rate guaranteed Single 5 V power supply Shutdown mode 1 μW Plug-in upgrade for MAX2xxE Space saving TSSOP package available

RF Amplifier DC to 6GHz 15dB Gain

Supervisor Programmable 7 Channel 28-TSSOP

RF Amplifier 6 GHz Ultrahigh Dyn Rg Diff Amp

400 MHz to 6 GHz Broadband Quadrature Modulator

LFCSP-32

1 MHz to 10 GHz, 62 dB Dual Log Detector/Controller

400 to 6000 MHz Quadrature Demodulator

RF Amplifier IC 700MHz 24-LFCSP (4x4)

100 MHz to 4000 MHz RF/IF Digitally Controlled VGA

ADL5243ACPZ-R7 is a Analog Devices integrated circuit for electronic designs. Key specs include 32 pins, QFN, and datasheet-backed parameters. From inquiry quote with in stock worldwide shipping support.

Cascadable IF VGAs with Programmable RMS Detectors

Logarithmic Amplifiers Logarithmic Converter

CMOS 4-Channel Analog Multiplexer

IC CHANNEL PROTECTOR SGL SOT23-6