Analog Devices

5 kV RMS Quad-Channel Digital Isolators

22-Bit Data Acquisition System

Switching Voltage Regulators 4 to 20mA loop buck regulator

Analog Devices AD7710SQ is a 2-channel 24-bit delta-sigma ADC with serial interface in a 24-pin ceramic DIP package. It samples at up to 1.028 ksps with an analog input range of ±2.5 V and linearity error of only 0.003%, making it ideal for precision measurement and industrial instrumentation. Available worldwide for high-accuracy signal acquisition designs.

Microprocessor-Compatible 12-Bit D/A Converter

The AD767KP is a 12-bit digital-to-analog converter from Analog Devices with 500 kSPS throughput rate, parallel word input supporting binary and offset binary coding, and ±10 V analog output range in a 28-pin LCC package for precision signal generation.

PulSAR Unipolar CMOS ADC

Unipolar ADC with Reference

16-Bit Differential ADC

Zero-Drift, Single-Supply, Rail-to-Rail Input/Output Operational Amplifier

18-Bit, 2 MSPS SAR ADC

IC, ADC, 12BIT

The Analog Devices AD75004KP is a quad 12-bit digital-to-analog converter (DAC) in a PLCC-28 package with parallel 8-bit input format and an analog output voltage range of -5 V to +5 V. It offers four independent DAC channels with buffered voltage outputs, suitable for precise multi-channel analog signal generation. Targeted at industrial process control, automated test equipment, and programmable power supplies requiring high-resolution simultaneous analog outputs.

Four 12-Bit DACs in One Package 4-Quadrant Multiplication Separate References Single Supply Operation Guaranteed Specifications with +3.3 V/+5 V Supply Low Power Versatile Serial Interface Simultaneous Update Capability Reset Function 28-Pin SOIC, SSOP and DIP Packages

IC, DAC, 12BIT, 125KSPS, DIP-28

IC, ADC, 12BIT, 1MSPS

CERAMIC, DIP-8

► Low input bias current ► ±20 fA maximum at TA = 25°C (guaranteed at production test) ► ±20 fA maximum at −40°C < TA < +85°C ► ±250 fA maximum at −40°C < TA < +125°C (guaranteed at production test) ► Low offset voltage: 50 µV maximum over specified CMRR range ► Offset voltage drift: ±0.13 µV/°C typical, ±0.5 µV/°C maximum ► Integrated guard buffer with 100 µV maximum offset ► Low voltage noise density: 14 nV/√Hz at 10 kHz ► Wide bandwidth: 2 MHz unity-gain crossover ► Supply voltage: 4.5 V to 16

Digital Potentiometer ICs +/-15V DIGITAL POTENTIOMETERS 10K OHM

SAR ADC with PGA and Four Comparators

IC LVDT SGNL COND UNVRSL 24CDIP

Data Acquisition ADCs/DACs - Specialized Ultralow Power, 1.8 V, 3 mm 3 mm, 2-Channel Capacitance Converter

IC, ADC, 12BIT, 200kSPS, PARALLEL DIP-28

Universal LVDT Signal Conditioner

Analog-to-Digital Converter

Phase Locked Loops - PLL 13.5GHz Fast Ramp DirectMod Frac-N PLL

16-Bit Parallel 100 kSPS Sampling ADC

14-Bit 128 kSPS Complete Sampling ADC

12-Bit Analog-to-Digital Converters

12-Bit Analog-to-Digital Converters

Low Cost Analog Multiplier

Analog Devices AD6655BCPZ-80 is a dual-channel IF diversity receiver IC integrating two 14-bit ADCs sampling at up to 80 MSPS. It targets software-defined radio and cellular base station receivers that require matched diversity paths with on-chip digital downconversion and low noise figure for demanding RF front-end designs.

IF Diversity Receiver

Variable Gain Amplifier

Analog Multiplier

Dual IF Receiver

16-Bit Monotonic Voltage Output D/A Converter

IC RMS/DC CONV PRECISION 14-CDIP

AD597AH is a monolithic Type-J thermocouple amplifier and cold-junction compensator from Analog Devices, producing a calibrated 10 mV/°C analog output voltage directly from a J-type thermocouple pair without external components. It achieves ±4°C total accuracy over a 0°C to +300°C measurement range with ±15 V dual-supply operation in a 10-pin metal can (TO-100) package. Designed for temperature measurement instrumentation, industrial process controllers, and laboratory equipment.

Differential Amplifi er

Single, 16-Bit nanoDAC® with 5 ppm/°C On-Chip Reference,Analog Converter 1 SOT-23-8

AD549LH is an Analog Devices ultralow input bias current operational amplifier with a maximum bias current of 60 fA (0.06 pA) and 90 dB minimum CMRR, designed for electrometer and charge amplifier applications. It offers JFET input technology in a hermetic 8-pin TO-99 metal can package for precision scientific and instrumentation use.

Monolithic BiMOS II Construction 60.01% Typical Nonlinearity 8- and 16-Bit Bus Compatibility 3 ms Settling to 16 Bits Low Drift Low Power Low Noise APPLICATIONS Robotics Closed-Loop Positioning High-Resolution ADCs Microprocessor-Based Process Control MIL-STD-883 Compliant Versions Available

Quad, Current-Output, Serial-Input 16-/14-Bit DACs

AD5516ABC-1 is a Analog Devices Power Supply for regulated power conversion, distributed supplies, industrial rails. Key specs include 12-Bit, 0 A, 2.5 V, -2.5 V and BGA. From $ price in stock worldwide shipping.

BGA-74,12-Bit Voltage-Output DAC

32-CHANNEL, 14-BIT DAC

Ultralow Input-Bias Current Operational Amplifier

AD9518-4ABCPZ, PLL Clock Driver, 0 → 1.6 GHz, 48-Pin LFCSP VQ

ANALOG DEVICES - ADUM6410BRSZ - DIGITAL ISOLATOR, 4-CH, 150MBPS, SSOP-24