ZF1-10-02-WT SAMTEC Connector (Other) In Stock
SAMTEC ZF1-10-02-WT is a 10-position zero-insertion-force flat flexible cable socket strip with 1.00 mm pitch and surface-mount termination. It accepts standard FFC/FPC cables and provides secure locking with a ZIF actuator mechanism. Available with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 10
- Lifecycle
- ACTIVE
- Datasheet
- ZF1-10-02-WT Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 10-position ZIF socket on 1.00 mm pitch enabling tool-free flat flexible cable insertion without contact damage
- Locking actuator mechanism secures FFC/FPC cables rated for up to 0.5 A per contact at 50 V AC/DC
- Surface-mount termination compatible with automated reflow soldering for high-volume PCB assembly
Applications
The ZF1-10-02-WT is used in consumer electronics, wearable devices, and portable medical instruments where flat flexible cable connections must be made and released repeatedly without special tooling. The zero-insertion-force design protects delicate FFC/FPC cables during assembly and field servicing, extending cable life across hundreds of insertion cycles. Its compact 1.00 mm pitch surface-mount footprint is ideal for thin, space-constrained PCB layouts in smartphones, laptops, and IoT sensor modules.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What cable pitch and current rating does the ZF1-10-02-WT socket strip support?
The ZF1-10-02-WT accepts flat flexible cables on a 1.00 mm pitch and is rated for up to 0.5 A per contact at a maximum of 50 V AC/DC. These ratings cover typical low-power signal and data-bus interfaces found in consumer electronics and portable medical devices.
How does the zero-insertion-force mechanism of the ZF1-10-02-WT protect cables during repeated assembly or maintenance?
The ZIF actuator opens the contact gap to zero force before the FFC/FPC cable is inserted, so no mechanical stress acts on the 1.00 mm pitch contacts or the cable conductors during placement. Closing the actuator then clamps all 10 positions simultaneously, ensuring uniform contact force across the entire cable width and preventing damage over hundreds of insertion cycles.
In which compact product categories is the ZF1-10-02-WT most commonly chosen over conventional crimped-wire connectors?
The ZF1-10-02-WT is preferred over crimped-wire connectors in thin portable devices such as smart watches, wireless earbuds, and handheld medical monitors, where the 1.00 mm pitch SMT footprint saves several millimeters of board height compared to wire-to-board connector alternatives. It is also favored in foldable and flexible-PCB assemblies where routing rigid wires would introduce mechanical stress on the substrate.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.”