TSV358ID STMicroelectronics Integrated Circuit (Small Outline Packages) In Stock
TSV358ID is a dual rail-to-rail operational amplifier from STMicroelectronics with 1.4 MHz bandwidth and 5V operation. Features low input offset voltage of 3000 µV maximum and 65 dB common-mode rejection ratio. Available in 8-pin SO package, in stock worldwide with fast shipping.
- Manufacturer
- STMicroelectronics
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- OBSOLETE
- Datasheet
- TSV358ID Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Rail-to-rail input and output swings enable full 3 V to 5 V supply voltage operation
- 1.4 MHz gain-bandwidth product suits audio and signal conditioning applications
- Low input offset voltage max 3000 µV with 65 dB minimum CMRR for precise amplification
Applications
The TSV358ID is designed for portable and battery-powered signal conditioning circuits where rail-to-rail performance on a 3 V to 5 V supply is essential. Its 1.4 MHz bandwidth makes it suitable for audio preamplifiers, sensor interface amplifiers, and active filter stages. The 8-pin SO package supports compact PCB layouts in consumer electronics and industrial sensor modules.
Specifications
| YTEOL | 0 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | 0.15 µA |
| Bias Current-Max (IIB) @25C | 0.13 µA |
| Common-mode Reject Ratio-Min | 65dB |
| Common-mode Reject Ratio-Nom | 80dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 3000 µV |
| JESD-30 Code | R-PDSO-G8 |
| JESD-609 Code | e4 |
| Low-Bias | NO |
| Low-Offset | NO |
| Micropower | YES |
| Number of Functions | 8 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOP8,.25 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE |
| Packing Method | TUBE |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Slew Rate-Min | 0.42V/us |
| Slew Rate-Nom | 0.6V/us |
| Supply Current-Max | 1.75mA |
| Supply Voltage Limit-Max | 7V |
| Supply Voltage-Nom (Vsup) | 3V |
| Surface Mount | YES |
| Technology | BICMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Terminal Form | GULL WING |
| Terminal Pitch | 1.27mm |
| Terminal Position | DUAL |
| Unity Gain BW-Nom | 1300 |
| Voltage Gain-Min | 5000 |
| Wideband | NO |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for TSV358ID:
Frequently Asked Questions
What supply voltage range does the TSV358ID support, and how does rail-to-rail operation benefit low-voltage designs?
The TSV358ID operates from a single supply of 2.7 V to 5 V, with rail-to-rail input and output swings. This means the output can swing to within millivolts of both supply rails, maximizing dynamic range in 3.3 V and 5 V battery-powered systems where headroom is limited. The dual amplifier configuration provides two independent channels in a single 8-pin SO package.
Which sensor interface applications are best matched to the TSV358ID's 1.4 MHz bandwidth and 65 dB CMRR?
The 1.4 MHz gain-bandwidth product and 65 dB minimum common-mode rejection ratio make the TSV358ID well suited for conditioning outputs from resistive bridge sensors, thermocouples, and photodiodes in industrial and consumer equipment. At unity gain the amplifier delivers stable closed-loop response up to roughly 1.4 MHz, supporting signal chains with moderate speed requirements and low-frequency noise rejection.
When would a designer choose the TSV358ID over a single-channel op-amp for a dual-channel design?
Integrating two amplifiers in one 8-pin SO package reduces component count by 50%, saving board space and simplifying procurement compared to two separate single-channel devices. With matched input offset voltages typically below 3000 µV across both channels and a shared 5 V supply rail, the TSV358ID simplifies layout in stereo audio preamplifiers, differential signal receivers, and dual-channel filter banks where channel-to-channel matching matters.
Related Guides
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
ADAQ7768-1 Design Guide for Precision Vibration and Dynamic Signal Measurement
Design ADAQ7768-1 precision data acquisition channels for vibration and dynamic sensing with the right bandwidth, reference, clock, and layout choices.
Jun 30, 2026
AD5204BRZ10 Design Guide for SPI-Controlled Gain and Offset Calibration
Design AD5204BRZ10 digital potentiometer calibration loops with bounded trim span, safe wiper current, clean SPI routing, and reliable startup codes.
Jun 30, 2026
Why Buy from FindMyChip
About STMicroelectronics
STMicroelectronics is a global semiconductor leader serving customers across the spectrum of electronics applications. ST's products are found in a wide range of applications including automotive, industrial, personal electronics, and communications.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”