TST-130-05-G-D SAMTEC Connector (Other) In Stock
SAMTEC TST-130-05-G-D is a 60-position dual-row shrouded PCB header with 0.100" (2.54 mm) pitch and gold-plated through-hole contacts. The integrated shroud provides polarized, keyed mating to prevent misconnection in high-density board-to-cable applications. Available from authorized distributors with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 60
- Lifecycle
- ACTIVE
- Datasheet
- TST-130-05-G-D Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TST-130-05-G-D?
- 60-position dual-row shrouded header at 0.100" (2.54 mm) pitch with integral keying and polarization preventing mis-mating on high-density 60-pin ribbon cable harnesses
- Gold (G) contact plating ensuring low and stable contact resistance over thousands of mating cycles in high-reliability industrial and test applications
- Dual-row (D) configuration providing 60 contacts in a footprint half the PCB length of an equivalent single-row header, maximizing board-edge interconnect density
What is TST-130-05-G-D used for?
The TST-130-05-G-D is a high-density shrouded header used in industrial automation, data acquisition systems, and test and measurement equipment requiring reliable 60-pin board-to-cable connectivity. The 0.100" pitch dual-row layout accommodates multiple signal buses, power rails, and ground references within a single keyed connector, reducing wiring harness complexity. Gold-plated contacts ensure consistent electrical performance across environments with temperature cycling from -55°C to +125°C and repeated mating operations.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TST-130-05-G-D datasheet?
TST-130-05-G-D Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TST-130-05-G-D?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the total pin count and pitch of the TST-130-05-G-D, and how does dual-row layout help in dense PCB designs?
The TST-130-05-G-D is a 60-position dual-row header at 0.100" (2.54 mm) pitch, providing 30 contacts per row. The dual-row (D) design achieves 60 connections in approximately 76 mm of PCB edge length, whereas a single-row 60-position header at the same pitch would require about 152 mm. This makes the TST-130-05-G-D ideal for data acquisition and industrial control PCBs where board edge space is limited but high pin counts are required.
Why are gold-plated contacts specified on the TST-130-05-G-D for test and measurement applications?
Gold (G) plating on the TST-130-05-G-D contacts maintains contact resistance below 20 milliohms across thousands of mating cycles and resists oxidation over the full industrial temperature range of -55°C to +125°C. In test and measurement instruments where signal accuracy depends on low and stable contact resistance, gold plating is preferred over tin because it does not form resistive oxides that could introduce measurement errors or cause intermittent connections after repeated cable insertions.
How does the shrouded housing on the TST-130-05-G-D protect against wiring errors during harness installation?
The shrouded housing on the TST-130-05-G-D encloses all 60 contact pins within a keyed plastic frame that physically prevents a 60-pin ribbon cable connector from being inserted in the wrong orientation or offset position. This polarization is critical on 60-pin harnesses where a 2-pin offset would connect power to signal lines, potentially damaging circuitry operating at 3.3 V or 5 V logic levels. The shroud reduces field wiring errors during initial installation and maintenance of industrial and automation panels.
Related Guides
TLMG1100-GS08 Indicator LED PCB Design and Validation Guide
Design and validate a TLMG1100-GS08 indicator PCB with current calculations, GPIO checks, polarity review, and enclosure tests.
Nov 7, 2026
How to Choose RK73H1ETTP1002F: Chip Resistor Selection Guide 2026
Select RK73H1ETTP1002F for 10 kΩ circuits: compare four catalog options, check power and package limits, and prepare an exact-part sourcing request.
Nov 7, 2026
ECA1JHG220: 22 µF, 63 V Electrolytic Capacitor Selection Guide
Choose ECA1JHG220 using voltage, tolerance, ripple, temperature and fit checks, with four Panasonic catalog candidates compared.
Nov 6, 2026
How to Choose an Indicator LED: TLMG1100-GS08 Selection Guide
Select TLMG1100-GS08 and evaluate four indicator LED candidates through optical, electrical, footprint, and sourcing checks.
Nov 5, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector