TST-114-05-H-D SAMTEC Connector (Other) In Stock
SAMTEC TST-114-05-H-D is a 28-position dual-row shrouded PCB header with 0.100" (2.54 mm) pitch in a horizontal through-hole configuration, providing polarized cable-to-board connections for 28-signal interfaces. Available from authorized distributors with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 28
- Lifecycle
- ACTIVE
- Datasheet
- TST-114-05-H-D Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 28-position dual-row shrouded header at 0.100" (2.54 mm) pitch with horizontal through-hole mounting for right-angle cable exit from PCB edge
- Tall -05 shroud height provides extended contact protection and positive mating guidance for error-free connector engagement across all 28 positions
- Through-hole termination enables robust solder joint retention suitable for vibration-prone applications in industrial and automotive electronics
Applications
The TST-114-05-H-D is widely used in industrial control panels, embedded computing systems, and test equipment where a 28-position shrouded right-angle header provides a reliable cable-to-board interface at 2.54 mm pitch. Its horizontal dual-row configuration allows ribbon cable assemblies to exit parallel to the PCB surface, reducing enclosure depth requirements in flat panel-mount designs. The shrouded housing with tall -05 profile also makes it popular in field-service applications where maintenance personnel connect and disconnect 28-conductor cable harnesses without risk of contact damage or mis-mating.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many total contacts does the TST-114-05-H-D provide, and what cable width does a 28-position dual-row interface require?
The TST-114-05-H-D provides 28 total contacts in a dual-row 14-position-per-row layout at 0.100" (2.54 mm) pitch. A 28-conductor dual-row IDC ribbon cable compatible with this connector spans approximately 35.6 mm (1.4 inches) in width, accommodating common 28-conductor flat ribbon cable used in legacy parallel bus, JTAG programming, and I/O expansion interfaces across embedded and industrial applications.
What advantage does the horizontal (H) mounting of TST-114-05-H-D offer over a vertical shrouded header in panel-mount enclosures?
The horizontal through-hole orientation means the cable exits parallel to the PCB surface at a 90-degree angle from the connector body, reducing total connector height above the board to approximately 10 mm to 12 mm versus 18 mm to 22 mm for a vertical configuration. This allows the TST-114-05-H-D to fit inside low-profile enclosures with internal heights below 25 mm while maintaining the full 28-contact interface, which is critical in flat DIN-rail-mounted industrial controllers and compact embedded systems.
In what scenarios would an engineer specify TST-114-05-H-D over a non-shrouded right-angle header?
Engineers specify the TST-114-05-H-D when the 28-position interface will be connected by technicians in the field or production floor without precision alignment tools. The -05 tall shroud mechanically guides the mating plug into correct position and prevents off-angle insertion that bends contact pins. For applications such as PLC I/O modules or medical device peripheral connections that undergo 50 or more field mating cycles over the product life, the shroud dramatically reduces field-return rates caused by bent-pin or mis-mated connector failures.
What mating connector families are compatible with TST-114-05-H-D for a complete ribbon cable assembly?
The TST-114-05-H-D mates with SAMTEC TSM series female dual-row 0.100" (2.54 mm) pitch receptacles and standard 28-conductor IDC ribbon cable connectors from vendors such as 3M, Amphenol, and Molex. Compatible IDC housings are rated for 28 AWG to 26 AWG conductors at 300 V and 1 A per contact, with insertion forces typically between 10 N and 30 N for a 28-position interface, depending on contact plating and mating cycles accumulated.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”