TST-113-04-L-D SAMTEC Connector (Other) In Stock
SAMTEC TST-113-04-L-D is a 26-position dual-row shrouded PCB header with 0.100" (2.54 mm) pitch and low-profile tin contact finish for board-to-board and wire-to-board interconnection. Offers full mechanical polarization and 52 total contacts for mid-density bus connections in industrial and embedded systems. Available in stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 26
- Lifecycle
- ACTIVE
- Datasheet
- TST-113-04-L-D Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TST-113-04-L-D?
- 26 contacts (13 positions dual-row) at 0.100" (2.54 mm) pitch for mid-density board-to-board or IDC ribbon cable interfaces
- Low-profile (L) contact finish option balancing cost and reliability for high-volume industrial and commercial applications
- Full polarized shroud mechanically preventing incorrect mating and protecting pins during automated ribbon cable assembly
What is TST-113-04-L-D used for?
The TST-113-04-L-D is designed for 26-signal interface connections in embedded controllers, industrial field devices, and development boards where a standard IDC ribbon cable harness is required. Its dual-row 0.100" pitch layout is compatible with 26-pin ribbon cable assemblies widely used in legacy parallel port and GPIO expansion interfaces. The shrouded polarized header protects contacts during high-cycle board swap maintenance in PLC racks, test fixtures, and modular electronic assemblies.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TST-113-04-L-D datasheet?
TST-113-04-L-D Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TST-113-04-L-D?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
Can the TST-113-04-L-D serve as a drop-in replacement for a standard 26-pin IDC shrouded header in an existing PCB design?
Yes, the TST-113-04-L-D follows the standard 26-pin dual-row 0.100" (2.54 mm) pitch shrouded header footprint, making it dimensionally compatible with most existing PCB layouts using through-hole IDC headers. The shroud polarization key aligns with standard 26-conductor ribbon cable IDC socket connectors, ensuring plug-and-play replacement without PCB redesign. Designers should verify the 0.365 inch body depth clearance and confirm through-hole pin length matches their board thickness.
What current and voltage ratings apply to the TST-113-04-L-D for mixed signal and power distribution on a 26-pin bus?
SAMTEC TST series shrouded headers are rated for up to 3 A per pin at room temperature and a maximum operating voltage of 250 V AC/DC for individual contacts. For mixed-use 26-pin buses combining 3.3 V or 5 V logic signals with low-power 12 V supply rails, the per-pin current limit constrains total power distribution to approximately 36 W across dedicated power pins, sufficient for auxiliary power supply to small daughter cards drawing under 30 W.
How many mating cycles is the TST-113-04-L-D rated for, and does the tin finish limit reuse in field-serviceable equipment?
The TST-113-04-L-D with tin (L) contact finish is rated for a minimum of 30 mating cycles, which is adequate for equipment that is serviced annually over a 20- to 30-year lifecycle. For applications requiring 250 or more cycles, such as frequently reconfigured test jigs or hot-swap modules, SAMTEC offers the same TST-113 body with gold (G) contact finish, extending cycle life to 500 or more cycles while maintaining contact resistance below 20 mΩ throughout.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector