TST-102-01-L-D SAMTEC Connector (Other) In Stock
SAMTEC TST-102-01-L-D is a 4-position dual-row shrouded PCB header connector with 0.100" (2.54 mm) pitch and low-profile right-angle (L) orientation. It features gold-over-nickel mating contacts and tin-over-nickel termination on phosphor-bronze square pins for reliable board-to-board or wire-to-board connections in space-constrained electronics designs.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 4
- Lifecycle
- ACTIVE
- Datasheet
- TST-102-01-L-D Datasheet PDF
- Category
- Connector
- Price
- From $0.6941(MOQ 1)
- Temp Range
- -55.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TST-102-01-L-D?
- 4-position dual-row shrouded design with 0.100" (2.54 mm) pitch prevents connector mis-mating and protects square pins
- Right-angle (L) orientation suits low-profile PCB assemblies where vertical clearance is limited to a few millimeters
- Gold (10 µin) over nickel mating contact finish provides reliable low-resistance connections across many mating cycles
- Square-pin contact style with tin-over-nickel termination ensures strong solder joints and consistent PCB attachment
- Compact 0.5 inch body length with 0.365 inch breadth and depth enables dense connector placement in small form-factor boards
What is TST-102-01-L-D used for?
The SAMTEC TST-102-01-L-D is used in industrial sensors, embedded controller boards, and consumer electronics where a 4-position right-angle shrouded header is needed in a constrained vertical footprint. The right-angle (L) mounting allows PCB-edge accessible cabling while maintaining a low-profile assembly suitable for enclosure-mounted designs. Its 2.54 mm pitch aligns with standard ribbon cables and IDC connectors, making it easy to integrate into existing harness and board designs across prototyping and production environments.
What are the specifications of TST-102-01-L-D?
| YTEOL | 9.1 |
| Body Breadth | 0.365inch |
| Body Depth | 0.365inch |
| Body Length | 0.5inch |
| Connector Type | BOARD CONNECTOR |
| Contact Finish Mating | GOLD (10) OVER NICKEL |
| Contact Finish Termination | Tin (Sn) - with Nickel (Ni) barrier |
| Contact Gender | MALE |
| Contact Pattern | RECTANGULAR |
| Contact Style | SQ PIN-SKT |
| DIN Conformance | NO |
| Filter Feature | NO |
| IEC Conformance | NO |
| Insulation Resistance | 5000000000Ω |
| Insulator Color | BLACK |
| Insulator Material | GLASS FILLED POLYESTER |
| JESD-609 Code | e3 |
| MIL Conformance | NO |
| Mating Contact Pitch | 0.1inch |
| Mating Contact Row Spacing | 0.1inch |
| Mating Information | MULTIPLE MATING PARTS AVAILABLE |
| Mixed Contacts | NO |
| Mounting Option 1 | LOCKING |
| Mounting Style | STRAIGHT |
| Mounting Type | BOARD |
| Number Of Connectors | ONE |
| Number Of PCB Rows | 2 |
| Number of Rows Loaded | 2 |
| Option | GENERAL PURPOSE |
| PCB Contact Pattern | RECTANGULAR |
| PCB Contact Row Spacing | 2.54mm |
| Plating Thickness | 10u inch |
| Polarization Key | POLARIZATION NOTCH |
| Terminal Length | 0.115inch |
| Terminal Pitch | 2.54mm |
| Termination Type | SOLDER |
| Total Number of Contacts | 4 |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8536.69.40.40 |
| Country of Origin | Mainland China, USA |
Where can I find the TST-102-01-L-D datasheet?
TST-102-01-L-D Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TST-102-01-L-D?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How does the right-angle orientation of the TST-102-01-L-D affect PCB layout and connector accessibility?
The right-angle (L suffix) orientation of the TST-102-01-L-D positions the mating direction parallel to the PCB surface, reducing the vertical height requirement compared to vertical headers and making the connector accessible from the board edge. This is useful in low-profile enclosures where a vertical 0.100" header would protrude too far, and it allows the 4-position connector body (0.5 inch long, 0.365 inch deep) to fit within standard chassis cutouts without modifying the enclosure.
What contact finish is used on the TST-102-01-L-D and how does it compare to higher gold thickness variants?
The TST-102-01-L-D uses 10 µin gold over nickel on the mating contacts, which suits applications with moderate mating cycle counts in clean environments. Variants with 30 µin gold over nickel provide longer durability for applications exceeding several hundred mating cycles or operating in more corrosive conditions. Both variants share the same 4-position, 0.100" pitch dual-row shrouded form factor, so specifying the higher gold thickness requires only a part number change with no PCB layout modification.
Which embedded or industrial applications commonly use the 4-position SAMTEC TST-102-01-L-D connector?
Industrial I/O modules, UART and SPI debug headers, and sensor-to-microcontroller wiring harnesses frequently use the TST-102-01-L-D because 4 positions cover common 2-wire, 3-wire, and 4-wire signal groups at 0.100" pitch. The shrouded body prevents accidental reversal in field-service environments, and the right-angle mounting suits panel-mount connectors in PLCs, data loggers, and embedded gateway products where the PCB sits horizontally inside an enclosure.
How does the TST-102-01-L-D body size affect PCB keep-out planning for dense board layouts?
The TST-102-01-L-D body measures 0.5 inch in length, 0.365 inch in breadth, and 0.365 inch in depth, requiring a keep-out zone of at least those dimensions plus the mating connector overhang in the right-angle direction. On a dense 2-layer PCB, placing the connector near the board edge with a 5 mm clearance to adjacent components typically satisfies both the shroud depth and the required mating clearance for standard 4-position 2.54 mm pitch mating connectors.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $2.5500 | $2.55 |
| 500+ | $1.6600 | $830.00 |
| 1000+ | $1.3100 | $1310.00 |
| 2000+ | $1.1036 | $2207.22 |
| 5000+ | $0.9030 | $4514.95 |
| 10000+ | $0.6940 | $6940.50 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector