TSH72CD STMicroelectronics Integrated Circuit (Small Outline Packages) In Stock

TSH72CD is a rail-to-rail output operational amplifier with 65MHz gain-bandwidth product, operating from 5V or 9V supply in an SO-8 package. Features 106dB typical CMRR and voltage-feedback architecture. Available from stock worldwide.

OBSOLETEIntegrated CircuitVerified May 2026
Package / Visual Reference
TSH72CDSmall Outline Packages
Quick Facts
Manufacturer
STMicroelectronics
Package
Small Outline Packages
Pin Count
8
Lifecycle
OBSOLETE
Category
Integrated Circuit
Price
From $0.8226(MOQ 2000)
Temp Range
?°C to 70.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of TSH72CD?

  • 65MHz gain-bandwidth product with rail-to-rail output swing for high-frequency signal conditioning on 5V or 9V rails
  • 106dB typical common-mode rejection ratio (CMRR min 81dB) enabling precision differential signal amplification
  • Voltage-feedback architecture with internal frequency compensation simplifying stable closed-loop filter and amplifier designs

What is TSH72CD used for?

The TSH72CD is suited for active filter design, video signal buffering, and sensor signal conditioning in industrial and consumer electronics. Its 65MHz bandwidth and rail-to-rail output enable full-swing amplification of high-frequency analog signals on single-supply systems operating at 5V. The high CMRR makes it effective in differential measurement front-ends and instrumentation amplifier stages.

What are the specifications of TSH72CD?

YTEOL0
Amplifier TypeOPERATIONAL AMPLIFIER
ArchitectureVOLTAGE-FEEDBACK
Average Bias Current-Max (IIB)20 µA
Bias Current-Max (IIB) @25C15 µA
Common-mode Reject Ratio-Min81dB
Common-mode Reject Ratio-Nom106dB
Frequency CompensationYES
Input Offset Voltage-Max12000 µV
JESD-30 CodeR-PDSO-G8
JESD-609 Codee4
Low-BiasNO
Low-OffsetNO
MicropowerNO
Neg Supply Voltage Limit-Max-7 V
Neg Supply Voltage-Nom (Vsup)-5 V
Number of Functions8
Package Body MaterialPLASTIC/EPOXY
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE
Packing MethodTUBE
Peak Reflow Temperature (Cel)260
PowerNO
Programmable PowerNO
Qualification StatusNot Qualified
Slew Rate-Min68V/us
Slew Rate-Nom118V/us
Supply Current-Max26.8mA
Supply Voltage Limit-Max7V
Supply Voltage-Nom (Vsup)5V
Surface MountYES
TechnologyCMOS
Temperature GradeCOMMERCIAL
Terminal FinishNickel/Palladium/Gold (Ni/Pd/Au)
Terminal FormGULL WING
Terminal Pitch1.27mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)30
Unity Gain BW-Nom65000
Voltage Gain-Min5623.41
WidebandNO
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.33.00.01

Where can I find the TSH72CD datasheet?

TSH72CD Datasheet Download

Official datasheet from STMicroelectronics

What are equivalent replacements for TSH72CD?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What gain-bandwidth product and supply voltage does the TSH72CD offer for high-frequency amplifier designs?

The TSH72CD provides a gain-bandwidth product of 65MHz and operates from a supply voltage of 5V or 9V. This makes it capable of amplifying signals well into the tens of megahertz range, covering applications such as IF amplification, active filter stages, and video signal buffering without requiring a dual-supply rail.

How does the TSH72CD's CMRR specification benefit differential measurement circuits?

The TSH72CD achieves a typical common-mode rejection ratio (CMRR) of 106dB, with a minimum of 81dB over operating conditions. This high CMRR strongly attenuates common-mode noise picked up by differential sensor leads, enabling accurate signal recovery in bridge sensor measurements, current-sensing, and industrial 4–20mA signal conditioning circuits.

When should a designer choose the TSH72CD over a general-purpose op-amp for an active filter?

Designers should choose the TSH72CD when an active Sallen-Key or multiple-feedback filter must operate above 1MHz with rail-to-rail output on a single 5V supply. Its 65MHz gain-bandwidth product provides adequate phase margin at filter center frequencies up to several megahertz, where lower-bandwidth op-amps would introduce excess phase shift and gain error.

What is the SO-8 package footprint of the TSH72CD and what bias current must be accounted for in the design?

The TSH72CD uses an 8-pin small-outline (SO-8) surface-mount package with 1.27mm pin pitch and a footprint of approximately 4.9mm x 3.9mm. The input bias current reaches up to 20µA maximum (15µA at 25°C), which must be balanced through matched source resistances to minimize offset errors in precision or high-impedance input amplifier configurations.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About STMicroelectronics

STMicroelectronics is a global semiconductor leader serving customers across the spectrum of electronics applications. ST's products are found in a wide range of applications including automotive, industrial, personal electronics, and communications.

AvailabilityIn Stock
Reference Price (USD)
From $0.8226
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
2000+$0.8226$1645.22
pcs
Unit price: $0.8226 · Total: $1645.22

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK