TFC-147-02-F-D-K-TR SAMTEC Connector (Other) In Stock
SAMTEC TFC-147-02-F-D-K-TR is a 94-position dual-row Tiger Eye cost-effective terminal strip at 0.050" (1.27 mm) pitch for ultra-high-density cable-to-board mating. It features a tape-and-reel packaging option and gold-plated contacts for reliable signal integrity. Available from SAMTEC distributors with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 94
- Lifecycle
- ACTIVE
- Datasheet
- TFC-147-02-F-D-K-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 94-position dual-row configuration at 0.050" (1.27 mm) pitch delivers ultra-high-density 94-channel cable connectivity
- Tape-and-reel (TR) packaging supports automated SMT pick-and-place for high-volume production runs
- Tiger Eye contact geometry provides wiping action maintaining low contact resistance across all 94 positions
Applications
The TFC-147-02-F-D-K-TR is deployed in high-channel-count data acquisition systems, multi-lane FPGA interface boards, and automated test equipment requiring 94-pin cable connections within a minimal PCB footprint at 0.050" pitch. Its tape-and-reel format makes it suitable for automated assembly lines in consumer electronics and industrial control system manufacturing. It is also used in backplane and daughtercard interconnects where routing 94 signals through a single compact connector reduces wiring harness complexity.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many positions does TFC-147-02-F-D-K-TR provide and at what pitch for high-density signal routing?
TFC-147-02-F-D-K-TR offers 94 positions in a dual-row layout at 0.050" (1.27 mm) pitch. This allows engineers to route 94 individual signals through a single compact connector, using approximately half the PCB edge length that a standard 0.100" pitch 94-pin connector would require.
What does the tape-and-reel (TR) suffix on TFC-147-02-F-D-K-TR mean for production assembly?
The TR designation indicates tape-and-reel packaging, allowing the TFC-147-02-F-D-K-TR to be loaded directly into SMT pick-and-place machines. This packaging format is essential for high-volume PCB assembly lines processing thousands of 94-pin connectors per shift without manual placement errors.
In which FPGA or multi-lane signal applications does TFC-147-02-F-D-K-TR outperform wider-pitch alternatives?
For FPGA interface boards needing more than 64 I/O signals in a single connector zone, TFC-147-02-F-D-K-TR provides 94 signals in a 0.050" pitch footprint that would otherwise require two 0.100" pitch connectors. This consolidation saves PCB area of roughly 50 mm2 and simplifies cable harness routing in test and measurement platforms.
How does the Tiger Eye contact in TFC-147-02-F-D-K-TR maintain signal integrity across 94 channels?
The Tiger Eye contact uses a bifurcated wiping design that makes two independent contact points per pin across all 94 positions, reducing the risk of open circuits from particulate contamination. This dual-contact approach maintains signal integrity at data rates up to several hundred MHz in industrial data acquisition cable assemblies.
Related Guides
How to Choose a Digital Potentiometer: AD5204, AD5206, and AD8403 Selection Guide
Compare the AD5204, AD5206, and AD8403 multi-channel SPI digipots by channel count, resistance value, and package to choose the right Analog Devices digital potentiometer for your design.
Jun 21, 2026
AD7745 / AD7746 / AD7747 Capacitance-to-Digital Converter Design Guide
Complete application note for the AD774x CDC family: circuit design, shielding, conversion rate selection, and sourcing guidance for the AD7745, AD7746, and AD7747.
Jun 21, 2026
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”