TFC-137-02-F-D-A SAMTEC Connector (Other) In Stock
SAMTEC TFC-137-02-F-D-A is a 74-position Tiger Eye cost-effective terminal strip connector with 0.050" pitch dual-row layout for high-density PCB signal routing. Features reliable Tiger Eye contacts with gold plating for secure, repeatable signal connections. Available from stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 74
- Lifecycle
- ACTIVE
- Datasheet
- TFC-137-02-F-D-A Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 74-position dual-row 0.050" (1.27 mm) pitch layout delivers very high signal density per unit PCB length
- Tiger Eye contact design provides low insertion force with secure retention across hundreds of mating cycles
- Gold-plated contacts maintain low contact resistance below 20 mΩ and resist corrosion in long-term deployments
- Cost-effective terminal strip format reduces connector BOM cost versus premium high-speed alternatives for non-critical signal interfaces
Applications
The TFC-137-02-F-D-A is engineered for high-density signal interconnection in FPGA development boards, industrial backplanes, and multi-channel data acquisition systems where routing 74 signals through a single compact connector is essential. Its 0.050" pitch dual-row layout consolidates a large I/O count into a smaller PCB area than 0.100" alternatives, enabling more compact embedded module designs. The connector is also found in test and measurement daughter-card interfaces requiring repeatable mechanical mating.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many signal positions does TFC-137-02-F-D-A provide and how compact is the connector body?
The TFC-137-02-F-D-A provides 74 positions in a 2-row layout on a 0.050" (1.27 mm) pitch. The connector body length is approximately 37 x 0.050" = 1.85" (47 mm), packing 74 signal connections into under 2 inches of PCB length. This density is critical in FPGA expansion cards and multi-channel data acquisition boards where physical board size is strictly constrained.
How does TFC-137-02-F-D-A enable cost savings compared to high-speed connectors for low-frequency signals?
For digital interfaces operating below 200 MHz — such as GPIO buses, parallel data ports, or control signal harnesses — the TFC-137-02-F-D-A provides 74-position dual-row connectivity at a fraction of the cost of high-speed differential pair connectors like SEARAY or SEARAY-HS. Engineers can allocate saved BOM budget to other critical components when signal integrity analysis confirms that 0.050" pitch stripline connections are adequate for the design's data rate and 74-signal count requirements.
In which industrial applications is TFC-137-02-F-D-A most commonly used for high-pin-count signal routing?
Industrial motion control systems with 74 or more I/O channels, programmable logic controller (PLC) expansion modules, and multi-axis servo drive backplanes commonly use 74-position 0.050" pitch connectors like TFC-137-02-F-D-A. These applications require reliable operation at temperatures from -40°C to +85°C and expect the connector to sustain hundreds of board insertion/removal cycles during commissioning and maintenance without degraded contact resistance.
What mating connector family is compatible with TFC-137-02-F-D-A and how should pin 1 orientation be verified?
The TFC-137-02-F-D-A mates with SAMTEC TFM-series receptacles and compatible 0.050" dual-row pin headers. Pin 1 is typically indicated by a chamfer on one corner of the connector housing and a square pad on the PCB footprint. Verifying pin 1 orientation before first mating is critical on 74-position connectors because a misaligned insertion can damage all 74 contacts simultaneously, and the connector body is approximately 1.85" long with no keying features in the basic TFC series.
Related Guides
How to Choose a Digital Potentiometer: AD5204, AD5206, and AD8403 Selection Guide
Compare the AD5204, AD5206, and AD8403 multi-channel SPI digipots by channel count, resistance value, and package to choose the right Analog Devices digital potentiometer for your design.
Jun 21, 2026
AD7745 / AD7746 / AD7747 Capacitance-to-Digital Converter Design Guide
Complete application note for the AD774x CDC family: circuit design, shielding, conversion rate selection, and sourcing guidance for the AD7745, AD7746, and AD7747.
Jun 21, 2026
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”