TFC-128-02-LM-D-A-K-TR SAMTEC Connector (Other) In Stock
SAMTEC TFC-128-02-LM-D-A-K-TR is a 56-position, dual-row Tiger Eye terminal strip at 1.27 mm (0.050 inch) pitch in a tape-and-reel SMT package. Offers cost-effective high-density interconnection rated to 1.5 A per contact.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 56
- Lifecycle
- ACTIVE
- Datasheet
- TFC-128-02-LM-D-A-K-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 56 dual-row positions at 1.27 mm (0.050 inch) pitch for ultra-compact PCB layouts
- Tiger Eye contact technology providing reliable 1.5 A per pin current capacity
- Tape-and-reel packaging (TR) optimized for high-volume automated SMT assembly
Applications
The TFC-128-02-LM-D-A-K-TR is designed for high-density board-to-board and mezzanine connections in computing, telecommunications, and portable medical equipment. Its 1.27 mm pitch delivers 56 dual-row contacts within a minimal PCB footprint, enabling dense system integration. The tape-and-reel format supports automated pick-and-place placement in high-volume production environments.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How does the 1.27 mm pitch of TFC-128-02-LM-D-A-K-TR compare to standard 2.54 mm connectors for space-constrained PCB designs?
At 1.27 mm (0.050 inch) pitch, the TFC-128-02-LM-D-A-K-TR occupies roughly half the linear footprint of standard 2.54 mm pitch connectors. This allows the 56-position dual-row connector to fit in tight board areas where a 2.54 mm equivalent would exceed available space.
What current rating and contact configuration does TFC-128-02-LM-D-A-K-TR provide?
Each contact of the TFC-128-02-LM-D-A-K-TR is rated at 1.5 A. The 56-position dual-row layout means 112 total contact positions, suitable for mixed signal and low-power supply routing on compact PCBs in telecommunications and computing equipment.
When should an engineer choose TFC-128-02-LM-D-A-K-TR over the non-tape-and-reel version for production?
The TR (tape-and-reel) suffix on TFC-128-02-LM-D-A-K-TR indicates packaging compatible with automated SMT pick-and-place machines, making it the correct choice for production volumes above a few hundred units. Manual assembly or prototyping may favor strip packaging instead, reducing per-unit cost at low quantities below 100 pieces.
Related Guides
How to Choose a Digital Potentiometer: AD5204, AD5206, and AD8403 Selection Guide
Compare the AD5204, AD5206, and AD8403 multi-channel SPI digipots by channel count, resistance value, and package to choose the right Analog Devices digital potentiometer for your design.
Jun 21, 2026
AD7745 / AD7746 / AD7747 Capacitance-to-Digital Converter Design Guide
Complete application note for the AD774x CDC family: circuit design, shielding, conversion rate selection, and sourcing guidance for the AD7745, AD7746, and AD7747.
Jun 21, 2026
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”