TFC-117-02-LM-D-A-K-TR SAMTEC Connector (Other) In Stock
SAMTEC TFC-117-02-LM-D-A-K-TR is a 34-position dual-row Tiger Eye cost-effective terminal strip with 0.050" (1.27 mm) pitch, low-profile LM contact, kinked tails, and tape-and-reel packaging for automated assembly.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 34
- Lifecycle
- ACTIVE
- Datasheet
- TFC-117-02-LM-D-A-K-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TFC-117-02-LM-D-A-K-TR?
- 34-position dual-row terminal strip with 0.050" (1.27 mm) pitch for mid-density board-to-board signal connections
- Low-profile LM contact style reduces above-board height, enabling tighter PCB-to-PCB stacking clearances
- Kinked (K) through-hole tail mechanically stabilizes 17-positions-per-row connector during PCB soldering
- Tape-and-reel (TR) packaging supports automated pick-and-place assembly in high-volume production environments
What is TFC-117-02-LM-D-A-K-TR used for?
The TFC-117-02-LM-D-A-K-TR is designed for mid-density board-to-board signal interfaces in embedded system modules, industrial I/O boards, and medical instrumentation requiring 34 positions at 0.050" pitch. Its low-profile contact style minimizes board stack height, which is critical in compact multi-board assemblies. Tape-and-reel packaging enables cost-efficient automated assembly in high-volume manufacturing.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TFC-117-02-LM-D-A-K-TR datasheet?
TFC-117-02-LM-D-A-K-TR Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TFC-117-02-LM-D-A-K-TR?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What position count and pitch define the TFC-117-02-LM-D-A-K-TR signal interface?
The TFC-117-02-LM-D-A-K-TR is a 34-position dual-row terminal strip with 0.050" (1.27 mm) pitch, providing 17 positions per row. This mid-density configuration suits embedded system daughterboards and industrial I/O modules that need more than 20 but fewer than 50 signal positions in a compact 0.050" pitch footprint.
How does the low-profile LM contact style on the TFC-117-02-LM-D-A-K-TR benefit stacked board designs?
The LM (low-profile mating) contact on the TFC-117-02-LM-D-A-K-TR reduces the connector height above the PCB surface compared to standard mating height variants. In stacked-board assemblies using this 34-position connector at 0.050" pitch, the reduced stack height allows tighter board-to-board clearance, enabling more compact end-product enclosures.
Why is tape-and-reel (TR) packaging preferred for the TFC-117-02-LM-D-A-K-TR in production?
Tape-and-reel packaging for the TFC-117-02-LM-D-A-K-TR enables pick-and-place machines to accurately place the 34-position connector at 0.050" pitch without manual handling. This reduces placement cycle time, eliminates human positioning error, and is essential for high-volume PCB assembly lines targeting low defect rates for this fine-pitch dual-row connector.
In which application areas is the TFC-117-02-LM-D-A-K-TR a better choice than comparable 50-position connectors?
The TFC-117-02-LM-D-A-K-TR is preferred in embedded modules, medical sensor boards, and industrial I/O cards where the interface requires only 34 signal positions rather than 50, avoiding unnecessary PCB area, cost, and routing complexity. Fewer positions at 0.050" pitch also reduces signal stub length on mid-density interface buses and simplifies PCB trace planning.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector