TFC-115-02-LM-D-A-K-TR SAMTEC Connector (Other) In Stock
SAMTEC TFC-115-02-LM-D-A-K-TR is a 30-position dual-row Tiger Eye cost-effective terminal strip on 0.050" (1.27 mm) pitch, offered in tape-and-reel packaging for high-volume automated SMT assembly. Low-profile LM style suits height-restricted multi-board stacks. Available in stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 30
- Lifecycle
- ACTIVE
- Datasheet
- TFC-115-02-LM-D-A-K-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 30-position dual-row layout at 0.050" (1.27 mm) pitch delivers efficient signal density for mid-size board-to-board interfaces
- Tape-and-reel (TR) packaging optimized for automated pick-and-place SMT production lines with high component throughput
- Low-profile LM body style reduces board stack height in height-constrained enclosures and mezzanine module designs
Applications
The TFC-115-02-LM-D-A-K-TR is designed for mid-density board-to-board and mezzanine interconnects in wireless communication modules, embedded sensor hubs, and compact industrial I/O cards. With 30 positions at 1.27 mm pitch, it accommodates mixed signal and power lines in modular system architectures. The tape-and-reel format supports high-volume automated assembly in consumer electronics and IoT product manufacturing.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the position count and row structure of TFC-115-02-LM-D-A-K-TR?
The TFC-115-02-LM-D-A-K-TR provides 30 total positions in a dual-row configuration, with 15 pins per row on a 0.050" (1.27 mm) pitch. This mid-density layout is well-suited for interfaces requiring a mix of signals, power, and ground connections across adjacent PCBs, typical in wireless module carrier boards and embedded sensor node designs where 30-pin dual-row footprints are standard.
How does tape-and-reel packaging for TFC-115-02-LM-D-A-K-TR benefit high-volume manufacturing?
Tape-and-reel (TR) packaging for the TFC-115-02-LM-D-A-K-TR provides consistent component orientation and pitch feeding for automated SMT pick-and-place machines, enabling placement speeds of hundreds of components per hour without manual loading. This reduces assembly cycle time and human handling errors across large production runs, directly lowering per-unit cost for IoT and consumer electronics products that require thousands of boards per month with the 30-position 1.27 mm pitch connector.
What signal frequency range is TFC-115-02-LM-D-A-K-TR suitable for in mezzanine applications?
The TFC-115-02-LM-D-A-K-TR Tiger Eye terminal strip is suitable for signal frequencies typically up to several hundred MHz, making it appropriate for SPI, UART, I2C, and low-speed parallel bus interfaces operating below 500 MHz per pin. For applications requiring signal integrity at 1 GHz or higher, differential pair routing or impedance-controlled high-speed connectors should be considered instead. The 30-position 1.27 mm pitch format works well for general-purpose mixed I/O mezzanine connections at these moderate signal speeds.
Related Guides
How to Choose a Digital Potentiometer: AD5204, AD5206, and AD8403 Selection Guide
Compare the AD5204, AD5206, and AD8403 multi-channel SPI digipots by channel count, resistance value, and package to choose the right Analog Devices digital potentiometer for your design.
Jun 21, 2026
AD7745 / AD7746 / AD7747 Capacitance-to-Digital Converter Design Guide
Complete application note for the AD774x CDC family: circuit design, shielding, conversion rate selection, and sourcing guidance for the AD7745, AD7746, and AD7747.
Jun 21, 2026
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”