TFC-113-02-FM-D SAMTEC Connector (Other) In Stock
SAMTEC TFC-113-02-FM-D is a 26-position dual-row Tiger Eye cost-effective terminal strip connector at 1.27 mm (0.050 inch) pitch, offering reliable bifurcated contact performance for board-to-board signal connections. From $2.80 in stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 26
- Lifecycle
- ACTIVE
- Datasheet
- TFC-113-02-FM-D Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TFC-113-02-FM-D?
- 26-position dual-row configuration at 1.27 mm (0.050 inch) pitch for cost-effective high-density terminal strip interconnects
- Tiger Eye bifurcated contact design ensures 2 contact points per pin for vibration-resistant reliable mating across 200+ cycles
- FM surface mount configuration enables automated SMT placement in high-volume PCB assembly lines
- Cost-effective TFC series provides Tiger Eye contact reliability at reduced component cost versus full TFM series connectors
What is TFC-113-02-FM-D used for?
TFC-113-02-FM-D is used for high-density board-to-board and module-to-board signal connections in cost-sensitive industrial controls, consumer electronics sub-assemblies, and embedded systems requiring reliable 26-position 1.27 mm pitch interconnects. Its Tiger Eye contact technology and SMD footprint also make it appropriate for prototype mezzanine cards, FPGA daughter boards, and data acquisition modules where dual-row fine-pitch connectivity must balance cost and reliability.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TFC-113-02-FM-D datasheet?
TFC-113-02-FM-D Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TFC-113-02-FM-D?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many signal positions does TFC-113-02-FM-D provide and at what contact pitch?
TFC-113-02-FM-D provides 26 positions in a dual-row layout at 1.27 mm (0.050 inch) pitch, with 13 contacts per row. The dual-row configuration achieves approximately 10 contacts per centimeter per row, enabling high-density signal routing in compact FPGA mezzanine and data acquisition module PCB footprints.
How does the Tiger Eye contact technology in TFC-113-02-FM-D differ from single-beam contacts?
Tiger Eye contacts use a bifurcated spring with 2 independent contact beams per pin. Each beam independently wipes the mating pin, maintaining electrical continuity below 20 mΩ contact resistance even if one beam deflects due to vibration or misalignment, while single-beam contacts lose continuity under similar conditions after 100 to 200 mating cycles.
For cost-sensitive embedded systems, when is TFC-113-02-FM-D preferred over the premium TFM series connector?
TFC-113-02-FM-D is preferred when the application requires fewer than 200 mating cycles and gold-plated contacts are not needed. The TFC series achieves 30% to 40% lower cost per unit versus TFM series by using tin-plated or standard finish contacts, while still providing Tiger Eye reliability for SMT board-to-board connections at 1.27 mm pitch.
What PCB assembly process is TFC-113-02-FM-D designed for and how does the FM configuration support production?
TFC-113-02-FM-D is designed for automated SMT reflow assembly via its FM (surface mount) termination style. The SMD pad pattern is compatible with standard pick-and-place machines handling components up to 35 mm in length, enabling high-throughput production at placement rates above 5,000 components per hour on modern assembly lines.
Related Guides
TLMG1100-GS08 Indicator LED PCB Design and Validation Guide
Design and validate a TLMG1100-GS08 indicator PCB with current calculations, GPIO checks, polarity review, and enclosure tests.
Nov 7, 2026
How to Choose RK73H1ETTP1002F: Chip Resistor Selection Guide 2026
Select RK73H1ETTP1002F for 10 kΩ circuits: compare four catalog options, check power and package limits, and prepare an exact-part sourcing request.
Nov 7, 2026
ECA1JHG220: 22 µF, 63 V Electrolytic Capacitor Selection Guide
Choose ECA1JHG220 using voltage, tolerance, ripple, temperature and fit checks, with four Panasonic catalog candidates compared.
Nov 6, 2026
How to Choose an Indicator LED: TLMG1100-GS08 Selection Guide
Select TLMG1100-GS08 and evaluate four indicator LED candidates through optical, electrical, footprint, and sourcing checks.
Nov 5, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector