TFC-112-02-LM-D-A-K SAMTEC Connector (Other) In Stock
SAMTEC TFC-112-02-LM-D-A-K is a 24-position Tiger Eye dual-row cost-effective terminal strip at 1.27 mm (0.050 inch) pitch with low-profile mating height and kinked lead retention. Available from stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 24
- Lifecycle
- ACTIVE
- Datasheet
- TFC-112-02-LM-D-A-K Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TFC-112-02-LM-D-A-K?
- 24-position dual-row layout at 1.27 mm pitch provides 24 signal channels in a low-profile strip approximately 15.2 mm long
- Tiger Eye contact design delivers spring-loaded reliable mating with consistent normal force across all 24 positions
- Low-profile mating (LM) body style reduces stacking height for slim board-to-board assemblies in space-constrained enclosures
- Kinked (K) lead termination self-clinches in PCB holes or pads before reflow, minimizing connector shift during SMT soldering
What is TFC-112-02-LM-D-A-K used for?
The TFC-112-02-LM-D-A-K is ideal for compact board-to-board interconnects in handheld instrumentation, IoT gateway modules, and low-profile embedded controllers requiring 24 signal channels at 1.27 mm pitch. The low-profile mating height makes it suitable for slim stacked-board assemblies where overall system height must be minimized, such as wearable electronics or thin industrial handheld scanners. Its Tiger Eye contacts provide reliable connections in applications with moderate insertion-cycle requirements.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TFC-112-02-LM-D-A-K datasheet?
TFC-112-02-LM-D-A-K Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TFC-112-02-LM-D-A-K?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How does the low-profile mating (LM) feature of the TFC-112-02-LM-D-A-K reduce board stack height?
The LM (low-profile mating) designation means the TFC-112-02-LM-D-A-K uses a shorter housing body that reduces the mated board-to-board stack height by approximately 1 mm to 2 mm compared to standard-profile TFC variants. In a slim handheld device or wearable electronics design, this reduction can be critical when total PCB stack thickness must stay under 10 mm to fit within a compact enclosure.
What is the pin count and pitch of the TFC-112-02-LM-D-A-K and what interface density does it support?
The TFC-112-02-LM-D-A-K provides 24 positions arranged in a dual-row configuration at 1.27 mm (0.050 inch) pitch. The strip spans approximately 15.2 mm in length and supports 24 independent signal or power channels, which is sufficient for microcontroller expansion headers, sensor module interfaces, or small LCD display data buses in embedded designs requiring moderate I/O density.
How does the TFC-112-02-LM-D-A-K compare to the TFC-114-02-LM-D-A-K for a design requiring fewer than 30 channels?
When a design requires 24 channels or fewer, the TFC-112-02-LM-D-A-K is the preferred choice over the TFC-114-02-LM-D-A-K (28 positions) because it avoids unneeded positions that waste PCB area and increase BOM cost per unit. Both share the same 1.27 mm pitch, low-profile mating height, and kinked lead termination, so PCB footprints differ only in length—approximately 15.2 mm for the 24-position versus 17.8 mm for the 28-position strip.
Is the TFC-112-02-LM-D-A-K suitable for IoT or wearable designs with limited PCB space and infrequent board swaps?
Yes, the TFC-112-02-LM-D-A-K is well-matched to IoT gateways and wearable sensor platforms that are assembled once or reconfigured fewer than 50 times during their service life. The Tiger Eye contact maintains reliable electrical contact over that cycle range, the 1.27 mm pitch keeps the 24-pin footprint under 16 mm × 3 mm, and the low-profile LM body minimizes the height penalty in thin enclosures measuring as little as 8 mm in total board-to-cover clearance.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector