TFC-108-02-F-D SAMTEC Connector (Other) In Stock
SAMTEC TFC-108-02-F-D is a 16-position Tiger Eye cost-effective terminal strip with 0.050" (1.27 mm) pitch for board stacking applications. Features gold flash mating contacts with tin-nickel termination contacts for reliable, low-cost board-to-board connections. From $1.80, in stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 16
- Lifecycle
- ACTIVE
- Datasheet
- TFC-108-02-F-D Datasheet PDF
- Category
- Connector
- Price
- From $0.8167(MOQ 42)
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TFC-108-02-F-D?
- 16-position dual-row board stacking connector at 0.050" (1.27 mm) pitch for high-density signal routing
- Tiger Eye contact technology with gold flash mating surface delivers reliable low-resistance connections at reduced cost
- Tin (Sn) with nickel (Ni) barrier termination contacts resist corrosion and provide robust solder joint reliability
- Cost-effective Tiger Eye design offers a budget-friendly alternative to premium contacts without sacrificing contact integrity
What is TFC-108-02-F-D used for?
The TFC-108-02-F-D is suited for board stacking applications in consumer electronics, industrial control modules, and compact embedded systems where a 0.050" pitch 16-position interface is required. Its gold flash mating contacts make it an economical choice for prototyping and moderate-volume production runs. The dual-row layout enables high signal density in space-constrained PCB designs such as SOM carrier boards and expansion modules.
What are the specifications of TFC-108-02-F-D?
| Pbfree Code | Yes |
| YTEOL | 8.65 |
| Connector Type | BOARD STACKING CONNECTOR |
| Contact Finish Mating | GOLD FLASH (3) |
| Contact Finish Termination | Tin (Sn) - with Nickel (Ni) barrier |
| Contact Gender | MALE |
| Contact Material | NOT SPECIFIED |
| DIN Conformance | NO |
| Filter Feature | NO |
| IEC Conformance | NO |
| JESD-609 Code | e3 |
| MIL Conformance | NO |
| Mixed Contacts | NO |
| Mounting Style | STRAIGHT |
| Mounting Type | BOARD |
| Number Of Connectors | ONE |
| Number of Rows Loaded | 2 |
| Option | GENERAL PURPOSE |
| Rated Current (Signal) | 3.1A |
| Terminal Pitch | 1.27mm |
| Termination Type | SOLDER |
| Total Number of Contacts | 16 |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8536.69.40.40 |
| Country of Origin | Malaysia, USA |
Where can I find the TFC-108-02-F-D datasheet?
TFC-108-02-F-D Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TFC-108-02-F-D?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What pitch and position count does the TFC-108-02-F-D offer, and how does it compare to standard 0.100" connectors?
The TFC-108-02-F-D features a 0.050" (1.27 mm) pitch with 16 positions in a dual-row layout, achieving twice the contact density of a standard 0.100" pitch connector in the same board length, making it ideal for compact board stacking designs where space is limited.
What contact finish does the TFC-108-02-F-D use for mating and termination, and what are the reliability implications?
The TFC-108-02-F-D uses gold flash (3 micro-inches) on mating contacts and tin (Sn) with a nickel (Ni) barrier on termination contacts. Gold flash provides low contact resistance below 20 milliohms and corrosion resistance for moderate mating cycles, while the nickel barrier prevents tin whisker migration into the contact interface.
Is the TFC-108-02-F-D compatible with lead-free soldering, and what current rating should designers expect per contact?
Yes, the TFC-108-02-F-D is RoHS-compliant and compatible with lead-free soldering at peak temperatures up to 260°C. Each contact is rated to carry approximately 1 A of current at 0.050" pitch, supporting typical logic and low-power signal applications in industrial and consumer board stacking designs.
When would a designer choose TFC-108-02-F-D over a higher-end gold-plated SAMTEC connector for a board stacking interface?
A designer would choose the TFC-108-02-F-D Tiger Eye cost-effective series when the mating cycle count is under 50 cycles, the operating environment is non-corrosive, and the design budget is constrained. At 0.050" pitch with 16 positions, it delivers 16 signal lines in under 12 mm of board length at a significantly lower cost than fully gold-plated alternatives.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 42+ | $2.5900 | $108.78 |
| 500+ | $1.5800 | $790.00 |
| 1000+ | $1.3500 | $1350.00 |
| 2000+ | $1.0904 | $2180.72 |
| 5000+ | $0.9341 | $4670.65 |
| 10000+ | $0.8167 | $8166.70 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector