TFC-107-02-LM-D-A SAMTEC Connector (Other) In Stock
SAMTEC TFC-107-02-LM-D-A is a 14-position Tiger Eye cost-effective terminal strip on 0.050" pitch with dual-row male contacts for compact board-to-board or board-to-flex signal interconnects. Available from stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 14
- Lifecycle
- ACTIVE
- Datasheet
- TFC-107-02-LM-D-A Datasheet PDF
- Category
- Connector
- Price
- From $1.0600(MOQ 2500)
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TFC-107-02-LM-D-A?
- 14-position dual-row 0.050" pitch layout providing high signal density in a compact body suitable for handheld and portable PCB designs
- Tiger Eye dual-beam contacts delivering 2 independent contact wipe points per pin for reliable low-resistance mating across repeated cycles
- Low-profile cost-effective construction enabling affordable 14-pin board interconnects in high-volume consumer electronics and IoT modules
What is TFC-107-02-LM-D-A used for?
TFC-107-02-LM-D-A suits compact board-to-board and board-to-flex signal interconnects in portable medical devices, wearable electronics, and handheld instruments requiring 14-pin connectivity at minimum PCB area. Its Tiger Eye contact geometry ensures consistent mating performance in vibrating environments such as industrial sensor nodes, automotive accessory modules, and robotics control boards. The cost-effective design supports high-volume production where per-connector BOM cost reduction across 14 signal channels is a key procurement goal.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the TFC-107-02-LM-D-A datasheet?
TFC-107-02-LM-D-A Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for TFC-107-02-LM-D-A?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many signal positions does TFC-107-02-LM-D-A support and on what pitch for dense PCB routing?
TFC-107-02-LM-D-A provides 14 positions on a 0.050-inch pitch in a dual-row male configuration, enabling high-density signal routing across a connector body roughly half the length of an equivalent 0.100-inch pitch strip. This makes it well-suited for SoC daughtercards, sensor modules, and embedded controller interfaces with limited board edge space.
What mechanical advantage does the Tiger Eye contact in TFC-107-02-LM-D-A provide for vibration-prone applications?
The Tiger Eye dual-beam contact applies 2 independent spring forces against the mating socket, maintaining electrical contact even if one beam deflects slightly due to vibration or thermal expansion. This redundant 2-point contact mechanism keeps resistance stable across the 14-pin interface in automotive accessories, robotics joints, and industrial field sensors subject to continuous mechanical vibration.
When does a designer choose TFC-107-02-LM-D-A over a 14-position 0.100\" pitch alternative for space-limited board designs?
TFC-107-02-LM-D-A is chosen when the available PCB connector zone is shorter than 0.75 inches but still requires 14 signal connections, as its 0.050-inch pitch body occupies approximately half the footprint of a 0.100-inch pitch equivalent. This trade-off is practical for wearable devices, portable meters, and miniaturized IoT nodes where every millimeter of PCB length reduces the enclosure size.
How does TFC-107-02-LM-D-A's low-cost construction compare to precision terminal strips for high-volume production budgets?
SAMTEC's cost-effective TFC series uses standard stamped contacts and simplified housing compared to high-precision or impedance-controlled terminal strips, reducing per-unit connector cost without sacrificing the Tiger Eye dual-beam contact reliability for DC and low-frequency signal lines. For designs with 14 channels ordered at 5000 or more pieces, the TFC series typically offers a 20-30% cost reduction versus precision alternatives with equivalent mechanical mating performance.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 2500+ | $1.3000 | $3250.00 |
| 5000+ | $1.0900 | $5450.00 |
| 7500+ | $1.0600 | $7950.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector