TFC-106-02-L-D-A-K SAMTEC Connector (Other) In Stock
SAMTEC TFC-106-02-L-D-A-K is a 12-position dual-row Tiger Eye cost-effective terminal strip with 0.050" (1.27 mm) pitch in a right-angle through-hole configuration. Tiger Eye contacts deliver high normal force ensuring reliable low-resistance mating across hundreds of insertion cycles. Available from SAMTEC and its authorized global distribution partners.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 12
- Lifecycle
- ACTIVE
- Datasheet
- TFC-106-02-L-D-A-K Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 12-position dual-row 0.050" (1.27 mm) pitch design fits 12 signals in a compact 0.30 inch body length for space-constrained PCB applications
- Tiger Eye contact geometry applies enhanced normal contact force compared to standard stamped contacts, ensuring reliable mating with matched socket strips
- Right-angle through-hole termination (L) enables horizontal signal routing and board edge access in panel-mounted or chassis-constrained assemblies
Applications
The TFC-106-02-L-D-A-K is suited for compact board-to-board and card-edge signal interfaces in embedded computing, industrial sensor modules, and portable instruments where 12 dual-row signals must be routed at 1.27 mm pitch in a minimal footprint. Its right-angle orientation allows connectors to be accessed from the PCB edge, simplifying cable routing in enclosed chassis designs. The Tiger Eye contacts mate reliably with SAMTEC SFM and TSM series socket strips, providing a matched interconnect solution for low-density, space-critical designs.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How compact is the TFC-106-02-L-D-A-K, and how does its size compare to a 2.54 mm pitch 12-pin connector?
At 0.050" (1.27 mm) pitch, the TFC-106-02-L-D-A-K body spans approximately 0.30 inches for 12 dual-row positions, while a comparable 2.54 mm pitch 12-pin connector would require about 0.60 inches. This 50% reduction in connector body length is significant for compact PCBs in IoT sensor modules, wearables, or miniature industrial controllers where every millimeter of board space is constrained.
Which SAMTEC mating sockets pair with TFC-106-02-L-D-A-K, and what is the contact performance specification?
The TFC-106-02-L-D-A-K mates with SAMTEC SFM-106 and TSM-106 dual-row socket strips at 0.050" (1.27 mm) pitch. These matched sockets specify contact resistance below 20 mΩ per pin and support current ratings up to 1 A per contact at 25°C. The 12-position Tiger Eye mated pair is characterized for up to 500 insertion cycles, making it durable for field-replaceable module applications.
When is the right-angle (L) termination of TFC-106-02-L-D-A-K preferable over a vertical mount option?
The right-angle (L) termination on TFC-106-02-L-D-A-K is preferable when the board assembly is mounted in an enclosure where the mating connector must be accessed from the PCB edge rather than from above. This orientation reduces the required clearance height above the PCB to less than 5 mm while allowing horizontal insertion of the mating socket, which is essential in flat-profile industrial sensor panels, DIN-rail modules, and chassis-mounted cards with limited vertical clearance above the PCB surface.
Related Guides
How to Choose a Digital Potentiometer: AD5204, AD5206, and AD8403 Selection Guide
Compare the AD5204, AD5206, and AD8403 multi-channel SPI digipots by channel count, resistance value, and package to choose the right Analog Devices digital potentiometer for your design.
Jun 21, 2026
AD7745 / AD7746 / AD7747 Capacitance-to-Digital Converter Design Guide
Complete application note for the AD774x CDC family: circuit design, shielding, conversion rate selection, and sourcing guidance for the AD7745, AD7746, and AD7747.
Jun 21, 2026
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”