T1M-17-F-SV-L-P SAMTEC Connector (Other) In Stock
T1M-17-F-SV-L-P is a Samtec 17-position single-row discrete wire terminal strip with 1.00 mm pitch and a vertical orientation for fine-pitch wire-to-board termination. The locking retention mechanism secures individual wire terminations against pull-out forces in portable and densely wired assemblies. Available from Samtec with global distribution for low-quantity and production orders.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 17
- Lifecycle
- ACTIVE
- Datasheet
- T1M-17-F-SV-L-P Datasheet PDF
- Category
- Connector
- Price
- From $1.2054(MOQ 1)
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of T1M-17-F-SV-L-P?
- 17-position single-row configuration at 1.00 mm pitch for ultra-fine-pitch wire-to-board connections in a 17 mm wide footprint
- Locking wire retention tab on each position prevents accidental wire pull-out in vibration-prone portable applications
- Vertical discrete wire format accepts 26–30 AWG wire, minimising cable harness bulk in tight enclosure layouts
What is T1M-17-F-SV-L-P used for?
T1M-17-F-SV-L-P is used in portable medical devices, robotics arm controllers, and handheld test instruments where 17 independent signal lines must terminate onto a PCB in a 17 mm linear span at 1.00 mm pitch. Its single-row vertical design keeps cable routing flat against the board surface, reducing harness height inside slim enclosures. The locking contacts also make it a reliable choice for field-replaceable wiring in industrial sensor modules subject to vibration and repeated assembly.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the T1M-17-F-SV-L-P datasheet?
T1M-17-F-SV-L-P Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for T1M-17-F-SV-L-P?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many positions does T1M-17-F-SV-L-P offer and over what PCB span?
T1M-17-F-SV-L-P provides 17 positions spaced at 1.00 mm pitch, occupying a PCB footprint of approximately 17 mm in the row direction. Each position accepts one discrete wire, so the strip can terminate a 17-conductor cable harness in a linear footprint narrower than most dual-row 2.00 mm connectors of similar count.
What wire gauge range is compatible with T1M-17-F-SV-L-P terminal contacts?
T1M-17-F-SV-L-P contacts are designed for 26 AWG to 30 AWG discrete wire, with conductor cross-sections from approximately 0.05 mm² to 0.13 mm². Using thicker wire (24 AWG or larger) risks damaging the 1.00 mm pitch housing during insertion, while wire thinner than 30 AWG may not make reliable electrical contact with the terminal.
How does T1M-17-F-SV-L-P compare to T1M-09-F-SV-L-K for an application needing more than 9 signal lines?
T1M-17-F-SV-L-P adds 8 more positions than the 9-position T1M-09-F-SV-L-K, extending the strip to 17 mm versus 9 mm, while maintaining the same 1.00 mm pitch and locking mechanism. When a design requires 10–17 signal wires, T1M-17-F-SV-L-P eliminates the need for two separate shorter connectors, reducing BOM entries and potential connector-to-connector misalignment.
In which portable electronics scenarios does the locking feature of T1M-17-F-SV-L-P provide the most benefit?
The per-position locking tab on T1M-17-F-SV-L-P is most valuable in handheld medical instruments, field-deployed sensors, and wearable robotics where connectors may experience pull forces of 1 N to 5 N during cable flexing or device drops. Without the locking feature, fine-pitch 1.00 mm wire terminations can back out at forces as low as 0.5 N, causing intermittent open-circuit faults in critical signal paths.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $3.9100 | $3.91 |
| 500+ | $2.4100 | $1205.00 |
| 1000+ | $1.9700 | $1970.00 |
| 2000+ | $1.6880 | $3375.90 |
| 5000+ | $1.4419 | $7209.60 |
| 8750+ | $1.2054 | $10547.25 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector