T1M-08-F-SV-L-K SAMTEC Connector (Other) In Stock
The SAMTEC T1M-08-F-SV-L-K is an 8-position, 1.00mm pitch single-row vertical discrete wire terminal strip designed for fine-pitch wire termination in compact PCB assemblies. It features a female contact gender with SV solderless vertical termination for tool-free assembly. Available in stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- T1M-08-F-SV-L-K Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of T1M-08-F-SV-L-K?
- 8-position single-row vertical layout at 1.00mm pitch for ultra-compact wire-to-board connections
- Female SV (solderless vertical) termination allows tool-free, solder-free wire attachment for rapid prototyping and rework
- Discrete wire terminal strip design supports individual wire routing without a pre-made harness
What is T1M-08-F-SV-L-K used for?
The SAMTEC T1M-08-F-SV-L-K is ideal for compact consumer electronics, medical wearables, and miniature industrial sensors requiring a low-profile 8-position 1.00mm pitch wire-to-board interface. Its solderless vertical termination simplifies field wiring and reduces assembly labor in designs where individual discrete wires must connect directly to a PCB without custom cable harnesses.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the T1M-08-F-SV-L-K datasheet?
T1M-08-F-SV-L-K Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for T1M-08-F-SV-L-K?
Compatible alternatives and drop-in replacements for T1M-08-F-SV-L-K:
Board Connector, 8 Contact(s), 1 Row(s), Male, Straight, 0.039 inch Pitch, Surface Mount Terminal, Locking, Natural Insulator
Frequently Asked Questions
What pitch and position count does the T1M-08-F-SV-L-K offer for wire-to-board connections?
The T1M-08-F-SV-L-K provides 8 positions at a 1.00mm pitch in a single-row vertical orientation. This fine pitch allows 8 discrete wires to connect within a very small board footprint, making it suitable for compact sensor modules, wearable devices, and miniature industrial assemblies where PCB real estate is limited.
How does the SV solderless termination on the T1M-08-F-SV-L-K simplify assembly compared to solder-cup connectors?
The SV (solderless vertical) termination grips individual wire conductors mechanically, eliminating the need for soldering irons, flux, and heat. This reduces assembly time per connector to under 1 minute per wire for trained technicians, and supports rework without risk of thermal damage to adjacent SMT components on the same PCB.
Which applications benefit most from the T1M-08-F-SV-L-K's discrete wire terminal strip design?
Applications that route individual 28 AWG to 32 AWG wires directly to a PCB — such as medical diagnostic probes, miniature robotics joints, and portable test instruments — benefit most from the T1M-08-F-SV-L-K. The 8-position 1.00mm pitch layout avoids the added bulk of a pre-made multi-conductor harness while still providing 8 independent signal or power channels.
When is the T1M-08-F-SV-L-K a better choice than a standard 2.54mm pitch terminal strip with the same position count?
The T1M-08-F-SV-L-K's 1.00mm pitch reduces the connector's footprint by approximately 60% compared to a standard 2.54mm pitch 8-position terminal strip. This size reduction matters in designs where the connector zone on the PCB is limited to less than 10mm, such as hearing aids, endoscopy modules, or ultra-thin IoT sensors where every square millimetre of board area is contested.
Related Guides
TLMG1100-GS08 Indicator LED PCB Design and Validation Guide
Design and validate a TLMG1100-GS08 indicator PCB with current calculations, GPIO checks, polarity review, and enclosure tests.
Nov 7, 2026
How to Choose RK73H1ETTP1002F: Chip Resistor Selection Guide 2026
Select RK73H1ETTP1002F for 10 kΩ circuits: compare four catalog options, check power and package limits, and prepare an exact-part sourcing request.
Nov 7, 2026
ECA1JHG220: 22 µF, 63 V Electrolytic Capacitor Selection Guide
Choose ECA1JHG220 using voltage, tolerance, ripple, temperature and fit checks, with four Panasonic catalog candidates compared.
Nov 6, 2026
How to Choose an Indicator LED: TLMG1100-GS08 Selection Guide
Select TLMG1100-GS08 and evaluate four indicator LED candidates through optical, electrical, footprint, and sourcing checks.
Nov 5, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector