STM8L152K4T3 STMicroelectronics Integrated Circuit (Quad Flat Packages) In Stock
The STM8L152K4T3 is an ultra-low-power 8-bit microcontroller running at up to 16 MHz with 16 KB Flash, integrated EEPROM, ADC, DAC, and DMA in a compact LQFP-32 package. Designed for energy-harvesting and battery-powered applications with standby current in the nanoampere range. Available from stock worldwide with fast shipping.
- Manufacturer
- STMicroelectronics
- Package
- Quad Flat Packages
- Pin Count
- 32
- Lifecycle
- OBSOLETE
- Datasheet
- STM8L152K4T3 Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of STM8L152K4T3?
- Ultra-low-power consumption with halt mode current below 400 nA enables multi-year coin-cell battery life in wireless sensor nodes
- Integrated EEPROM eliminates external non-volatile memory cost and board space in data-logging and configuration-storage applications
- 16 MHz STM8 CPU core with 16 KB Flash, hardware ADC, DAC, and DMA in a single LQFP-32 package reduces BOM complexity
- Multiple low-power stop and halt modes with fast wake-up times under 5 µs allow aggressive duty-cycling for energy-constrained designs
What is STM8L152K4T3 used for?
The STM8L152K4T3 is designed for ultra-low-power applications such as wireless sensor nodes, smart meters, wearable health monitors, and remote controls where battery life of several years from a coin cell is required. Its integrated ADC and DAC support analog front-end signal conditioning without external components, making it ideal for environmental sensors measuring temperature, humidity, or gas concentration. The LQFP-32 package and 16 MHz core provide sufficient processing power for simple human-machine interfaces, LCD segment driving, and low-data-rate wireless protocol stacks.
What are the specifications of STM8L152K4T3?
| YTEOL | 0 |
| Has ADC | YES |
| Bit Size | 8 |
| Boundary Scan | NO |
| CPU Family | ST8 |
| Clock Frequency-Max | 16MHz |
| DAC Channels | YES |
| DMA Channels | YES |
| JESD-30 Code | S-PQFP-G32 |
| JESD-609 Code | e3 |
| Number of I/O Lines | 24 |
| On Chip Program ROM Width | 8 |
| PWM Channels | YES |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | QFP32,.35SQ,32 |
| Package Shape | SQUARE |
| Package Style | FLATPACK, LOW PROFILE |
| Qualification Status | Not Qualified |
| RAM (bytes) | 2048 |
| ROM (words) | 16384 |
| ROM Programmability | FLASH |
| Speed | 16MHz |
| Supply Current-Max | 80mA |
| Supply Voltage-Max | 3.6V |
| Supply Voltage-Min | 1.65V |
| Supply Voltage-Nom | 3V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | TIN |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.8mm |
| Terminal Position | QUAD |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Package | Quad Flat Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 3 |
| HTS Code | 8542.31.00.15 |
Where can I find the STM8L152K4T3 datasheet?
STM8L152K4T3 Datasheet DownloadOfficial datasheet from STMicroelectronics
What are equivalent replacements for STM8L152K4T3?
Compatible alternatives and drop-in replacements for STM8L152K4T3:
Frequently Asked Questions
How low is the current consumption of STM8L152K4T3 in halt mode, and how does this affect battery life?
In halt mode the STM8L152K4T3 consumes less than 400 nA from a 3 V supply, with the RTC running from a 32.768 kHz watch crystal. For a duty cycle of 1 wake-up per second with 1 ms active time at 16 MHz, the average supply current is approximately 5 µA, allowing a standard 225 mAh CR2032 coin cell to last over 5 years without replacement in a simple sensor-reporting application.
What non-volatile storage does STM8L152K4T3 integrate, and why does it eliminate an external EEPROM?
The STM8L152K4T3 integrates on-chip data EEPROM alongside its 16 KB Flash program memory, providing byte-level writeable non-volatile storage rated for at least 300,000 erase-write cycles at +25°C. This built-in EEPROM removes the need for an external I2C or SPI EEPROM in designs that store calibration coefficients, device configuration, or event logs, saving one component, reducing I2C bus overhead, and eliminating an additional supply bypass capacitor.
For a wearable sensor design, what analog peripherals does STM8L152K4T3 integrate at 3 V supply?
At a 3.3 V supply the STM8L152K4T3 integrates a 12-bit successive-approximation ADC with up to 25 channels, a 12-bit DAC output for analog signal generation, a hardware comparator, and a DMA controller for autonomous ADC-to-memory transfers without CPU intervention. This combination eliminates external ADC and DAC ICs for most wearable applications such as ECG front ends, pulse-oximetry sensors, and temperature compensation circuits in the LQFP-32 package.
When should a designer choose STM8L152K4T3 over an ARM Cortex-M0 part for a battery-powered IoT node?
STM8L152K4T3 is the better choice when the design requires sub-microampere halt current, a simple 8-bit instruction set for smaller code size, and integrated EEPROM—features that many entry-level Cortex-M0 parts lack or offer at higher current. At 16 MHz and 3 V, the STM8L core active current is typically 4 mA versus 6-10 mA for comparable Cortex-M0 devices, resulting in meaningfully longer battery life for duty-cycled IoT sensor nodes transmitting short data packets less than once per minute.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About STMicroelectronics
STMicroelectronics is a global semiconductor leader serving customers across the spectrum of electronics applications. ST's products are found in a wide range of applications including automotive, industrial, personal electronics, and communications.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit