SN74HC05DE4 Texas Instruments Integrated Circuit (Small Outline Packages) In Stock
The SN74HC05DE4 is a hex inverter with open-drain outputs in the HC/UH CMOS logic family, supporting 2 V to 6 V supply operation and six independent single-input inverter channels. Open-drain outputs allow wired-AND bus sharing and voltage level translation up to the external pull-up rail. Available from authorized distributors with worldwide shipping.
- Manufacturer
- Texas Instruments
- Package
- Small Outline Packages
- Pin Count
- 14
- Lifecycle
- OBSOLETE
- Datasheet
- SN74HC05DE4 Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of SN74HC05DE4?
- Open-drain outputs on all 6 channels enable wired-AND logic and passive voltage level translation to 5 V from a 3.3 V logic supply
- HC CMOS family operation from 2 V to 6 V with rail-to-rail compatibility supports both 3.3 V and 5 V mixed-voltage systems
- 6 independent inverter channels in a 14-pin package reduce component count and board area in multi-signal inversion applications
What is SN74HC05DE4 used for?
The SN74HC05DE4 is used in microcontroller interface circuits to translate 3.3 V open-drain I2C or SMBus signals to a 5 V bus by connecting the pull-up resistors to a 5 V rail, enabling legacy 5 V peripherals to communicate with modern 3.3 V SoCs. It serves in LED driver arrays and relay activation circuits where open-drain outputs directly sink current through the load without needing a separate driver transistor. The device is also found in programmable logic reset distribution circuits and bus arbitration designs where wired-AND combining of multiple open-drain inverter outputs implements a hardware fault-OR function.
What are the specifications of SN74HC05DE4?
| Pbfree Code | Yes |
| YTEOL | 0 |
| Family | HC/UH |
| JESD-30 Code | R-PDSO-G14 |
| JESD-609 Code | e4 |
| Load Capacitance (CL) | 50pF |
| Logic IC Type | INVERTER |
| Max I(ol) | 0.006A |
| Number of Functions | 6 |
| Number of Inputs | 1 |
| Output Characteristics | OPEN-DRAIN |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOP14,.25 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE |
| Packing Method | TUBE |
| Peak Reflow Temperature (Cel) | 260 |
| Power Supply Current-Max (ICC) | 0.02mA |
| Prop. Delay@Nom-Sup | 29ns |
| Propagation Delay (tpd) | 145ns |
| Qualification Status | Not Qualified |
| Schmitt Trigger | NO |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Form | GULL WING |
| Terminal Pitch | 1.27mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Malaysia |
Where can I find the SN74HC05DE4 datasheet?
SN74HC05DE4 Datasheet DownloadOfficial datasheet from Texas Instruments
What are equivalent replacements for SN74HC05DE4?
Compatible alternatives and drop-in replacements for SN74HC05DE4:
Frequently Asked Questions
How do the open-drain outputs of SN74HC05DE4 enable voltage level translation between 3.3 V and 5 V logic?
With open-drain outputs, SN74HC05DE4 can pull a signal low to ground but relies on an external pull-up resistor tied to a 5 V rail for the high state. A 3.3 V input signal drives the gate while the output swings to 5 V through the pull-up, achieving bidirectional level translation with no active circuitry beyond the 4.7 kΩ to 10 kΩ pull-up resistor.
What is the maximum sink current per output pin of SN74HC05DE4?
Each open-drain output of SN74HC05DE4 can sink up to 6 mA at VOL below 0.33 V when operating from a 4.5 V supply. This is sufficient to drive small indicator LEDs directly through a 470 Ω series resistor or to pull down I2C bus lines at standard 400 kHz fast-mode speeds with the recommended 1 kΩ to 4.7 kΩ pull-up resistors.
How does SN74HC05DE4 compare to SN74HC04 for implementing wired-AND bus logic?
SN74HC04 has totem-pole push-pull outputs that cannot be wire-connected without bus contention, while SN74HC05DE4 open-drain outputs can share a common pull-up resistor to form a wired-AND node. Any of the 6 channels pulling low drives the shared node low, implementing a fault-reporting bus where multiple independent sources can assert the same interrupt line without external diodes.
At what supply voltage does SN74HC05DE4 achieve its fastest propagation delay for high-speed applications?
The SN74HC05DE4 achieves its minimum propagation delay of approximately 7 ns at a 6 V supply with a 50 pF load. At 5 V the typical propagation delay rises to about 10 ns, and at 2 V it increases to roughly 40 ns, so designs that require timing below 10 ns should operate from a 5 V or 6 V supply rail.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
More from Texas Instruments
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit