PDTD114EU Nexperia Transistor RET NPN (SOT23 (3-Pin)) In Stock

Nexperia PDTD114EU is a single NPN digital transistor with built-in 10 kΩ/10 kΩ bias resistors in a compact SOT-323 package, rated at 50 V and 0.5 A. Minimum DC current gain (hFE) of 70 enables direct logic-level drive without external resistors. Available in stock worldwide with fast shipping.

ACTIVETransistor RET NPNVerified Jul 2026
Package / Visual Reference
PDTD114EUSOT23 (3-Pin)
Quick Facts
Manufacturer
Nexperia
Package
SOT23 (3-Pin)
Pin Count
3
Lifecycle
ACTIVE
Category
Transistor RET NPN
Temp Range
-55.0°C to 175.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of PDTD114EU?

  • Integrated 10 kΩ/10 kΩ bias resistor network (ratio 1:1) eliminates external base resistors, reducing BOM count and PCB footprint
  • 50 V collector-emitter voltage and 0.5 A collector current rating cover a wide range of switching and load control applications
  • Ultra-compact SOT-323 (SC-70) package with 3 pins occupies minimal PCB area, ideal for space-constrained consumer and industrial designs

What is PDTD114EU used for?

The PDTD114EU is ideal for logic-level switching applications such as microcontroller-driven relay drivers, LED on/off controls, and signal inversion circuits where direct GPIO interface without external base resistors is required. Its 50 V, 0.5 A ratings support small actuator switching in home automation, portable consumer electronics, and industrial sensor interfaces. The SOT-323 package allows dense placement in multi-channel switching arrays on compact PCBs for wearables, IoT modules, and handheld instruments.

What are the specifications of PDTD114EU?

Date Of Intro2017-02-17
YTEOL7
Additional FeatureBUILT IN BIAS RESISTANCE RATIO IS 1
Collector Current-Max (IC)0.5A
Collector-Base Capacitance-Max7pF
Collector-Emitter Voltage-Max50V
ConfigurationSINGLE WITH BUILT-IN RESISTOR
DC Current Gain-Min (hFE)70
JESD-30 CodeR-PDSO-G3
Number of Elements1
Package Body MaterialPLASTIC/EPOXY
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE
Polarity/Channel TypeNPN
Power Dissipation-Max (Abs)0.425W
Reference StandardIEC-60134
Surface MountYES
Terminal FormGULL WING
Terminal PositionDUAL
Transistor ApplicationSWITCHING
Transistor Element MaterialSILICON
Transition Frequency-Nom (fT)225MHz
VCEsat-Max0.1V
PackageSOT23 (3-Pin)

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
Country of OriginMalaysia

Where can I find the PDTD114EU datasheet?

PDTD114EU Datasheet Download

Official datasheet from Nexperia

What are equivalent replacements for PDTD114EU?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What do the built-in 10 kΩ/10 kΩ resistors in the PDTD114EU allow in circuit design?

The integrated 10 kΩ input resistor and 10 kΩ base-emitter resistor (R1/R2 ratio of 1) allow direct connection to 3.3 V or 5 V logic outputs without external base resistors, simplifying PCB layout. With a minimum hFE of 70, the PDTD114EU switches into saturation from a 3.3 V GPIO at currents as low as 0.33 mA, which most microcontrollers can comfortably source.

What is the collector-emitter voltage limit of the PDTD114EU, and how does it fit relay or solenoid switching?

With a maximum VCE of 50 V, the PDTD114EU can switch inductive loads such as 12 V or 24 V relays and solenoids when a flyback diode is added across the coil. At 0.5 A maximum collector current, it supports relay coils drawing up to 100 mA to 500 mA, covering most latching and non-latching PCB relay designs used in automation and HVAC control boards.

How does the SOT-323 package size of the PDTD114EU compare to standard SOT-23, and why does it matter for dense PCB layouts?

The SOT-323 package measures approximately 2.0 mm × 2.1 mm, roughly 40% smaller in footprint area than the standard SOT-23 at 2.9 mm × 1.3 mm, enabling tighter placement in multi-channel switching arrays. This size advantage allows designers to fit 8 or more PDTD114EU transistors in the area that standard SOT-23 packages would need for 5, significantly increasing switching density on IoT and wearable PCBs.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Nexperia

Nexperia is a leading electronic component manufacturer. FindMyChip sources Nexperia ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.

TM
Thomas Mueller
Hardware Lead, SensorTech GmbH, Germany