MCP4531-103E/MS Microchip Integrated Circuit (Small Outline Packages) In Stock

MCP4531-103E/MS is a single-channel 7-bit I2C digital potentiometer from Microchip with a 10 kΩ end-to-end resistance, 128 wiper positions, and 2 kHz bandwidth in an 8-pin MSOP package. It enables software-controlled analog adjustment for gain, offset, and bias tuning in embedded systems.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MCP4531-103E/MSSmall Outline Packages
Quick Facts
Manufacturer
Microchip
Package
Small Outline Packages
Pin Count
8
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $0.6100(MOQ 1)
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • 7-bit resolution with 128 wiper positions for fine analog control
  • 10 kΩ end-to-end resistance (also available in 5 kΩ and 50 kΩ)
  • I2C (2-wire serial) interface for simple microcontroller integration
  • 2 kHz bandwidth supporting audio-frequency analog adjustment
  • Single-channel design in compact 8-pin MSOP package
  • Non-volatile or volatile wiper position options across MCP453x family

Applications

The MCP4531-103E/MS enables digitally programmable analog tuning in applications such as programmable gain amplifier stages, LCD contrast adjustment, sensor offset calibration, and audio volume control where manual trimmer potentiometers are replaced by software-controlled adjustment. Its I2C interface allows a microcontroller to set any of the 128 wiper positions over a 2-wire bus, simplifying closed-loop calibration routines. The compact 8-pin MSOP footprint suits space-constrained analog front-end modules in portable instruments and industrial sensor nodes.

Specifications

Manufacturer Package CodeMSOP-8
Factory Lead Time6Weeks
YTEOL9
Additional FeatureTHE RESISTOR ARRAY VALUES ARE 5000 OHM,10000 OHM, 50000 OHM
Bandwidth-Nom2kHz
Control Interface2-WIRE SERIAL
Converter TypeDIGITAL POTENTIOMETER
JESD-30 CodeS-PDSO-G8
JESD-609 Codee3
Number of Functions1
Number of Positions257
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeSOP8,.19
Package ShapeSQUARE
Package StyleSMALL OUTLINE
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Resistance LawLINEAR
Resistance Tolerance-Max20%
Resistor Terminal Voltage-Max5.5V
Screening LevelTS 16949
Supply Current-Max0.6mA
Supply Voltage-Nom3V
Surface MountYES
TechnologyCMOS
Temperature Coefficient-Nom150ppm/°C
Temperature GradeAUTOMOTIVE
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)40
Total Resistance-Nom100000Ω
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginThailand

Datasheet

MCP4531-103E/MS Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

Compatible alternatives and drop-in replacements for MCP4531-103E/MS:

MCP4531-104E/MSMicrochip Technology Inc

Digital Potentiometer, 1 Func, 100000ohm, 2-wire Serial Control Interface, 257 Positions, CMOS, PDSO8

View Part →
MCP4531-503E/MSMicrochip Technology Inc

Digital Potentiometer, 1 Func, 100000ohm, 2-wire Serial Control Interface, 257 Positions, CMOS, PDSO8

View Part →
MCP4531-502E/MSMicrochip Technology Inc

Single, 7-bit, volatile linear pot w/I2C

View Part →

Frequently Asked Questions

How many resistance steps does MCP4531-103E/MS provide, and what is the step size for a 10 kΩ pot?

The MCP4531-103E/MS provides 128 wiper positions over a 10 kΩ end-to-end resistance, giving a step resolution of approximately 78 Ω per step. This fine granularity allows precise analog voltage or current adjustments in programmable gain amplifiers, bias circuits, and calibration loops controlled via the I2C interface.

What bandwidth does the MCP4531-103E/MS support, and is it suitable for audio signal paths?

The MCP4531-103E/MS has a nominal bandwidth of 2 kHz, which covers the audio frequency range up to 2000 Hz and supports voice-band signal processing applications. For higher bandwidth analog paths such as radio frequency or wideband instrumentation, a device with wider bandwidth would be needed, but 2 kHz is sufficient for most audio volume control and tone adjustment circuits.

Can MCP4531-103E/MS replace a mechanical trimmer potentiometer in a factory calibration workflow?

Yes, the MCP4531-103E/MS replaces mechanical trimmers by allowing a microcontroller to write calibration values over the I2C bus during automated test, then lock the 7-bit wiper position in firmware or in a companion non-volatile device. Compared to a manual 10 kΩ trimmer, this eliminates screwdriver adjustment steps, reduces calibration time, and enables in-field recalibration without opening the enclosure.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.6100
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$0.8000$0.80
25+$0.7000$17.50
100+$0.6400$64.00
1000+$0.6100$610.00
pcs
Unit price: $0.8000 · Total: $0.80

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea