MCP4531-104E/MS Microchip Integrated Circuit (Small Outline Packages) In Stock

MCP4531-104E/MS is a single-channel 128-step I2C digital potentiometer from Microchip with 100 kΩ end-to-end resistance and MSOP-8 package. Enables software-controlled resistance adjustment for gain, offset, and calibration circuits. Available from stock worldwide with competitive pricing.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MCP4531-104E/MSSmall Outline Packages
Quick Facts
Manufacturer
Microchip
Package
Small Outline Packages
Pin Count
8
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $0.6100(MOQ 1)
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • 128-step resolution for fine resistance control in 100 kΩ range
  • 2-wire I2C serial interface simplifies microcontroller integration
  • Non-volatile memory optional in family variants retains wiper position on power-off
  • Compact MSOP-8 package with 0.65 mm pitch suits space-constrained PCBs
  • 2 kHz bandwidth supports audio and low-frequency signal path adjustment
  • Also available in 5 kΩ and 10 kΩ and 50 kΩ resistance variants for design flexibility

Applications

The MCP4531-104E/MS is used in applications requiring digitally programmable resistance for gain trimming, bias adjustment, and offset calibration in op-amp circuits, LCD contrast control, and programmable filter cutoff tuning. Its I2C interface allows a microcontroller to adjust the 100 kΩ resistance across 128 discrete steps without manual intervention, making it valuable in automatic calibration routines for industrial sensors and consumer electronics. The MSOP-8 footprint and single-supply operation also fit portable instruments and IoT nodes where board space and power budget are tightly constrained.

Specifications

Manufacturer Package CodeMSOP-8
Factory Lead Time25Weeks
YTEOL9
Additional FeatureTHE RESISTOR ARRAY VALUES ARE 5000 OHM,10000 OHM, 50000 OHM
Bandwidth-Nom2kHz
Control Interface2-WIRE SERIAL
Converter TypeDIGITAL POTENTIOMETER
JESD-30 CodeS-PDSO-G8
JESD-609 Codee3
Number of Functions1
Number of Positions257
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeSOP8,.19
Package ShapeSQUARE
Package StyleSMALL OUTLINE
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Resistance LawLINEAR
Resistance Tolerance-Max20%
Resistor Terminal Voltage-Max5.5V
Screening LevelTS 16949
Supply Current-Max0.6mA
Supply Voltage-Nom3V
Surface MountYES
TechnologyCMOS
Temperature Coefficient-Nom150ppm/°C
Temperature GradeAUTOMOTIVE
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)40
Total Resistance-Nom100000Ω
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
HTS Code8542.39.00.60
Country of OriginThailand

Datasheet

MCP4531-104E/MS Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How many discrete resistance steps does MCP4531-104E/MS provide and what step size does this correspond to?

The MCP4531-104E/MS offers 128 wiper steps across a 100 kΩ end-to-end resistance, giving a nominal step size of approximately 781 Ω per increment. This resolution allows fine-grained control of analog circuit parameters such as amplifier gain, filter cutoff frequency, or reference voltage, without requiring physical trimmer potentiometers that can drift over time or require manual recalibration during production.

How does MCP4531-104E/MS interface with a microcontroller and what bus speed does it support?

The MCP4531-104E/MS uses a 2-wire I2C serial interface compatible with standard I2C bus speeds, including 100 kHz standard mode and 400 kHz fast mode, enabling straightforward integration with any microcontroller that has an I2C peripheral. The device also supports hardware address selection so that multiple MCP4531 units can share the same I2C bus, useful in systems needing independent control of several gain-setting or bias-adjustment potentiometers.

For an audio tone-control circuit, is MCP4531-104E/MS bandwidth sufficient and can it handle audio signal levels?

The MCP4531-104E/MS has a nominal -3 dB bandwidth of 2 kHz, which covers the critical audio range for bass and treble tone controls in consumer electronics. The 100 kΩ resistance and MSOP-8 package suit passive tone-control networks operating at typical audio signal levels of a few hundred millivolts peak, while the 128 steps allow perceptible incremental volume or tone adjustments under software control via the I2C interface.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.6100
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$0.8400$0.84
25+$0.7000$17.50
86+$0.6860$59.00
100+$0.6400$64.00
1000+$0.6100$610.00
pcs
Unit price: $0.8400 · Total: $0.84

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea