M24C16-DFCU6TP/K STMicroelectronics Integrated Circuit (BGA) In Stock

STMicroelectronics M24C16-DFCU6TP/K is a 16-Kbit (2 K × 8-bit) I2C serial EEPROM in a 4-ball CSP package with a 400 kHz fast-mode bus clock. It operates from 1.8 V to 5.5 V with 1 million write cycle endurance. Available from stock worldwide with competitive pricing and fast shipping.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
M24C16-DFCU6TP/KBGA
Quick Facts
Manufacturer
STMicroelectronics
Package
BGA
Pin Count
4
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $0.1607(MOQ 1)
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • 16 Kbit (2048 × 8-bit) EEPROM capacity with 400 kHz Fast-mode I2C interface, suitable for configuration data and calibration coefficient storage
  • Ultra-compact 4-ball CSP package measuring under 1 mm × 1 mm, enabling dense PCB layouts in wearable and IoT devices
  • Wide supply range of 1.8 V to 5.5 V with low active current below 1 mA and sub-1 µA standby current for battery-operated nodes
  • 1 million write cycle endurance and 40-year data retention ensure reliable non-volatile storage over product lifetime

Applications

The M24C16-DFCU6TP/K is designed for wearable electronics, IoT sensor nodes, and medical devices requiring non-volatile configuration memory in the smallest possible footprint, leveraging its sub-1 mm² CSP package. Its I2C interface at 400 kHz allows fast read/write access for storing calibration tables, device identifiers, and power-management settings in smart meters and wireless sensor tags. The 1.8 V minimum supply and ultra-low standby current make it ideal for energy-harvesting systems and coin-cell-powered applications.

Specifications

Factory Lead Time10Weeks
YTEOL6
Clock Frequency-Max (fCLK)0.4MHz
JESD-30 CodeR-PBGA-B4
Memory Density16384bit
Memory IC TypeEEPROM
Memory Width8
Number of Functions1
Number of Words2048words
Number of Words Code2000
Operating ModeSYNCHRONOUS
Organization2KX8
Package Body MaterialPLASTIC/EPOXY
Package ShapeRECTANGULAR
Package StyleGRID ARRAY, VERY THIN PROFILE, FINE PITCH
Parallel/SerialSERIAL
Peak Reflow Temperature (Cel)260
Serial Bus TypeI2C
Supply Voltage-Max (Vsup)5.5V
Supply Voltage-Min (Vsup)1.6V
Supply Voltage-Nom (Vsup)1.8V
Surface MountYES
TechnologyCMOS
Temperature GradeINDUSTRIAL
Terminal FormBALL
Terminal Pitch0.4mm
Terminal PositionBOTTOM
Time@Peak Reflow Temperature-Max (s)30
PackageBGA

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8542.32.00.51
Country of OriginSingapore

Datasheet

M24C16-DFCU6TP/K Datasheet Download

Official datasheet from STMicroelectronics

Alternate & Equivalent Parts

Compatible alternatives and drop-in replacements for M24C16-DFCU6TP/K:

Frequently Asked Questions

What is the storage capacity and organization of the M24C16-DFCU6TP/K?

The M24C16-DFCU6TP/K stores 16 Kbits organized as 2048 bytes (2 K × 8-bit), accessed over I2C with 8-byte page write buffers. This capacity accommodates firmware configuration tables, serial numbers, factory calibration data, and user parameters in a single compact device without consuming SPI bus resources.

How does the CSP package of M24C16-DFCU6TP/K benefit space-constrained designs?

The 4-ball Chip Scale Package (CSP) has an extremely small footprint of approximately 1.0 mm × 1.0 mm with a 0.5 mm ball pitch, consuming up to 80% less PCB area than an equivalent SOT-23-5 package. This makes it the preferred choice for wearable fitness trackers, hearing aids, and smart card modules where every square millimeter of board space is at a premium.

What write endurance and data retention does the M24C16-DFCU6TP/K guarantee?

ST specifies 1 million write cycles per byte and a minimum data retention of 40 years at 85°C for the M24C16-DFCU6TP/K. These figures comfortably cover industrial applications that update calibration registers daily over 10-year product lifetimes, and they exceed the 100,000-cycle minimum common in competing serial EEPROM families.

Can M24C16-DFCU6TP/K operate on the same I2C bus as other STMicroelectronics EEPROM devices?

Yes. The M24C16 uses a 7-bit I2C address where the upper 4 bits are fixed at 1010b and the lower 3 bits are set by the A0, A1, A2 address pins (or hardwired in CSP variants). Up to 8 devices can share one I2C bus at 400 kHz Fast-mode, allowing a system to scale EEPROM capacity from 16 Kbits to 128 Kbits by populating multiple M24C16 devices.

How should the M24C16-DFCU6TP/K supply voltage be decoupled on a 1.8 V IoT board?

ST recommends placing a 100 nF ceramic bypass capacitor within 2 mm of the VCC ball and a 10 µF bulk capacitor on the power plane to handle I2C write-burst current spikes of up to 1 mA. On a 1.8 V rail, using a low-ESR 0402 ceramic capacitor rated at ≥ 4 V ensures stable I2C communication during rapid page-write sequences.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About STMicroelectronics

STMicroelectronics is a global semiconductor leader serving customers across the spectrum of electronics applications. ST's products are found in a wide range of applications including automotive, industrial, personal electronics, and communications.

AvailabilityIn Stock
Reference Price (USD)
From $0.1607
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$0.1607$0.16
pcs
Unit price: $0.1607 · Total: $0.16

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea