HTSS-121-01-L-DV SAMTEC Connector (Other) In Stock
SAMTEC HTSS-121-01-L-DV is a 42-position high-temperature shrouded terminal strip with 0.100" (2.54 mm) pitch in a dual-row right-angle (L) cable-mate configuration. Rated for elevated temperature operation, it features a shrouded and vertical-lock design for secure and polarized cable connections in harsh thermal environments. Ideal for industrial automation, automotive electronics, and power electronics requiring reliable 42-pin interconnect with heat resistance.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 42
- Lifecycle
- ACTIVE
- Datasheet
- HTSS-121-01-L-DV Datasheet PDF
- Category
- Connector
- Price
- From $1.8100(MOQ 1000)
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of HTSS-121-01-L-DV?
- 42-position dual-row shrouded design at 0.100" (2.54 mm) pitch with right-angle (L) orientation for PCB-edge cable access in space-constrained assemblies
- High-temperature (HT) rated housing material withstands elevated ambient and soldering process temperatures beyond standard connector ratings
- Shrouded and polarized housing prevents cable mis-mating across all 42 positions, critical for complex multi-signal harnesses in industrial environments
- Vertical-lock (V) feature secures the mating cable connector against vibration-induced unmating in automotive and industrial motion-control installations
- Cable-mate termination style enables direct attachment of pre-assembled ribbon cable or wire harness assemblies without soldering
What is HTSS-121-01-L-DV used for?
The SAMTEC HTSS-121-01-L-DV is used in industrial motor drives, automotive ECU wiring harnesses, and power inverter control boards where a 42-position high-temperature cable connector is needed with secure locking and polarized keying. Its right-angle orientation suits panel-mounted PCBs in enclosed control units where cables must exit parallel to the board surface, and the 42-position count accommodates complex multi-signal buses combining PWM control, analog feedback, digital I/O, and power lines in a single connector. Harsh-environment applications such as EV battery management systems and factory automation controllers rely on the high-temperature housing and vertical-lock retention to maintain reliable connections under thermal cycling and mechanical vibration.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the HTSS-121-01-L-DV datasheet?
HTSS-121-01-L-DV Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for HTSS-121-01-L-DV?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What makes the HTSS-121-01-L-DV suitable for elevated-temperature industrial or automotive environments?
The HTSS-121-01-L-DV uses a high-temperature (HT) rated housing material that withstands sustained elevated ambient temperatures well above the 85°C limit of standard connectors, making it suitable for under-hood automotive wiring, motor drive control boards, and industrial ovens or furnace controllers where ambient temperatures regularly reach 105°C to 125°C. The 42-position shrouded body also resists warping at elevated temperatures, maintaining reliable contact alignment across all 42 pins even after repeated thermal cycling between -40°C and high operating temperatures.
How does the vertical-lock (V) feature of the HTSS-121-01-L-DV improve connector retention in vibrating equipment?
The vertical-lock (V) design adds a secondary retention mechanism between the HTSS-121-01-L-DV header and its mating cable connector, requiring a deliberate release action to unmate the connector rather than allowing it to pull free under axial load or vibration. In industrial motor drives, conveyor systems, and automotive powertrain modules where vibration levels can reach 10 G or more across a 10 Hz to 2000 Hz spectrum, this locking feature prevents the 42-position cable harness from intermittently disconnecting, which could cause control faults or equipment damage.
Which multi-signal harness configurations are commonly assembled using the 42-position HTSS-121-01-L-DV?
The 42-position HTSS-121-01-L-DV accommodates harnesses combining digital I/O lines, analog sensor inputs, PWM outputs, and low-voltage power rails within a single 2.54 mm pitch dual-row connector, reducing the number of separate connectors on a board from 4 or 5 down to 1. EV battery management system interfaces, multi-axis servo drive panels, and industrial robot control cards commonly use this 42-pin count to route all motor feedback, encoder, and command signals through a single keyed connector. The right-angle orientation allows cable routing along the board surface within a sealed enclosure without requiring panel cutouts for vertical cable exits.
How does the HTSS-121-01-L-DV compare to a standard TST-series shrouded header of the same pitch for harsh-environment designs?
The HTSS-121-01-L-DV belongs to SAMTEC's high-temperature shrouded terminal strip (HTSS) series, which uses housing materials and plating options rated for sustained temperatures up to approximately 105°C to 125°C, compared to the standard TST series which is typically rated to 85°C. The HTSS also includes the vertical-lock (V) retention feature and is designed specifically for cable-mate applications where the mating connector attaches a pre-wired harness, whereas TST-series headers are more commonly used with IDC ribbon cable terminations at standard operating temperatures. For automotive or high-ambient industrial designs, the HTSS-121-01-L-DV provides the additional thermal margin and mechanical retention that a standard 42-position 2.54 mm pitch header cannot reliably deliver.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1000+ | $3.2300 | $3230.00 |
| 2500+ | $2.5200 | $6300.00 |
| 5000+ | $1.8100 | $9050.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector