HTSS-113-01-TM-DV-P-TR SAMTEC Connector (Other) In Stock
SAMTEC HTSS-113-01-TM-DV-P-TR is a 26-position, 0.100 inch pitch high-temperature shrouded terminal strip designed for dual-row cable-to-board mating in demanding thermal environments. It provides polarized shroud and tape-and-reel packaging for automated PCB assembly. Ideal for industrial control panels, automotive electronics, and embedded systems requiring reliable 2.54 mm pitch wire-to-board connectivity.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 26
- Lifecycle
- ACTIVE
- Datasheet
- HTSS-113-01-TM-DV-P-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 26 positions on 0.100 inch (2.54 mm) pitch for high-density cable-to-board connections in compact assemblies
- High-temperature rated shroud material for reliable operation in elevated ambient environments above 85°C
- Dual-row configuration with polarized shroud preventing mis-mating of cable connectors during field assembly
- Tape-and-reel packaging enabling high-speed automated SMT or THT pick-and-place manufacturing
- Cable-mate design compatible with SAMTEC HTSLW and HTSD female cable housing series
Applications
The HTSS-113-01-TM-DV-P-TR is used in industrial control systems, embedded computing boards, and automotive electronics assemblies where a reliable 26-position dual-row wire-to-board interface must survive elevated ambient temperatures exceeding 85°C. Its shrouded and polarized design prevents incorrect cable insertion in field-serviced equipment such as motor drive panels, robotics controllers, and HVAC control modules. The tape-and-reel format supports high-volume PCB manufacturing lines using automated pick-and-place equipment at 0.100 inch pitch.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the contact pitch of the HTSS-113-01-TM-DV-P-TR and how does it affect connector density on a PCB?
The HTSS-113-01-TM-DV-P-TR uses a 0.100 inch (2.54 mm) contact pitch with 26 positions arranged in a dual-row layout, providing 13 positions per row. This standard pitch allows the connector to mate with the widest range of off-the-shelf cable assemblies and IDC ribbon connectors, while the dual-row format keeps the board footprint compact, occupying approximately 33 mm in length for the 13-position row, which is advantageous in space-constrained control PCBs.
What temperature range is the HTSS-113-01-TM-DV-P-TR rated for, and in which environments does the high-temp shroud provide a design advantage?
The HTSS-113-01-TM-DV-P-TR is built with a high-temperature rated insulator housing that supports operating temperatures well above the standard 85°C limit of conventional nylon connectors, typically rated to 125°C or higher. This high-temp material selection is critical in automotive under-hood control modules, industrial motor drives, and power electronics enclosures where convective heat from nearby components can elevate local ambient temperatures beyond what standard connectors can sustain reliably over a 10-year service life.
How does the polarized shroud on the HTSS-113-01-TM-DV-P-TR prevent mis-mating in field-serviced equipment?
The HTSS-113-01-TM-DV-P-TR features a shroud with an asymmetric key slot that accepts only the correct orientation of the mating cable housing, making it physically impossible to insert the connector 180 degrees reversed. This polarization eliminates the risk of applying reversed 24 V or 48 V power rail wiring to signal lines during field maintenance, which would otherwise damage connected ICs or cause uncontrolled actuator behavior in safety-critical industrial systems with multiple 26-pin cable harnesses in close proximity.
What current and voltage ratings does a 0.100 inch pitch terminal strip like the HTSS-113-01-TM-DV-P-TR support for mixed signal and power wiring?
Connectors in the SAMTEC HTSS series at 0.100 inch pitch typically support a contact current rating of 1 A to 3 A per pin at room temperature and a dielectric withstanding voltage of at least 500 V AC between adjacent contacts. For a 26-position dual-row configuration this allows designers to route both 24 V logic signals and low-current 48 V auxiliary power through the same connector body, provided total bundle current does not cause connector body heating above the high-temperature insulator rating.
Related Guides
How to Choose a Digital Potentiometer: AD5204, AD5206, and AD8403 Selection Guide
Compare the AD5204, AD5206, and AD8403 multi-channel SPI digipots by channel count, resistance value, and package to choose the right Analog Devices digital potentiometer for your design.
Jun 21, 2026
AD7745 / AD7746 / AD7747 Capacitance-to-Digital Converter Design Guide
Complete application note for the AD774x CDC family: circuit design, shielding, conversion rate selection, and sourcing guidance for the AD7745, AD7746, and AD7747.
Jun 21, 2026
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”