DSPIC30F6014A-30I/PF Microchip Integrated Circuit (Quad Flat Packages) In Stock
Microchip DSPIC30F6014A-30I/PF is a 16-bit digital signal controller combining DSP and MCU functions in an 80-pin TQFP package. It runs up to 30 MIPS at 40 MHz clock with fixed-point DSP arithmetic and a hardware barrel shifter, making it ideal for motor control, power conversion, and sensor processing. Available worldwide for industrial and embedded control applications requiring real-time DSP performance.
- Manufacturer
- Microchip
- Package
- Quad Flat Packages
- Pin Count
- 80
- Lifecycle
- ACTIVE
- Datasheet
- DSPIC30F6014A-30I/PF Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 16-bit DSP core with hardware barrel shifter delivers up to 30 MIPS at 40 MHz for real-time control
- Fixed-point DSP arithmetic engine accelerates motor FOC, filter, and control loop calculations
- 80-pin TQFP package provides extensive I/O for multi-axis motor and sensor interfacing
- Operates from 2.5 V minimum supply at 10 MHz enabling low-power and battery-operated designs
- Rich peripheral set including multiple UARTs, SPI, I2C, and ADC for embedded system connectivity
Applications
The DSPIC30F6014A-30I/PF is designed for real-time motor control, power factor correction, and digital power supply applications requiring combined DSP and MCU capabilities at 16-bit resolution. It is widely used in variable frequency drives, servo controllers, and inverter designs where its 40 MHz clock and hardware multiply-accumulate unit handle closed-loop control algorithms with sub-microsecond interrupt latency. The 80-pin TQFP package supports up to 68 I/O pins, enabling complex multi-channel sensor interfacing in industrial automation equipment.
Specifications
| Pbfree Code | Yes |
| Manufacturer Package Code | TQFP-80 |
| Factory Lead Time | 10Weeks |
| YTEOL | 9 |
| Additional Feature | ALSO OPERATES AT 2.5V MINIMUM SUPPLY AT 10 MHZ |
| Barrel Shifter | YES |
| Bit Size | 16 |
| Boundary Scan | NO |
| Clock Frequency-Max | 40MHz |
| Format | FIXED POINT |
| Internal Bus Architecture | MULTIPLE |
| JESD-30 Code | S-PQFP-G80 |
| JESD-609 Code | e3 |
| Low Power Mode | YES |
| On Chip Program ROM Width | 24 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TQFP80,.63SQ |
| Package Shape | SQUARE |
| Package Style | FLATPACK, THIN PROFILE |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| ROM Programmability | FLASH |
| Screening Level | TS 16949 |
| Supply Current-Max | 250mA |
| Supply Voltage-Max | 5.5V |
| Supply Voltage-Min | 3V |
| Supply Voltage-Nom | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Terminal Position | QUAD |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, CONTROLLER |
| Package | Quad Flat Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 3 |
| ECCN | 3A991.A.2 |
| HTS Code | 8542.31.00.01 |
| Country of Origin | Philippines |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for DSPIC30F6014A-30I/PF:
Frequently Asked Questions
What processing speed and DSP capabilities does the DSPIC30F6014A-30I/PF offer for motor control?
The DSPIC30F6014A-30I/PF runs at up to 30 MIPS from a 40 MHz instruction clock, with a hardware fixed-point DSP multiply-accumulate unit and barrel shifter. These features allow it to execute field-oriented control (FOC) algorithms for 3-phase motors in real time, maintaining current loop update rates of 20 kHz or higher needed for precise torque and speed regulation.
What supply voltage range allows the DSPIC30F6014A-30I/PF to work in low-power embedded designs?
The DSPIC30F6014A-30I/PF operates down to a 2.5 V minimum supply voltage at reduced clock speeds of up to 10 MHz, and at the full 40 MHz with a 3.3 V supply. This dual operating range allows designers to deploy it in battery-powered sensors and low-power nodes at 2.5 V while using the same silicon at 3.3 V or 5 V in mains-powered industrial control boards.
How does DSPIC30F6014A-30I/PF compare to a standard PIC18 MCU for inverter designs?
Unlike a standard PIC18 8-bit MCU, the DSPIC30F6014A-30I/PF has a 16-bit DSP core with a hardware multiplier that completes a 16 × 16 bit multiply in a single clock cycle at 40 MHz, delivering 30 MIPS throughput. This is approximately 3 to 5 times the raw math performance of a PIC18 at equivalent clock speed, which is critical for implementing PWM modulation algorithms in inverter designs with update rates above 10 kHz.
What I/O and peripheral count does the DSPIC30F6014A-30I/PF provide in its 80-pin TQFP package?
In the 80-pin TQFP package, the DSPIC30F6014A-30I/PF offers up to 68 general-purpose I/O pins alongside dedicated peripherals including multiple UART, SPI, and I2C communication ports, 12-bit ADC channels, PWM outputs, and input capture/output compare modules. This rich peripheral set supports multi-axis motor control or multi-channel data acquisition without requiring external interface chips.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
PIC16LF88-I/SS
Small Outline Packages
Integrated Circuit
25AA02E48-I/SN
Small Outline Packages
Integrated Circuit
PIC18F1220-I/SO
Small Outline Packages
Integrated Circuit
MIC5319-1.8YD5-TR
SOT23 (5-Pin)
Integrated Circuit
dsPIC33FJ256GP710A-I/PT
Quad Flat Packages
Integrated Circuit
BM70BLES1FC2-0B03AA
Other
Integrated Circuit
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”