DM1AA-SF-PEJAlternatives & Equivalent Parts
About DM1AA-SF-PEJ
DM1AA-SF-PEJ is an electronic component manufactured by Hirose. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 3 alternatives for DM1AA-SF-PEJ — response within 24 hours.
Specification Comparison
| Parameter | DM1AA-SF-PEJSource | MCP48FVB02-E/UN | DTC114EETL | BH3547F-E2 |
|---|---|---|---|---|
| Manufacturer | Hirose | Microchip | ROHM Semiconductor | ROHM Semiconductor |
| Package Type | — | Small Outline Packages | Other | Small Outline Packages |
| Pin Count | — | 10 | 3 | 8 |
| Temperature Range | -25.0°C ~ 90.0°C | -40.0°C ~ 125.0°C | ~ 150.0°C | -25.0°C ~ 75.0°C |
| Price | $2.0100 | $0.5790 | $0.0277 | $0.1263 |
| Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | OBSOLETE | ACTIVE | ACTIVE | NOT RECOMMENDED |
| Electrical Parameters | ||||
| Pbfree Code | Yes | Yes | Yes | Yes |
| YTEOL | 0 | 14 | 7 | 5 |
| Board Mounting Option | PEG | — | — | — |
| Body Breadth | 0.114 inch | — | — | — |
| Body Depth | 1.201 inch | — | — | — |
| Body Length | 1.181 inch | — | — | — |
| Body/Shell Style | RECEPTACLE | — | — | — |
| Connector Type | PCB CONNECTOR | — | — | — |
| Contact Finish Mating | NOT SPECIFIED | — | — | — |
| Contact Finish Termination | Tin (Sn) | — | — | — |
| Contact Gender | FEMALE | — | — | — |
| Contact Material | COPPER ALLOY | — | — | — |
| Contact Pattern | STAGGERED | — | — | — |
| Contact Resistance | 100 mΩ | — | — | — |
| Contact Style | COMPRESSION | — | — | — |
| DIN Conformance | NO | — | — | — |
| Filter Feature | NO | — | — | — |
| IEC Conformance | NO | — | — | — |
| Insulation Resistance | 1000000000 Ω | — | — | — |
| Insulator Color | BLACK | — | — | — |
| Insulator Material | POLYETHYLENE | — | — | — |
| JESD-609 Code | e3 | e3 | e1 | — |
| MIL Conformance | NO | — | — | — |
| Mating Contact Pitch | 0.098 inch | — | — | — |
| Mixed Contacts | NO | — | — | — |
| Mounting Option 1 | LOCKING | — | — | — |
| Mounting Style | RIGHT ANGLE | — | — | — |
| Mounting Type | BOARD | — | — | — |
| Number Of Connectors | ONE | — | — | — |
| Number Of PCB Rows | 1 | — | — | — |
| Number of Ports | 1 | — | — | — |
| Number of Rows Loaded | 1 | — | — | — |
| Option | GENERAL PURPOSE | — | — | — |
| PCB Contact Pattern | RECTANGULAR | — | — | — |
| Rated Current (Signal) | 0.5 A | — | — | — |
| Reference Standard | UL | — | — | — |
| Terminal Pitch | 2.4892 mm | 0.5 mm | — | 1.27 mm |
| Termination Type | SURFACE MOUNT | — | — | — |
| Total Number of Contacts | 9 | — | — | — |
| Manufacturer Package Code | — | MSOP-10 | — | — |
| Factory Lead Time | — | 7 Weeks | 18 Weeks | 11 Weeks |
| Converter Type | — | D/A CONVERTER | — | — |
| Input Bit Code | — | BINARY | — | — |
| Input Format | — | SERIAL | — | — |
| JESD-30 Code | — | S-PDSO-G10 | R-PDSO-G3 | R-PDSO-G8 |
| Linearity Error-Max (EL) | — | 0.1953% | — | — |
| Number of Bits | — | 8 | — | — |
| Number of Functions | — | 1 | — | 1 |
| Package Body Material | — | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY |
| Package Equivalence Code | — | TSSOP10,.19,20 | — | SOP8,.25 |
| Package Shape | — | SQUARE | RECTANGULAR | RECTANGULAR |
| Package Style | — | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | SMALL OUTLINE | SMALL OUTLINE, LOW PROFILE |
| Peak Reflow Temperature (Cel) | — | 260 | 260 | — |
| Screening Level | — | TS 16949 | — | — |
| Settling Time-Nom (tstl) | — | 7.8 µs | — | — |
| Supply Current-Max | — | 1.75 mA | — | — |
| Surface Mount | — | YES | YES | YES |
| Temperature Grade | — | AUTOMOTIVE | — | COMMERCIAL EXTENDED |
| Terminal Finish | — | Matte Tin (Sn) | Tin/Silver/Copper (Sn/Ag/Cu) | — |
| Terminal Form | — | GULL WING | GULL WING | GULL WING |
| Terminal Position | — | DUAL | DUAL | DUAL |
| ## MCP48FVB02-E/UN Alternates Showing results | — | Image | — | — |
| Additional Feature | — | — | BUILT IN BIAS RESISTOR RATIO IS 1 | — |
| Collector Current-Max (IC) | — | — | 0.1 A | — |
| Collector-Emitter Voltage-Max | — | — | 50 V | — |
| Configuration | — | — | SINGLE WITH BUILT-IN RESISTOR | — |
| DC Current Gain-Min (hFE) | — | — | 30 | — |
| Number of Elements | — | — | 1 | — |
| Polarity/Channel Type | — | — | NPN | — |
| Power Dissipation Ambient-Max | — | — | 0.15 W | — |
| Power Dissipation-Max (Abs) | — | — | 0.15 W | — |
| Qualification Status | — | — | Not Qualified | Not Qualified |
| Time@Peak Reflow Temperature-Max (s) | — | — | 30 | — |
| Transistor Application | — | — | SWITCHING | — |
| Transistor Element Material | — | — | SILICON | — |
| Transition Frequency-Nom (fT) | — | — | 250 MHz | — |
| VCEsat-Max | — | — | 0.3 V | — |
| Bandwidth-Nom | — | — | — | 20 kHz |
| Consumer IC Type | — | — | — | CLASS AB AUDIO AMPLIFIER |
| Harmonic Distortion | — | — | — | 0.05% |
| Number of Channels | — | — | — | 2 |
| Output Power-Nom | — | — | — | 0.077 W |
| Supply Voltage-Max (Vsup) | — | — | — | 5.5 V |
| Supply Voltage-Min (Vsup) | — | — | — | 4.5 V |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 3 alternatives for DM1AA-SF-PEJ — response within 24 hours.
Quick Links
Why Look for Alternatives?
Finding alternatives for DM1AA-SF-PEJ is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating DM1AA-SF-PEJ replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for DM1AA-SF-PEJ. Get expert recommendations within 24 hours.
FAQ
What is equivalent to DM1AA-SF-PEJ?
Known equivalents for DM1AA-SF-PEJ include MCP48FVB02-E/UN, DTC114EETL, BH3547F-E2. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of DM1AA-SF-PEJ?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify DM1AA-SF-PEJ alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.