Undefined or Miscellaneous

Use the download button to access the CSD88599Q5DCT schematic symbol, PCB footprint, and 3D model.

Enhanced Product Single 2-Input Exclusive-Or Gate

4-A + 2.5-A + Two 1.5-A Buck Converters with Integrated Switches for nanoRadar

20-V Fully Integrated Sync Boost with Load Disconnect

20-V Fully Integrated Sync Boost with Load Disconnect

3-A High Efficiency Synchronous Step-Down Converter

Automotive Dual-Channel High-Speed ESD Protection Device

Use the download button to access the TPS561208DDCR schematic symbol, PCB footprint, and 3D model.

25- to 100-MHz, 10-bit & 12-bit FPD-Link III serializer

LMH6642QMFX/NOPB is a dual low-power 130 MHz voltage-feedback operational amplifier with rail-to-rail output swing and 75 mA output current capability. It features 74 dB minimum CMRR and 46 MHz bandwidth, housed in a compact SOT-23 5-pin package, suited for portable signal processing and video buffer applications.

TPS568215RNNR is a voltage-mode PWM synchronous buck converter from Texas Instruments. It supports 4.5V–17V input, 0.6V–5.5V adjustable output, and up to 8A output current. From $0.41, in stock with worldwide shipping.

Texas Instruments 74ACT11008PW is a quadruple 2-input positive-AND gate in TSSOP-16 package, featuring ACT logic family with 50pF load capacitance and 24mA output current. From $1.19 in stock with worldwide shipping.

0.05% 20ppm/°C Drift Precision Series Voltage Reference with Shutdown Enable”

Operational Amplifiers - Op Amps 500 nA Nanopower Operational Amplifier for Cost-Optimized Systems 5-SOT-23 -40 to 125

Transimpedance Amplifiers High Speed Precision Transimpedance

Use the download button to access the TPS61230ARNSR schematic symbol, PCB footprint, and 3D model.

3.3-V Automotive CAN Bus Transceivers

±2°C accurate, 2.7V to 5.5V industry-standard digital temperature sensor with I2C/SMBus interface and 9-bit resolution. Features programmable OS output, 3 address pins for multi-device support, and low 1mA supply current. From $0.46, in stock worldwide shipping.

Low-Power Single Bus Buffer Gate with 3-State Output

Optical Sensor Ambient 505nm I2C/SMBus 6-UDFN Exposed Pad

Use the download button to access the DCP022405U schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TPS82130SILR schematic symbol, PCB footprint, and 3D model.

Texas Instruments TLV71333PDBVT, LDO Voltage Regulator, 150mA, 1 → 3.3 V ±1%, 5-Pin SOT-23

Texas Instruments SN74AHC1G08DBVR, 2-Input AND Logic Gate, 2 → 5.5 V, 5-Pin SOT-23

Texas Instruments LM2990T-12/NOPB, LDO Voltage Regulator, 1A, -12 V ±5%, -26 → 0.3 Vin, 3-Pin TO-220

Texas Instruments DRV5033AJQDBZT, Omnipolar Hall Effect Sensor 3-Pin SOT-23, 2.5 → 38 V

Use the download button to access the LMR23610ADDAR schematic symbol, PCB footprint, and 3D model.

Texas Instruments UCC29002D/1, Load Share Controller, 8-Pin, SOIC

Texas Instruments UCC27519DBVT, MOSFET Power Driver, 4A, 4.5 → 18 V, Non-Inverting, 5-Pin SOT-23

Texas Instruments TPS3828-33DBVR is a single-channel processor supervisor and voltage monitor IC with watchdog timer, adjustable reset threshold, and active-low reset output. Features 0 to 5.8V operating range in a compact 5-pin SOT-23 package. From $0.284 with worldwide shipping.

Texas Instruments SN74LVC86ADR, XOR Quad 2 Input XOR, 1.65 → 3.6 V, 14-Pin SOIC

Texas Instruments SN74HCT04PW, CMOS Hex Inverter 4mA, 4.5 → 5.5 V, 14-Pin TSSOP

Texas Instruments REG1117A, LDO Voltage Regulator, Adjustable 1A, 1.25 → 13.5 V ±1%, 4-Pin SOT-223

Texas Instruments OPA704NA/250 Op Amp, 3MHz CMOS, Rail to Rail, 5 V, 9 V, 5-Pin SOT-23

Use the download button to access the OPA2652U schematic symbol, PCB footprint, and 3D model.

The LPV521MGE/NOPB is a micropower rail-to-rail operational amplifier from Texas Instruments with 6.2kHz gain-bandwidth product and 1.6V to 5.5V supply range. It features 1pA typical bias current, 102dB common-mode rejection ratio, and 1mV maximum input offset voltage in a 5-pin SC-70 package. Available from stock worldwide with competitive pricing for ultra-low-power sensor applications.

Texas Instruments, LMZ22005TZ/NOPB DC-DC Converter 5A Adjustable, 0.8 → 6 V, 7-Pin TO-PMOD

Use the download button to access the LMZ20501SILT schematic symbol, PCB footprint, and 3D model.

Texas Instruments LMV641MG/NOPB Op Amp, 10MHz Rail-Rail, 2.7 → 12 V, 5-Pin SC-70

Texas Instruments LM4041D12IDBZR, Shunt Voltage Reference 1.225V, 1%, 3-Pin SOT-23

The LM3490IM5-3.3/NOPB is a fixed 3.3V LDO linear voltage regulator from Texas Instruments. It delivers up to 100mA output current with a typical dropout voltage of 0.9V and supports input voltages from 4.8V to 30V. Ideal for low-power embedded systems, IoT devices, and portable electronics requiring a stable 3.3V rail.

Texas Instruments DCP021515P, DC-DC Converter, 133mA, 7-Pin PDIP

Texas Instruments CD74HCT154M, Decoder, Demultiplexer, 1-of-16, Inverting, 4.5 → 5.5 V, 24-Pin SOIC

1% Accuracy Adjustable Precision Shunt Regulator

Use the download button to access the UA78M33CDCYR schematic symbol, PCB footprint, and 3D model.

Miniature, 2W Isolated Unregulated DC/DC Converters

High-Voltage, Rail-to-Rail Input/Output, 5µV, 0.2µV/˚C, Precision Operational Amplifier

High-Voltage, Rail-to-Rail Input/Output, 5µV, 0.2µV/˚C, Precision Operational Amplifier

Low-Drift, Low-Power, Dual-Output VREF and VREF/2 Voltage Reference

TPS562200DDCR is a 17V input, 2A synchronous step-down (buck) voltage regulator in a compact SOT-23-6 package. Features voltage-mode PWM control, Advanced Eco-mode for light-load efficiency, and 0.76V to 7V adjustable output. From $0.21 in stock worldwide shipping.