Undefined or Miscellaneous

The MRF24J40MA-I/RM is a 2.4 GHz IEEE 802.15.4 ZigBee RF transceiver module from Microchip, covering 2.405–2.480 GHz with O-QPSK modulation and a 2.4–3.6V supply. It integrates the RF transceiver, balun, and antenna into a compact 12-pin module for rapid wireless sensor network development.

Use the download button to access the LBP01-0810B schematic symbol, PCB footprint, and 3D model.

The TMAG5231A1CQDMRR is a low-power Hall-effect omnipolar magnetic switch operating from 1.65 V to 5.5 V. It detects magnetic fields up to 2.7 mT with 0.6 mT hysteresis and fits in an ultra-compact 1.4 mm x 1.1 mm package. Available on tape-and-reel from stock with worldwide shipping.

Board Mount Temperature Sensors 1.5V-Capable, 10 uA Analog Output Temperature Sensor in SC70 and TO-92 3-TO-92 -50 to 150

Hall Effect Sensor Single Axis TO-92-3, 2.7V ~ 38V, -40°C ~ 150°

TLV3603DCKR is a 2.5 ns ultra-fast rail-to-rail comparator from Texas Instruments in a 6-pin SOT-23 package. It features push-pull output, adjustable hysteresis, and a latch function with 5 µA bias current and 5 mV offset voltage. Available from stock worldwide with competitive pricing.

Switching Voltage Regulators SIMPLE SWITCHER power converter 4.5-V to 36-V, 1-A, synchronous buck with 40-uA IQ

Use the download button to access the TPS631000DRLR schematic symbol, PCB footprint, and 3D model.

Temperature Sensor Analog, Local -50°F ~ 300°F 10mV/°F TO-46-3

Use the download button to access the ISO1640DWR schematic symbol, PCB footprint, and 3D model.

Temperature Sensor Analog, Local -55°C ~ 150°C 10mV/°C TO-46-3

The TPS78430QWDRBRQ1 is an automotive-grade 300mA fixed-output LDO voltage regulator with ultra-low 0.115V dropout voltage and high PSRR in an 8-pin SON package. It operates from 3.5V to 6V input and meets AEC-Q100 automotive qualification for vehicle electronics. Available from Texas Instruments with worldwide distribution.

ROHS COMPLIANT, TO-220, 3 PIN

STMicroelectronics L4960H is a voltage-mode PWM buck switching regulator controller with adjustable output from 5.1V to 40V, supporting input voltages from 9V to 46V at 150kHz switching frequency. Delivers robust step-down regulation in a 7-pin HEPTAWATT package for industrial power conversion. Available from authorized distributors with worldwide shipping.

Board Mount Hall Effect / Magnetic Sensors Ratiometric linear hall effect sensor with analog output 3-TO-92 -40 to 125

Voltage References Automotive 12-ppm/ C low-noise low-power precision voltage reference

LDO Voltage Regulators 200-mA, nanopower-IQ (25 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125

TEXAS INSTRUMENTS - SN74LVC1G04DCKT - Inverter, 74LVC1G04, 1 Input, 32 mA, 1.65 V to 5.5 V, SC-70-5

AEC-Q100, 80V, low-/high-side, bi-dir, CSA w/PWM rejection & precision integrated shunt resistor

Reinforced Isolation Dual-Channel Gate Driver With 3.3mm Channel-to-Channel Spacing Option

Switching Voltage Regulators 100-V synchronous buck DC/DC controller with wide duty cycle range 20-VQFN -40 to 150

2-ch, 4:1 general purpose analog multiplexer with 1.8-V logic control

Use the download button to access the ISO1042BQDWVRQ1 schematic symbol, PCB footprint, and 3D model.

Analog Comparators Quad Nanopower Push-Pull Comparator

Use the download button to access the TMP235A2DBZT schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TMP236A2DBZR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the HDC2080DMBT schematic symbol, PCB footprint, and 3D model.

6-Pin High Performance CRM/DCM PFC Controller

Quad Channel, 26V, Low-/High-Side Voltage Output Current Sense Amplifier

Use the download button to access the TCAN330GDR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the LMR23625CFPDRRT schematic symbol, PCB footprint, and 3D model.

TL7700CPE4 is an adjustable-threshold voltage supervisor and power-on reset generator in an 8-pin PDIP package. It monitors supply voltages from 1V to 18V and holds the reset signal asserted for a programmable delay after supply recovery.

Use the download button to access the TPS61322DBZR schematic symbol, PCB footprint, and 3D model.

TLV70233QDBVRQ1 is an automotive-grade 300 mA fixed 3.3 V low-dropout LDO voltage regulator with an ultra-low quiescent current of 35 µA. It features a dropout voltage of 0.22 V nominal and supports an input range of 3.8 V to 5.5 V. Designed for AEC-Q100 portable automotive applications requiring efficient power management.

TO-220, 3 PIN

Dual High-Current Buck Converters and Dual Linear Regulators for TDA3x Processors

Use the download button to access the REF3318AIDCKR schematic symbol, PCB footprint, and 3D model.

XTPS560430XFDBVR is a synchronous step-down DC-DC converter from Texas Instruments accepting 4 V to 36 V input and delivering up to 600 mA output with current-mode PWM control. It integrates the switching MOSFET in a compact SOT-23-6 package for high-efficiency point-of-load regulation. Available from stock with worldwide shipping.

Octal Buffers and Line Drivers with 3-State Outputs

AEC-Q100, 26V, Bi-Directional, Zero-Drift, Low-/High-Side, Voltage Output Current Sense Amplifier

Board Mount Hall Effect / Magnetic Sensors Ultra-Low Power 1.65V to 5.5V

Ultra-Low Power 1.65V to 5.5V Hall Effect Switch Sensor

Use the download button to access the ESD401DPYR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TPS82140SILR schematic symbol, PCB footprint, and 3D model.

TEXAS INSTRUMENTS - DRV8838DSGR - MOTOR DRIVER, DC BRUSH, 1.8A, WSON-8

Use the download button to access the LMS36555QRNLTQ1 schematic symbol and PCB footprint.

Current Sense Amplifiers 26V, Bidirectional, Low- or High-Side Voltage Output Current Sense Amplifier 6-SOT-23 -40 to 125

Current Sense Amplifiers 26V, Bidirectional, Low- or High-Side Voltage Output Current Sense Amplifier 6-SOT-23 -40 to 125

Inverters Hex Schmitt-Trigger Inverters

20-V Fully Integrated Sync Boost with Load Disconnect