Transistor

TRIAC BTB06-600CWRG, 600V, Gate Trigger 1.3V 35mA, TO-220AB 3-Pin

TRIAC BTB10-600BWRG, 600V, Gate Trigger 1.3V 50mA, TO-220AB 3-Pin

TRIAC BTB16-600CWRG, 600V, Gate Trigger 1.3V 35mA, TO-220AB 3-Pin

BTB06-600BWRG is a 4-quadrant logic-level TRIAC from STMicroelectronics in TO-220AB 3-pin package. Key specs include 600V blocking voltage, 1.3V gate trigger voltage, 50mA gate trigger current, enabling direct microcontroller drive. Available from stock with worldwide shipping.

TRIAC BTA12-600SWRG, 800V, Gate Trigger 1.3V 10mA, TO-220AB 3-Pin

TRIAC BTA16-800CWRG, 800V, Gate Trigger 1.3V 35mA, TO-220AB Insulated 3-Pin

TRIAC BTA06-600CRG, 800V, Gate Trigger 1.3V 25mA, TO-220AB 3-Pin

The TMAG5111A2AQDBVT is a 2-dimensional, dual-channel Hall-effect latch sensor from Texas Instruments providing simultaneous speed and direction outputs with a ±2.6 mT magnetic field range and 2.75 mT hysteresis. Housed in a compact 5-pin SOT-23 package measuring 2.9 mm × 1.6 mm, it operates from -40°C to 125°C, making it ideal for rotary position detection, motor commutation, and proximity sensing in space-constrained industrial and consumer applications.

LDO Voltage Regulators 1.5A Low Dropout LDO

TEXAS INSTRUMENTS - LM60CIZ/NOPB - Temperature Sensor IC, Voltage, ± 3°C, -40 °C, +125 °C, TO-92, 3 Pins

V-Ref Precision 2.048V 15mA 3-Pin SOT-23 T/R

Board Mount Hall Effect/Magnetic Sensors Ratiometric linear hall effect sensor with analog output 3-SOT-23 -40 to 125

Board Mount Hall Effect/Magnetic Sensors Two-wire (current output), high-voltage (up to 38V), high-precision switch 3-SOT-23 -40 to 125

The SM73302MFX/NOPB is an 88 MHz precision CMOS operational amplifier from Texas Instruments with ultra-low input bias current, 1.8V supply operation, 100 dB typical CMRR, rail-to-rail input/output, and 5-pin SOT-23 package. In stock with worldwide shipping.

Voltage References Rail Splitter Transistor

Texas Instruments LM2593HVT-5.0/NOPB, 1-Channel, Step Down DC-DC Converter 7-Pin, TO-220

PLASTIC, TO-220, 11 PIN

Use the download button to access the LMD18200T/LF14 schematic symbol, PCB footprint, and 3D model.

Board Mount Hall Effect/Magnetic Sensors Ratiometric linear hall effect sensor with analog output 3-SOT-23 -40 to 125

Voltage References

LDO Voltage Regulators 200-mA, nanopower-IQ (25 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125

PLASTIC, TO-220, 3 PIN

PTLV9101IDBVR from Texas Instruments is a amplifier for measurement front ends, current sensing, instrumentation, and analog signal chains. Key specifications include 1MHz, 0A, 5 pins, -40°C to 125°C, SOT-23 package/footprint, supporting reliable selection for OEM maintenance, prototyping, and production BOMs. The SOT-23 format supports standard assembly and sourcing workflows.

IC, Regulator, Fast Response, Low Dropout, LMS1585ACT-ADJ

Linear Voltage Regulators 3P 1.5A Fixed 8V Pos Vltg Reg

TPS75715KCG3 is a 3A fixed-output LDO voltage regulator from Texas Instruments with a 1.5V output and ±3% accuracy. It features an ultra-low 0.3V typical dropout voltage and operates from a 2.8V to 5.5V input in a 5-Pin TO-220 package. Available from stock worldwide with fast shipping.

Ultra-small, dual-channel, 0.5-µA, resistor-programmable hot and cold temperature switch

LDO Voltage Regulators NRND, alternate is LP2980AIM5X-3.0/NO

Conv DC-DC 2.5V to 6V Synchronous Step Down Single-Out 0.7V to 6V 0.4A 5-Pin TSOT-23 T/R

Adjustable precision shunt regulator

Use the download button to access the SN74LVC1G0832DBVT schematic symbol, PCB footprint, and 3D model.

Standard Regulator Neg -8V 1.5A 3-Pin(3+Tab) TO-220 Tube

Voltage References 20ppm/DegC 100uA SOT23-3 Series

Display Drivers & Controllers

LM4040AIM3-4.1+ is a precision shunt voltage reference providing a stable 4.1 V output with tight tolerance. Housed in a compact SOT-23 3-pin package for space-constrained designs. Available worldwide for analog signal conditioning and ADC reference applications.

1-Channel, 1MHz, RRIO, 1.8V to 5.5V Operational Amplifier for Cost-Optimized Systems

Voltage References Precision Micropower Shunt Vltg Ref

IC,regulator,voltage,fixed,8.0V,TO220,LM2930T-8.0

LDO Regulator Neg -5.2V 1.8A 3-Pin(3+Tab) TO-220 Tube

Adjustable precision shunt regulator

LM2930T-5.0 NOPB is a Texas Instruments power management IC for regulated supplies and battery-powered products. It combines 3 pins, Transistor Outline, Vertical for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.

16-V, 50-mA, Low Iq, Low-Dropout Linear Regulator

Operational Amplifiers - Op Amps 550-uA/Ch 3-MHz Rail-to-Rail Out

Operational Amplifiers - Op Amps 1.8V 2.9uA 90kHz Rail-to-Rail I/O Op

The UCC283T-ADJG3 is an adjustable positive LDO linear voltage regulator from Texas Instruments, providing 1.22V to 8.5V output at up to 3A with low 0.4V typical dropout voltage. Available in 5-pin TO-220 package with RoHS-compliant e3 finish for reliable industrial and consumer power regulation. In stock with worldwide shipping.

Use the download button to access the SN74AHC1G126DBVT schematic symbol, PCB footprint, and 3D model.

The THS4281DBVTG4 is a very low-power rail-to-rail input/output voltage feedback operational amplifier from Texas Instruments with 40MHz bandwidth. It features 107dB common-mode rejection ratio, 85dB minimum CMRR, and max bias current of 1µA in a compact SOT-23 5-pin package. Available from stock worldwide with competitive pricing.

Step-down DC-DC switching regulator from Texas Instruments delivering a fixed 15V output at up to 3A from a 4V to 60V input range. Designed for efficient voltage conversion in high-voltage power supplies using a simple external inductor and capacitor. Available in a 5-pin TO-220 through-hole package with worldwide shipping.

TSSOP, TSSOP16,.25

Use the download button to access the BQ500101DPCR schematic symbol, PCB footprint, and 3D model.