Integrated Circuit

DS26LS31MJ/883/NOPB is a quad differential RS-422 line driver from Texas Instruments in a ceramic DIP package, MIL-STD-883 qualified for high-reliability and military applications. It drives 4 balanced differential output pairs at TTL-compatible input levels across the full military temperature range, supporting long-distance data transmission over twisted-pair cables.

Use the download button to access the TUSB216RWBR schematic symbol, PCB footprint, and 3D model.

The TLV5621 is a low-power quad 8-bit digital-to-analog converter (DAC) with serial interface, operating from a single 5 V supply. It features four independent DAC channels with 8-bit resolution, binary-coded serial input, and a maximum analog output voltage of 2.9 V. Designed for portable instrumentation, signal generation, and battery-powered systems requiring compact multi-channel analog output control.

Use the download button to access the BQ29701DSER schematic symbol, PCB footprint, and 3D model.

Multiplexer Switch ICs 8.1 Gbps DisplayPort 1.4 1-to-2 / 2-to-1 differential mux supports DDC/AUX switching 50-NFBGA

Counter ICs Hi Sp CMOS Logic 14-Stage Binary

Gate Drivers Automotive 3-A, 120-V half bridge gate driver with 5-V UVLO and enable 8-SOIC -40 to 125

Operational Amplifiers - Op Amps AEC-Q100, 2-channel, 16-V, 4.5-MHz, RRIO, CMOS operational amplifier for cost-optimized systems 8-VSSOP -40 to 125

The SN74279N3 is a quad S-R latch integrated circuit from Texas Instruments in the TTL logic family, providing four independent set-reset latches in a 16-pin PDIP package. Two of the latches include dual S inputs for added flexibility, operating from a 4.75 V to 5.25 V supply over a 0 °C to 70 °C commercial temperature range. Designed for data storage, debouncing, and state-holding functions in digital logic systems.

Operational Amplifiers - Op Amps Automotive 2-channel, 40-V rail-to-rail input/output, low offset voltage, low noise op amp 8-VSSOP -40 to 125

Interface - Specialised AISG 3.0 on and off keying coax modem transceiver with wide temperature range

IC

TPS2065CDGNR-2 is a single-channel current-limited USB power distribution switch IC. It operates from 4.5 V to 5.5 V input with adjustable current limiting for USB port protection. Available in an 8-pin MSOP package for compact USB host and hub designs.

Power Management Specialised - PMIC 40-V, 35-m , 1-ch automotive smart high-side switch with adjustable current limit 16-HTSSOP -40 to 125

Analog to Digital Converters - ADC Automotive +/-1-V input, precision reinforced isolated modulator with integrated DC/DC converter

Motor/Motion/Ignition Controllers & Drivers 35-V, 1.5-A bipolar stepper or dual brushed motor driver with integrated current sensing 28-HTSSOP -40 to 125

PCI Interface IC PCIe® 4.0, 16 Gbps, 4-channel linear redrivers with integrated 2:1 mux 42-WQFN -40 to 85

Current Sense Amplifiers Dual-channel, 2.7-V to 120-V, 1.1-MHz, ultra-precise current sense amplifier 8-VSSOP -40 to 125

Gate Drivers 4-A, 12-V UVLO 5-KVrms opto compatible single channel gate driver with miller clamp and split output 8-SOIC -40 to 125

SN74HCS74QBQARQ1 is an automotive-grade dual D-type positive-edge-triggered flip-flop with Schmitt-trigger inputs, clear and preset functions, operating from 1.65 V to 5.5 V at up to 65 MHz in a 14-pin WQFN package, qualified for AEC-Q100 automotive applications.

MINI, SOP-8

Motor/Motion/Ignition Controllers & Drivers 35-V, 1.5-A bipolar stepper or dual brushed motor driver with integrated current sensing 24-VQFN -40 to 125

LDO Voltage Controllers MOSFET LDO Driver/Controller 8-VSSOP -40 to 125

LP2975AIMMX-5.0/NOPB is a low-dropout voltage regulator controller from Texas Instruments that drives an external PNP transistor to regulate output voltages from 1.24 V to 23 V. It features programmable current limiting and operates from a wide supply range in an 8-pin TSSOP package. Available from stock with worldwide shipping.

The UC2637J is a three-phase brushless DC motor controller from Texas Instruments in an 18-pin ceramic DIP package with maximum output current of 400mA. It requires an additional -2.5V to -20V negative supply and features glass-sealed ceramic construction for high reliability. Available from authorized distributors with worldwide shipping.

CC2652RSIPMOT is a SimpleLink multiprotocol 2.4 GHz wireless system-in-package integrating an ARM Cortex-M4F application processor and a dedicated Cortex-M0 RF core. It supports Bluetooth 5, IEEE 802.15.4 (Zigbee, Thread), and proprietary protocols in a single device. The SIP module is designed for smart home, building automation, and IoT sensor applications requiring multi-protocol flexibility.

Logic Gates Quadruple 2-Input Exclusive-OR Gate

Use the download button to access the LM5156DSSR schematic symbol, PCB footprint, and 3D model.

XOR Gate 4-Element 2-IN CMOS Automotive 14-Pin TSSOP T/R

Use the download button to access the M430F5438AQZCARET schematic symbol, PCB footprint, and 3D model.

Use the download button to access the LM51561DSSR schematic symbol, PCB footprint, and 3D model.

Switching Voltage Regulators 3.5-60V,1.5A Step Down SWIFT Converter

Use the download button to access the ISO6731FDWR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the ISO6731DWR schematic symbol, PCB footprint, and 3D model.

Digital Signal Processors & Controllers - DSP, DSC Low power C55x fixed point DSP- up to 100MHz, USB, LCD interface, FFT HWA, SAR ADC 144-NFBGA -10 to 70

Use the download button to access the SN74HCS596DR schematic symbol, PCB footprint, and 3D model.

Automotive-grade single-channel isolated gate driver delivering 10 A peak output current and 3.0 kV RMS isolation, designed for SiC MOSFET and IGBT switching in 16-SOIC package. Rated from -40°C to 150°C for AEC-Q100 automotive and industrial power conversion applications. Supports high-frequency switching with integrated protection features.

Switching Voltage Regulators 5.5-V input, 2-A step-down module with integrated inductor in 2 x 2.5 x 1.1-mm SIP package

16-bit Microcontrollers - MCU Extended temperature 25-MHz MCU with 256-KB flash, 16-KB SRAM, 12-bit ADC, DMA, UART/SPI/I2C, timer 113-NFBGA -55 to 125

TRSF3223EIDW is a multi-channel RS-232 line driver and receiver from Texas Instruments, operating from 3 V to 5.5 V supply, featuring Schmitt trigger inputs, dual driver outputs, and EIA-232-F/TIA-232-F compliance in a 20-pin SOIC package for portable and industrial serial interfaces.

BQ24105RHLRE3 is a synchronous switched-mode Li-Ion and Li-Polymer battery charge management IC with integrated power FETs, supporting charge currents up to 4 A from a 5 V input source, programmable charge voltage and current via external resistors, housed in a 20-pin QFN package for compact portable electronics designs.

5962-9233602VXA is the LP2953QML military-qualified adjustable micropower low-dropout voltage regulator from Texas Instruments, supporting 20 V to 30 V input range with 0.47 V typical dropout and fixed or adjustable output in a 16-pin GDSO package. Available in stock worldwide with fast shipping.

Use the download button to access the ISO6741FQDWRQ1 schematic symbol, PCB footprint, and 3D model.

LDO Voltage Regulators Automotive 500-mA, low-IQ, high-PSRR,&nbsp;low-dropout (LDO) voltage regulator with power good</p 8-SON -40 to 125

IC REG BUCK 3.3V 1.5A 16TSSOP

PCI Interface IC UPI 2.0, 16 Gbps, 8-channel linear redriver with four 2x2 crosspoint mux 64-WQFN -40 to 85

Buffers & Line Drivers Octal Buf/Line Drv w/3-State Outputs

DIP, DIP16,.3

Precision Amplifiers Dual, 5.5-MHz, high slew rate, low-noise, low-power, RRO precision JFET operational amplifier

Hot Swap Voltage Controllers 2.7-V to 5.7-V, 31-m?, 4-A eFuse with integrated reverse polarity protection