LP2975AIMMX-5.0/NOPB Texas Instruments Integrated Circuit (Small Outline Packages) In Stock

LP2975AIMMX-5.0/NOPB is a low-dropout voltage regulator controller from Texas Instruments that drives an external PNP transistor to regulate output voltages from 1.24 V to 23 V. It features programmable current limiting and operates from a wide supply range in an 8-pin TSSOP package. Available from stock with worldwide shipping.

OBSOLETEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
LP2975AIMMX-5.0/NOPBSmall Outline Packages
Quick Facts
Manufacturer
Texas Instruments
Package
Small Outline Packages
Pin Count
8
Lifecycle
OBSOLETE
Category
Integrated Circuit
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of LP2975AIMMX-5.0/NOPB?

  • LDO controller architecture supports output voltages from 1.24 V to 23 V using an external PNP pass transistor for flexible high-current designs
  • Programmable current limiting and soft-start control protect downstream loads during power-on and fault conditions
  • 8-pin TSSOP package with wide input supply range suitable for industrial and telecom voltage regulation applications

What is LP2975AIMMX-5.0/NOPB used for?

LP2975AIMMX-5.0/NOPB is suited for industrial power supplies and telecom equipment requiring regulated 5.0 V outputs with currents exceeding what integrated LDOs can provide, since the external PNP pass transistor scales output current as needed. It also fits board-level point-of-load regulators in test instruments, DSP boards, and networking hardware where adjustable 1.24 V to 23 V output voltage and current limit programming simplify multi-rail power design.

What are the specifications of LP2975AIMMX-5.0/NOPB?

Pbfree CodeNo
YTEOL0
Analog IC - Other TypeANALOG CIRCUIT
JESD-30 CodeR-PDSO-G8
JESD-609 Codee3
Number of Functions1
Output Voltage-Max23V
Output Voltage-Min1.24V
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSSOP8,.19
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Supply Voltage-Max (Vsup)24V
Supply Voltage-Nom (Vsup)15V
Surface MountYES
Temperature GradeAUTOMOTIVE
Terminal FinishMATTE TIN
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)30
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
HTS Code8542.39.00.01

Where can I find the LP2975AIMMX-5.0/NOPB datasheet?

LP2975AIMMX-5.0/NOPB Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for LP2975AIMMX-5.0/NOPB?

Compatible alternatives and drop-in replacements for LP2975AIMMX-5.0/NOPB:

LP2975AIMM-5.0National Semiconductor Corporation

Analog Circuit, 1 Func, PDSO8

View Part →
LP2975IMMX-5.0National Semiconductor Corporation

Analog Circuit, 1 Func, PDSO8

View Part →

Frequently Asked Questions

How does LP2975AIMMX-5.0/NOPB use an external transistor to scale output current beyond integrated LDOs?

LP2975AIMMX-5.0/NOPB drives the base of an external PNP pass transistor, so the output current is limited only by that transistor's ratings rather than the IC itself. A PNP device rated at 1 A or more allows the regulator to deliver ampere-level currents at 5.0 V, far exceeding the typical 150–300 mA of integrated LDO packages.

What output voltage range does LP2975AIMMX-5.0/NOPB support and how is it set?

The LP2975AIMMX-5.0/NOPB supports output voltages from 1.24 V to 23 V set by a resistor divider connected to the feedback pin. For the 5.0 V fixed variant, the internal divider is preset, but the controller can be reconfigured for other voltages in the 1.24 V to 23 V range by changing the external resistors.

In which applications does LP2975AIMMX-5.0/NOPB outperform a standard three-terminal LDO?

LP2975AIMMX-5.0/NOPB is preferred when load current exceeds 300 mA, output voltage must exceed 15 V, or programmable current limiting is required. Industrial motor-drive precharge circuits, telecom -48 V bus pre-regulators, and high-side DSP power rails benefit from its 23 V output headroom and adjustable current threshold.

What package does LP2975AIMMX-5.0/NOPB use and how does it simplify PCB layout?

LP2975AIMMX-5.0/NOPB is housed in an 8-pin TSSOP package with 0.65 mm pitch and a 3.0 mm x 4.4 mm body, requiring less than 15 mm² of board area for the controller itself. The external PNP transistor can be placed nearby with short base-drive traces, keeping the feedback loop short and layout-induced instability minimal.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India