Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
STM32H725IGT3 High-Performance MCU Design Guide
Design STM32H725IGT3 systems for reliable 550 MHz operation with practical power, clock, cache, DMA, PCB, ADC, and recovery guidance.
Jul 31, 2026
150141VS73100 Violet SMD LED Selection Guide: Color, Drive, and Sourcing
Select the 150141VS73100 by wavelength, brightness, drive current, 3528 fit, reliability, and traceable sourcing requirements.
Jul 31, 2026
STEF05SGR 5 V eFuse Protection Design Guide
Design a reliable 5 V STEF05SGR eFuse stage with current-limit math, capacitor sizing, thermal analysis, fault recovery, and PCB layout guidance.
Jul 30, 2026
S1J-E3/61T Rectifier Thermal Design, Surge, and Derating Guide
Practical S1J-E3/61T design guidance for thermal limits, inrush surge, PCB layout, voltage margin, and current derating.
Jul 30, 2026
All Integrated Circuit Components
Showing 45,701–45,750 of 77,666
The CD74HC86E-NG is a quad 2-input XOR gate integrated circuit from Texas Instruments. It operates at 2V to 6V supply voltage with high-speed CMOS logic, offering 26mA output drive. From $0.10 in stock worldwide shipping.
The CD74HC688NS is an 8-bit magnitude comparator IC with an active-low A=B output, implementing a full 8-bit equality comparison in a 20-pin Small Outline package. It operates in the HC high-speed CMOS logic family with wide supply voltage compatibility and low power consumption. Available from authorized distributors with worldwide shipping.
The CD74HCT14E-NG is a hex Schmitt-trigger inverter IC from Texas Instruments in DIP-14 package. Features six independent inverters with hysteresis for noise immunity, operating at 2V to 6V supply voltage. Available from stock with worldwide shipping.
Texas Instruments CD74HC73E-NG is a dual JK flip-flop with 2 independent negative-edge-triggered 1-bit elements in a 14-pin DIP package. It operates from 2 V to 6 V supply and offers CMOS-level high-speed switching. Available from stock with worldwide shipping.
The CD74HC4051E-NG is a High-Speed CMOS 8-Channel Analog Multiplexer/Demultiplexer from Texas Instruments, featuring low on-state resistance and wide analog signal range in a 16-pin DIP package suitable for signal routing and data acquisition systems. From $0.55 in stock with worldwide shipping.
CD74HC123NS
Shift Shift Register 1 Element 8 Bit 16-TSSOP
The CD74HC74E-NG is a dual D-type positive-edge-triggered flip-flop IC from Texas Instruments, featuring independent asynchronous preset and clear inputs for each of the two flip-flop channels. Operating over a 2V to 6V supply range with high-speed CMOS technology, it delivers reliable edge-triggered data storage for digital logic designs. Available in a 14-pin DIP package from authorized distributors worldwide with competitive pricing and in-stock availability.
CD54HC4002 HIGH SPEED CMOS LOGIC
The CD74HC4075E-NG is a triple 3-input OR gate IC from Texas Instruments using High-Speed CMOS technology, providing three independent logic OR functions in a single 14-pin DIP package. It operates over a wide supply voltage range of 2V to 6V with fast propagation delay and low power consumption. Suitable for combinational logic design in consumer, industrial, and computing applications, from competitive pricing in stock worldwide shipping.
Texas Instruments CD74HC27E-NG is a triple 3-input NOR gate logic IC from the HC (High-Speed CMOS) family operating at 2V to 6V supply voltage. Features three independent NOR gates with wide voltage range, low power consumption, and TTL-compatible inputs in a 14-pin DIP package. RoHS-compliant lead-free construction available in stock worldwide with fast shipping.
The CD74HC132E-NG is a quad 2-input NAND gate with Schmitt-trigger inputs from Texas Instruments operating from 2V to 6V supply. It integrates four independent NAND gates with hysteresis inputs for superior noise immunity in a 14-pin PDIP through-hole package. Available from authorized distributors with worldwide shipping.
The CD74HC125QPWRCT is a high-speed CMOS quad buffer with three-state outputs in an automotive-grade TSSOP package by Texas Instruments. Key specs: 2V to 6V supply range, four independent buffers with active-low output enable, AEC-Q100 qualified for automotive use. Available with worldwide shipping.
The ’HC374, ’HCT374, ’HC574, and ’HCT574 are octal D-type flip-flops with 3-state outputs and the capability to drive 15 LSTTL loads
Transceiver, Non-Inverting 1 Element 8 Bit per Element 3-State Output 24-SOIC
The CD74AC04E-NG is a hex inverter from Texas Instruments in the Advanced CMOS (AC) logic family. It operates across a wide supply voltage range of 1.5V to 5.5V with balanced noise immunity at 30% of supply voltage, housed in a 14-Pin PDIP through-hole package. Available from stock worldwide with fast shipping for general-purpose digital logic applications.
The CD74HC112NS is a dual J-K flip-flop from Texas Instruments in the HC/UH logic family, housed in a 16-pin SOP package. It operates at up to 4 MHz with a 15 pF load capacitance and 6 mA output current for low-power sequential logic designs. Available from stock worldwide with competitive pricing.
Octal Non-Inverting Bus Transceivers/Registers with 3 state output
Monostable Multivibrator 55 ns 16-CDIP
BiCMOS FCT Interface Logic Octal D-Type Flip-Flops with Reset
This device contains four independent 2-input AND gates. Each gate performs the Boolean function Y = A ● B in positive logic.
Quad 2-Input Inverting Multiplexers with 3-state output
High Speed CMOS Logic Inverting and Non-Inverting 3-to-8 Line Decoder Demultiplexer
CD74ACT153M96
The CD74AC74E-NG is a dual D-type positive-edge-triggered flip-flop IC with 2 elements in a 14-DIP (7.62mm) through-hole package. Operates in the advanced CMOS AC logic family with high-speed performance. Available from stock with worldwide shipping.
Magnitude Comparator Bit Active High Output A < B, A = B, A > B 16-CDIP
The CD74AC157E-NG is a quad 2-to-1 data multiplexer IC from Texas Instruments in the high-speed AC-series CMOS logic family, featuring four independent single-bit 2-input MUX channels in a 16-pin DIP package. It supports fast switching with low propagation delay and operates over standard logic supply voltages. In stock with worldwide shipping.
Encoders, Decoders, Multiplexers & Demultiplexers High Speed CMOS Logic 3-to-8 Line Decoder Demultiplexer Inverting and Non-Inverting 16-CDIP -55 to 125
The CD74AC163E-NG is a 4-bit synchronous binary counter from the AC-series high-speed CMOS logic family, featuring synchronous clear, parallel load, and carry-out for easy cascade expansion in a 16-pin DIP through-hole package. Available from stock with worldwide shipping.
The CD54HCT75F3A is a quad transparent D-type latch from Texas Instruments in the HCT logic family, operating up to 25MHz and packaged in a military-grade 16-pin ceramic DIP. It features TTL-compatible inputs, 50pF load capacitance, and is designed for reliable operation in high-reliability environments. Available in ceramic CDIP package with worldwide shipping from stock.
CD74AC158M
This device contains four independent 2-input XOR gates. Each gate performs the Boolean function Y = A ⊕ B in positive logic
JM38510/17003BCA is a integrated circuit for board-level control by Texas Instruments. Key specs: Ceramic DIP package, 14 pins, -55°C to 125°C. From inquiry pricing, in stock with worldwide shipping.
The CD54HCT4020F3A is a 14-stage binary counter in the High-Speed CMOS HCT logic family, housed in a 16-Pin CDIP ceramic package rated from -55°C to 125°C. Provides outputs from 12 stages with 50 pF load capacitance and TTL-compatible inputs. Available from stock with worldwide shipping.
Use the download button to access the CD54HCT4051F3A schematic symbol, PCB footprint, and 3D model.
CD54HCT4046AF3A is a Texas Instruments integrated circuit for electronic designs. Key specs include 16 pins, DIP, and datasheet-backed parameters. From inquiry quote with in stock worldwide shipping support.
High Speed CMOS Logic 8-Bit Parallel-In/Serial-Out Shift Register
High Speed CMOS Logic Triple 3-Input OR Gate
CD54HCT259F3A is an 8-bit addressable latch with 1-of-8 demultiplexer by Texas Instruments in a 16-pin ceramic DIP package. Key specs: HCT CMOS family, 4.5V-5.5V supply, 50pF load capacitance, TTL-compatible inputs. From $2.50, in stock with worldwide shipping.
Counter Shift Registers High Speed CMOS Logic Dual 4-Stage Binary Counter 14-CDIP -55 to 125
The CD54HCT32F is a high-speed CMOS logic quad 2-input OR gate IC in a ceramic DIP-14 package. It features 4 independent OR gate functions, 24 mA output current, and 50 pF load capacitance for reliable signal processing. Available from Texas Instruments with worldwide shipping.
High-Speed CMOS Logic 8-Input Multiplexer, Three-State
Counter IC Binary Counter 1 Element 4 Bit Positive, Negative 16-CDIP
The CD54HCT30F3A is a high-speed CMOS 8-input NAND gate IC in a 14-pin ceramic DIP package, part of the HCT logic family with TTL-compatible inputs and 50 pF load capacitance. Lead-free and available in stock with worldwide shipping.
CD54HCT257 HIGH SPEED CMOS LOGIC
Texas Instruments CD54HCT280 is a high-speed CMOS 9-bit odd/even parity generator and checker in the HCT logic family. Key specs: 4.5V to 5.5V supply, -55°C to 125°C range, 14-pin ceramic DIP package. Available from stock with worldwide shipping.
The ’HC192, ’HC193 and ’HCT193 are asynchronously presettable BCD Decade and Binary Up/Down synchronous counters, respectively
CD54HCT20 HIGH SPEED CMOS LOGIC
The CD54HCT191F3A is a synchronous 4-bit binary up/down counter with bidirectional counting and RCO (ripple carry output) in a 16-pin ceramic DIP package. It features load/preset input, HCT-family CMOS logic, and 50 pF load capacitance for versatile counting applications. Available from Texas Instruments with worldwide shipping.
Texas Instruments CD54HCT11F3A is a triple 3-input AND gate in the HCT CMOS logic family, housed in a 14-pin ceramic DIP package. Operates on 5 V supply, outputs sink up to 4 mA, and features 50 pF load capacitance compatibility. Suited for high-reliability logic designs.
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote