Integrated Circuit

SNJ54HC21J ACTIVE Military 2-ch, 4-input, 2-V to 6-V AND gates

Counter Shift Registers Synchronous 4-Bit Binary Counters 16-CDIP -55 to 125

Military 4-ch, 2-input, 4.5-V to 5.5-V bipolar NAND gates with open-collector outputs

Counter Shift Registers 8-Bit Parallel-Out Serial Shift Registers 14-CDIP -55 to 125

The SNJ54HC195J is a 4-bit serial/parallel-in to parallel-out shift register from Texas Instruments in the HC/UH logic family, operating at up to 21 MHz with a 50 pF load capacitance. It features J and K-bar serial inputs plus complementary shift-right serial outputs for flexible cascading in digital systems. Packaged in a mil-spec ceramic 16-pin CDIP for high-reliability and extended-temperature applications.

54HC175 QUADRUPLE D-TYPE FLIP-FL

54HC163 SYNCHRONOUS 4-BIT BINARY

HEX D-TYPE FLIP-FLOPS WITH CLEAR from Texas Instruments datasheet.

Dual 4-Line To 1-Line Data Selectors/Multiplexers

Encoders, Decoders, Multiplexers & Demultiplexers Dual 2-Line To 4-Line Decoders/Demultiplexers 16-CDIP -55 to 125

Encoders, Decoders, Multiplexers & Demultiplexers 8-Line To 3-Line Priority Encoders 16-CDIP -55 to 125

The SNJ54HC151J is an 8-to-1 data selector and multiplexer from Texas Instruments in the HC/UH high-speed CMOS family, operating over -55°C to 125°C. It selects one of eight data inputs based on three address select lines and supports 150pF load capacitance, housed in a 16-pin ceramic DIP for military-grade reliability. Available in stock with worldwide shipping.

Encoders, Decoders, Multiplexers & Demultiplexers 3-Line To 8-Line Decoders/Demultiplexers 16-CDIP -55 to 125

54F30 8-INPUT POSITIVE-NAND GATE

MSP430 CPUXV2 series Microcontroller IC 16-Bit 25MHz 128KB (128K x 8) FLASH 128-LQFP (20x14

Logic Gates Military 4-ch, 4-input, 2-V to 6-V NAND gates with Schmitt-Trigger inputs 14-CDIP -55 to 125

54HC11 TRIPLE 3-INPUT POSITIVE-A

54HC112 DUAL J-K NEGATIVE-EDGE-T

Inverter 6-Element CMOS 14-Pin CDIP Tube

Texas Instruments SN54HC03J is a military-grade quad 2-input NAND gate IC with open-drain outputs, operating from 2 V to 6 V supply voltage and rated for -55°C to 125°C temperature range. The device features four independent NAND gates in a 14-pin ceramic DIP package, delivering maximum output sink current of 5.2 mA and 50 pF load capacitance capability. Ideal for military and high-reliability applications requiring wide temperature operation, wired-AND logic configurations, and robust open-drain interfacing.

The SNJ54F20J is a dual 4-input NAND gate integrated circuit from Texas Instruments in a 14-pin ceramic DIP package. It features high-speed F/FAST logic with 50 pF load capacitance and 1 mA output low current, supporting industrial temperature ranges. Available worldwide with fast shipping from authorized distributors.

The SNJ54HC02J is a military-grade quadruple 2-input positive NOR gate from Texas Instruments in the HC CMOS logic family, offering four independent NOR gate functions in a single 14-pin ceramic DIP package. It operates over the full military temperature range of -55°C to 125°C with 50pF load capacitance support and 4mA output drive. Designed for defense, aerospace, and high-reliability systems requiring CMOS logic gates in hermetic packaging.

The SNJ54AHCT32J is a military-grade quad 2-input OR gate IC from Texas Instruments, featuring AHCT logic family with TTL-compatible CMOS inputs operating at 4.5 V to 5.5 V supply voltage. It delivers four independent OR gate functions with 8 mA output sink current and 50 pF load capacitance in a rugged ceramic DIP-14 package. Designed for harsh environments, this mil-spec device offers extended temperature range and long-term availability for defense and aerospace applications.

The SNJ54F27J is a military-grade triple 3-input NOR gate IC in a 14-pin ceramic DIP package, belonging to the high-speed FAST (F) bipolar logic family. Operating at 5V with 50pF load capacitance and three independent NOR gates, it delivers fast TTL-compatible logic for combinational circuits in avionics, radar, and defense electronic systems requiring high-reliability components.

The SN54F32J is a military-grade quad 2-input OR gate in a 14-pin ceramic DIP package, belonging to the FAST (F) bipolar logic family. It operates at 5V with four independent OR gates, 50pF load capacitance, and meets military temperature and reliability specifications, making it suited for high-speed combinational logic in defense electronics and avionics signal processing.

The SNJ54F138J is a high-speed 3-line to 8-line decoder and demultiplexer from Texas Instruments, featuring two active-LOW and one active-HIGH enable inputs for gating. It belongs to the F/FAST TTL logic family and is packaged in a 16-pin ceramic DIP for high-reliability military and aerospace applications rated -55°C to 125°C.

The SCANSTA101SMX/NOPB is a low-voltage IEEE 1149.1 JTAG system test access master from Texas Instruments, providing 32-bit external data bus control for boundary scan test management. It enables centralized JTAG chain orchestration and supports hierarchical IEEE 1149.1 test architectures across complex multi-board systems. Packaged in a 49-ball fine-pitch BGA for integration in high-density board test access controller applications.

The SN54F283J is a high-speed 4-bit binary full adder IC from Texas Instruments with internal carry-lookahead logic, belonging to the F/FAST TTL logic family. It supports ripple-carry cascading for multi-bit arithmetic operations and operates from a 5V supply. Packaged in a 16-pin ceramic DIP for high-reliability military and industrial applications.

The SN54F153J is a dual 1-of-4 data selector and multiplexer IC from Texas Instruments, featuring two independent 4-input multiplexers with common select lines, compatible with TTL-level F/FAST logic family. It operates with 50pF load capacitance and provides high-speed data selection for digital systems. Packaged in a 16-pin ceramic DIP for military and industrial temperature ranges.

The SNJ54F11J is a triple 3-input AND gate IC from Texas Instruments, housed in a 14-pin ceramic DIP package. It operates with fast logic (F/FAST family), featuring a max output sink current of 20 mA and 50 pF load capacitance. Available from stock with worldwide shipping.

The SNJ54F109J is a dual J-K positive-edge-triggered flip-flop with asynchronous clear and preset from Texas Instruments, based on the F/FAST bipolar logic family. It operates up to 70 MHz clock frequency with 1 mA output current and supports two independent state storage elements. Housed in a 16-pin ceramic DIP package, it is qualified for military applications from -55°C to 125°C.

The SNJ54F04J is a military-grade hex inverter IC from Texas Instruments, featuring six bipolar CMOS inverter channels from the F/FAST logic family. It operates from 4.5V to 5.5V supply, provides 20 mA output drive current, and supports 50 pF load capacitance. Housed in a 14-pin ceramic DIP package, it meets military specifications for the -55°C to 125°C operating temperature range.

The SNJ54BCT125AJ is a military-grade 4-channel bus buffer with 3-state outputs, operating from 4.5V to 5.5V supply, packaged in a 14-pin Ceramic Dual-In-Line (CDIP) form factor. Features BCT/FBT logic family with enable-low control, 64mA output sink current, and 50pF load capacitance support for reliable data bus driving. Rated for -55°C to +125°C temperature range, available from authorized distributors with worldwide shipping.

The SNJ54BCT126AJ is a military-grade 4-channel bus buffer from Texas Instruments' BCT/FBT logic family with TTL-compatible CMOS inputs and 3-state outputs. It features 48 mA output drive, active-high enable control per channel pair, and operates across the full -55°C to +125°C military temperature range. Housed in a 14-pin ceramic CDIP package for high-reliability defense systems.

The SNJ54F02J is a military-grade quad 2-input NOR gate IC from Texas Instruments in the FAST (F) bipolar logic family, offering very high-speed operation with four independent NOR gates in a 14-pin ceramic DIP package. It features 50 pF load capacitance rating and operates across the full military temperature range of -55°C to 125°C. Available for defense and aerospace procurement with worldwide distribution.

The SNJ54AS74AJ is a military-grade dual positive-edge-triggered D flip-flop with preset and clear from Texas Instruments, built with Advanced Schottky logic for 90 MHz operation in a 14-pin ceramic DIP. It delivers reliable single-bit data storage and toggling with preset and clear overrides, operating across the full military temperature range of -55°C to 125°C. Available for defense and aerospace procurement with worldwide distribution.

The SNJ54AS32J is a quad 2-input OR gate integrated circuit from Texas Instruments, built on Advanced Schottky (AS) logic technology. It features four independent OR gates in a 14-pin ceramic dual-in-line package, operating with a 50 pF load capacitance and a maximum output low current of 0.4 mA. Available from Texas Instruments with worldwide shipping.

The RM46L450CPGET is a 32-bit ARM Cortex-R4F microcontroller from Texas Instruments in a 144-pin LQFP package. It features a floating-point unit, 1 MB Flash, integrated ADC, DMA, and up to 80 MHz operation, designed for safety-critical automotive and industrial applications. Fully RoHS compliant with worldwide distribution.

The SNJ54AS30J is a military-grade single 8-input positive-NAND gate IC from Texas Instruments' Advanced Schottky (AS) logic family. It operates across the -55°C to +125°C military temperature range with typical propagation delays under 5 ns and 20 mA output drive current. Housed in a 14-pin ceramic DIP package for high-reliability defense applications.

The SNJ54AS175BJ is a military-grade quadruple D-type flip-flop with asynchronous clear from Texas Instruments, built with Advanced Schottky logic for 100 MHz operation in a 16-pin ceramic DIP package. It features a clear input, clock enable, and four independent D flip-flops operating from -55°C to 125°C, ideal for high-reliability data storage and register applications. Available for military and aerospace procurement worldwide.

The SNJ54AS20J is a military-grade dual 4-input positive-NAND gate IC from Texas Instruments' Advanced Schottky (AS) logic family. It features very fast propagation delays under 5 ns typical and operates across the -55°C to +125°C military temperature range. Packaged in a 14-pin ceramic DIP for high-reliability defense and space applications.

The SNJ54AS11J is a military-grade triple 3-input positive AND gate from Texas Instruments, built with Advanced Schottky (AS) logic technology for high-speed operation up to 50 pF load capacitance. It features three independent AND gates in a 14-pin ceramic DIP package rated for -55°C to 125°C operating temperature. Available for defense and aerospace procurement with worldwide distribution.

The SNJ54AS138J is a military-grade 3-line to 8-line decoder/demultiplexer from Texas Instruments in a 16-pin ceramic DIP package. It features two active-low and one active-high enable inputs for flexible chip selection, operating from 4.5 V to 5.5 V at 20 mA IOL across -55°C to 125°C. Designed for defense system address decoding.

The SN54AS10J is a triple 3-input NAND gate from Texas Instruments in the Advanced Schottky (AS) logic family, housed in a 14-pin ceramic DIP package. It provides three independent NAND gate functions with 50 pF load capacitance and 0.4 mA output sink current, designed for high-reliability military and industrial digital logic applications. Suitable for combinational logic, control signal inversion, and digital circuit design in harsh operating environments.

The SNJ54AS174J is a military-grade hex D-type flip-flop with asynchronous clear from Texas Instruments in the Advanced Schottky bipolar family. It features six positive-edge-triggered D flip-flops with a common clock and clear, supports up to 100 MHz clock frequency, and is housed in a 16-pin ceramic DIP for -55°C to 125°C operation.

The SNJ54AS161J is a 4-bit synchronous binary up-counter from Texas Instruments in the Advanced Schottky (AS) logic family, housed in a 16-pin ceramic DIP package. It features parallel load, synchronous reset, terminal count output (TCO), and 50 pF load capacitance, suitable for high-speed counting and frequency division. Designed for military, aerospace, and high-reliability digital systems requiring robust synchronous counting with look-ahead carry.

The SNJ54AS1004AJ is a military-grade hex inverter from Texas Instruments in a 14-pin ceramic DIP package. Using the Advanced Schottky (AS) bipolar process, it provides six independent inverting channels with 40 mA output current, operating from 4.5 V to 5.5 V across -55°C to 125°C. Built for high-reliability defense applications.

The PDRV10975ZGGPWP is a 12 V three-phase sensorless BLDC motor driver IC from Texas Instruments, based on the DRV10975 core. It features integrated FETs, back-EMF zero-crossing detection for sensorless commutation, and configurable motor speed control via PWM or analog input in a small WQFN package.

The SNJ54ALS74AJ is a military-grade dual D-type positive-edge-triggered flip-flop with preset and clear from Texas Instruments in a 14-pin ceramic DIP package. Operating at up to 25 MHz clock frequency, it is built on the ALS bipolar process for low power with -55°C to 125°C temperature rating. Suitable for military and aerospace sequential logic.

The SNJ54AS1000AJ is a military-grade quad 2-input NAND gate IC from Texas Instruments using advanced Schottky (AS) bipolar technology. It features four independent gates with high output drive of 40 mA at VOL and operates from 4.5 V to 5.5 V in a 14-pin ceramic DIP package over -55°C to 125°C.