Integrated Circuit

Counter Shift Registers Automotive 8-bit serial-in/parallel-out shift register 14-WQFN -40 to 125

NAND GATE 4-ELEMENT 2-IN BIPOLAR

IC GATE NOR 3CH 3-INP 14DIP

The SN74AHC132PW-P is a quad 2-input NAND gate with Schmitt-trigger inputs in the AHC (Advanced High-Speed CMOS) logic family, operating from 2 V to 5.5 V supply. It features hysteresis on all inputs for improved noise immunity and supports output drive up to ±8 mA, housed in a 14-pin TSSOP package. Designed for signal conditioning, oscillator circuits, and general-purpose logic in industrial and consumer electronics.

Encoders, Decoders, Multiplexers & Demultiplexers 3-to-8 line decoder demultiplexer with address latches 16-TSSOP -40 to 125

SOIC-14

SN74AS138NS

SN74HC74PWR-P is a dual positive-edge-triggered D-type flip-flop from Texas Instruments HC CMOS logic family, operating from 2 V to 6 V with set and reset inputs per latch. It provides 1-bit data storage per element at propagation delays below 20 ns in a 14-pin TSSOP package. Used in data registers, frequency dividers, and digital clock signal synchronization circuits.

Shift Shift Register 1 Element 8 Bit 16-SOIC

Latches 8-to-1 multiplexer with Schmitt-trigger inputs 16-SOIC -40 to 125

Use the download button to access the SN74HCS02QBQARQ1 schematic symbol, PCB footprint, and 3D model.

Texas Instruments SN74HC4020N-P2 is a 14-stage binary ripple counter in a DIP package operating from 2 V to 6 V. It delivers high-speed CMOS logic with 74HC-series compatibility and low power consumption. Available from stock with worldwide shipping.

Encoders, Decoders, Multiplexers & Demultiplexers Automotive dual 2-line to 4-line decoders/demultiplexers 16-SOIC -40 to 125

SOIC-16

Encoders, Decoders, Multiplexers & Demultiplexers Automotive 3-to-8 line decoder demultiplexer with address latches 16-SOIC -40 to 125

Decoder/Demultiplexer Single 4-to-10 16-Pin SOP Tube

NAND Gate 4-Element 2-IN CMOS 14-Pin WQFN EP T/R

SN74HC574APW is an octal edge-triggered D-type flip-flop from Texas Instruments with 3-state outputs, HC CMOS logic family operating from 2 V to 6 V supply, 20-pin TSSOP packaging, and rising-edge clock capture for 8-bit data latching and bus interfacing applications.

SN74HC590AN-NG is an 8-bit binary counter with 3-state output registers, operating from 2 V to 6 V supply and capable of 25 MHz counting frequency in a 16-pin DIP package. Features separate clock inputs for the counter and output register, allowing flexible count-then-latch operation. Suited for address generation, event counting, and frequency division in digital logic designs.

9-bit odd/even parity generators / checkers

SN74HC574N-P is an octal edge-triggered D-type flip-flop with 3-state outputs in the HC CMOS logic family, operating from 2 V to 6 V supply. It captures 8 bits of data on the rising edge of the clock and drives the outputs when output enable is asserted. Packaged in a 20-pin DIP, it is suited for data bus buffering, register files, and parallel port latching.

Buffer, Non-Inverting 1 Element 8 Bit per Element 3-State Output 20-SSOP

Flip-Flops Octal D-Ty Edge-Trig F-F W/3-State Otpt

SN74HC4040ANS is a 12-stage binary ripple counter in the 74HC CMOS logic family, operating from 2 V to 6 V supply. It provides 12 independent Q outputs, features asynchronous reset, and is housed in a small-outline package for digital frequency division and timing applications.

TSSOP-20

Texas Instruments SN74HC374ANS is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 20 pins, 374A in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Buffer, Non-Inverting 1 Element 6 Bit per Element 3-State Output 16-SO

The SN74F163ANS is a fast 4-bit synchronous binary counter IC with internal look-ahead carry circuitry, synchronous reset, and parallel load capability, housed in a 16-pin DIP package for high-speed digital counting and timing applications.

SN74F74NS is a dual D-type positive-edge-triggered flip-flop from Texas Instruments in the 74F fast TTL family, with preset and clear, operating at 5 V in a 14-pin SOIC package.

Texas Instruments SN74HC257AN is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 16 pins, 2 V, 6 V in Dual-In-Line Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

The SN74HC125N-NG is a quad non-inverting bus buffer with 3-state outputs, supporting 4 independent 1-bit buffer channels in a 14-pin DIP package. It operates across a 2 V to 6 V supply range with high-speed CMOS switching compatible with TTL input levels. Available from stock with worldwide shipping.

IC MULTIPLEXER 4 X 2:1 16TSSOP

SN74HC27NS

8-BIT PARALLEL-LOAD SHIFT REGISTERS

Texas Instruments SN74HC244ADBR is an 8-channel unidirectional bus buffer and line driver with 3-state outputs in a 20-SSOP package, operating from 2 V to 6 V across -40 to 85°C. It features active-low enable control and 150 pF load capacitance rating for robust bus driving. Available with worldwide shipping.

SN74HC163ANS

Inverter IC 6 Channel Schmitt Trigger 14-SSOP

SN74HC14APW-P is a hex Schmitt-trigger inverter from Texas Instruments, providing 6 independent inverting channels with hysteresis for improved noise immunity. It operates from a 2 V to 6 V supply and supports input hysteresis of approximately 0.9 V at 5 V, making it effective for signal conditioning on slow or noisy waveforms. Housed in a 14-pin TSSOP package, it is used in oscillator circuits, switch debouncing, and signal clean-up applications.

Texas Instruments SN74HC148NS is an 8-line to 3-line priority encoder in the HC CMOS logic family, operating from -40°C to 85°C over a 2 V to 6 V supply range. Available in a 16-pin SOIC package for compact digital priority encoding applications.

Decoder/Demultiplexer 1 x 3:8 16-TSSOP

The SN74HC139NS is a dual 2-to-4 line decoder and demultiplexer from Texas Instruments in a 16-pin SOP package, featuring active-low outputs, individual enable inputs per decoder section, and HC CMOS logic operating from 2 V to 6 V supply. It is used for address decoding, chip-select generation, and data routing in microprocessor, FPGA, and memory expansion circuits.

Logic Gates

SN74HC10N-P2 is a triple 3-input NAND gate IC in a 14-pin DIP package, operating from 2 V to 6 V supply. It features high-speed CMOS logic with 80 mA output drive capability and TTL-compatible inputs. Suitable for general-purpose logic applications in industrial and consumer electronics.

IC INVERTER OD 6CH 1-INP 14SOP

SOIC-16

Product Overview :Buffer/Line Driver 8-CH Non-Inverting 3-ST Bipolar 20-Pin SOP Tube

Inverter IC 6 Channel Open Drain 14-SO

4-ch, 2-input, 2-V to 6-V NAND gates

The SN74ALVC08PW-P is a quad 2-input AND gate IC from Texas Instruments featuring ALVC CMOS technology. It operates from 1.65V to 3.6V supply, delivers high-speed switching performance in a 14-pin TSSOP package. Ideal for low-voltage logic applications in portable and battery-powered systems.

The SN74HC04N-NG is a hex inverter logic IC from Texas Instruments in a 14-pin DIP package operating on 2 V to 6 V supply. It provides 6 independent NOT gates with high-speed CMOS logic levels and up to 25 mA output drive capability. Available from stock with worldwide shipping.