Integrated Circuit

The SN74LS123N-P2 is a dual retriggerable monostable multivibrator IC from Texas Instruments, featuring 28 ns propagation delay, dual independent one-shot channels, and a 16-pin DIP through-hole package. Available from authorized distributors with competitive pricing and worldwide shipping.

Synchronous 4-Bit Binary Counters

The SN74LS145NSR-P is a BCD-to-decimal decoder/driver IC by Texas Instruments in a 16-pin SOIC package, decoding a 4-bit BCD input to one of ten active-low outputs. Key specs: LS TTL family, open-collector outputs, 5V supply. Available in stock with worldwide shipping.

Synchronous FIFO 512 (256 x 1 x 2) Uni-Directional 60MHz 9ns 28-SOIC

The SN74LS08NS is a TTL Quad 2-Input AND Gate from Texas Instruments housed in a 14-pin SOIC package. It features four independent AND gates with Schottky-clamped inputs for improved switching speed. Available from stock with worldwide shipping.

Triple 3-Input Positive-NAND Gates 14-CDIP -55 to 125

IC GATE NOR 3CH 3-INP 14SOIC,NOR Gate IC 3 Channel - 14-SOIC

SN74LS07DB is a hex non-inverting buffer and driver IC from Texas Instruments featuring 6 open-collector outputs rated for high-voltage operation up to 30 V. It accepts standard TTL-level inputs and provides interfacing to higher-voltage loads such as relay coils, LED arrays, and bus pull-up networks in industrial and general-purpose logic designs.

Buffers & Line Drivers

The SN74ALS169BNS is a 4-bit synchronous up/down binary counter IC by Texas Instruments using Advanced Low-power Schottky TTL technology. Key specs: 4-bit binary counting, synchronous load and clear, small outline package with 5 V operation. Available from stock with worldwide shipping for digital timing and control applications.

pnp Inputs Reduce dc Loading

pnp Inputs Reduce dc Loading

Flip Flop 2 Element JK Type 1 Bit Positive Edge 16-DIP (0.300", 7.62mm)

Flip-Flops Dual Positive-Edge-Triggered D-Type- Flip-Flops With Clear And Preset 14-CDIP -55 to 125

Use the download button to access the SN74AS157NS schematic symbol, PCB footprint, and 3D model.

Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-SOIC (0.209", 5.30mm Width)

MSP430 CPUXV2 series Microcontroller IC 16-Bit 25MHz 512KB (512K x 8) FLASH 128-LQFP (20x14)

Counter Shift Registers Automotive 8-bit parallel-load shift registers

NAND Gate IC 1 Channel 14-SOIC

SN74BCT573DWR is an 8-bit D-type transparent latch with 3-state outputs by Texas Instruments, featuring BCT logic for high-speed bus interfacing. Key specs: 8-channel 1:1 latch, tri-state outputs, 20-SOIC package, 50 pF load capacitance. From competitive pricing, in stock with worldwide shipping.

SO-14

Encoders, Decoders, Multiplexers & Demultiplexers Dual 1-Of-4 Data Selectors/Multiplexers 16-CDIP -55 to 125

The SN74HCT244NS is a non-inverting octal buffer and line driver with 3-state outputs from Texas Instruments in the HCT CMOS logic family. It contains two independent 4-bit sections with output-enable control, TTL-compatible inputs, and operates from a 5V supply in a 20-pin PDIP package. Available from stock with worldwide shipping.

The SN74AS257NS is a quad 2-to-1 data selector/multiplexer with three-state outputs in the high-speed AS logic family operating at 5V. It features active-low output enable control and propagation delays under 5ns for fast data routing in digital systems. Available from Texas Instruments with worldwide shipping.

4.5-V to 5.5-V VCC Operation

Military 4-ch, 2-input, 4.5-V to 5.5-V bipolar NAND gates

SN74LS09NS

pnp Inputs Reduce dc Loadin

Element Bit per Element Output

6-ch, 4.75-V to 5.25-V bipolar inverters

IC DECODER/DEMUX 1X3:8 16TSSOP

Use the download button to access the SN74HCS595BQBR schematic symbol, PCB footprint, and 3D model.

Logic Gates Automotive Schmitt-trigger inputs quadruple 2-input AND gates with open-drain outputs 14-TSSOP -40 to 125

The SN74HC563NS is an octal D-type transparent latch with tri-state outputs from Texas Instruments in the HC CMOS logic family. It features 8-bit parallel latch capability with active-low output enable for bus interfacing applications. Available in a through-hole 20-PDIP package with worldwide shipping.

The SN74HC374ADB is an octal edge-triggered D-type flip-flop IC with 3-state outputs from Texas Instruments in the HC CMOS logic family. It stores 8 bits of data on the rising edge of the clock and features a common output-enable pin for bus driving applications. Available in a 20-pin SSOP package, it offers low power consumption and is suitable for high-density register and latch designs.

SN74HC11NS

Buffer/Line Driver 4-CH Non-Inverting 3-ST CMOS 14-Pin SOP Tube

12-CHBus Exchange Switch 1-Element 24-IN- 24-OUT 56-Pin TSSOP T/R

Use the download button to access the SN74F126NS schematic symbol, PCB footprint, and 3D model.

The SN74BCT25244DBR is an 8-channel, non-inverting buffer/line driver with 3-state outputs, operating from 4.5 V to 5.5 V supply, featuring BiCMOS technology for TTL-compatible inputs and high-drive CMOS outputs. From $0.80 in stock worldwide shipping.

Use the download button to access the SN74ALS623ANS schematic symbol, PCB footprint, and 3D model.

BUFF/DVR TRI-ST DUAL 20SO

• Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs

; Operating Supply Voltage: 5 V ; Operating Temperature Range: - 40 C to + 85 C ; Output Type: CMOS ; Product Type: Logic Gates. Missing: NG ‎| Must include: NG

The SN74HC00N-P2 is a quad 2-input NAND gate logic IC from Texas Instruments in the HC CMOS family. It operates from 2V to 6V, offers high-speed switching with low power consumption, and is housed in a standard 14-pin DIP package. Available from stock with competitive pricing and worldwide shipping.

Counter Shift Registers 8-bit parallel-out serial shift registers 14-SOIC -40 to 125

SN74HCS365 Hex Buffers and Line Drivers with 3 State Outputs and Schmitt Trigger Inputs

Buffers & Line Drivers Hex buffers and line drivers with non-inverting 3-state outputs 16-TSSOP -40 to 125

Counter Shift Registers Automotive 8-bit shift register with Schmitt-trigger inputs and 3-state output registers

Use the download button to access the SN74HCS237DR schematic symbol, PCB footprint, and 3D model.