Integrated Circuit

IC, Supervisor, c/w 5K pull up, active low, MCP130T-475I/SN

Microchip MCP1317T-46LE/OT is a single-channel voltage supervisor with a fixed 4.60 V threshold and active-high reset output. It includes a manual reset input and is housed in a 5-pin SOT-23 package for compact PCB integration. Available from stock with worldwide shipping.

dsPIC33FJ64GP202-I/SO is a 16-bit digital signal controller from Microchip combining MCU and DSP capabilities with 64 KB Flash, 8 KB RAM, DMA, and a barrel shifter in a 28-pin SOIC package. It runs at up to 40 MHz and is RoHS-compliant with an 11-week factory lead time.

The MCP130T-270I/TT is a single-channel voltage supervisor from Microchip with a 2.625V active-low reset threshold in a compact SOT-23-3 package. It provides reliable power-on reset and brownout detection with no external components required. Available in lead-free SOT-23 package with worldwide shipping.

The HCS512-I/SO is a KEELOQ code-hopping encoder IC from Microchip Technology designed for secure remote keyless entry and access control applications. It provides rolling-code encryption in a single-function 18-pin SOIC package. Available in stock worldwide at competitive prices with standard lead times.

The 24LC01BT-I/LT is a 1Kbit I2C serial EEPROM from Microchip with byte and page write capability, operating from 1.7V to 5.5V supply. It features 1 million erase/write cycles endurance and 200-year data retention, housed in a compact 5-pin SC-70 package.

Microchip MCP130-475I/SN is a voltage supervisor and reset IC with a 4.75 V threshold, active-low reset output, and integrated 5 kΩ pull-up resistor in an SOIC-8 package. It monitors supply rails and holds the MCU in reset during brownout conditions. Available from stock with worldwide shipping.

Microchip MCP1253-33X50I/MS is a regulated charge-pump DC/DC converter delivering 120 mA at 3.3 V output. It operates from 2.1 V to 5.5 V input using PWM control in MSOP-8 package. Available from stock with worldwide shipping.

The MCP1253T-33X50I/MS is a switched-capacitor PWM voltage regulator from Microchip delivering 120 mA regulated output. It operates from a 2.1V to 5.5V input range and comes in a compact MSOP-8 package. Available from stock worldwide for battery-powered and portable electronic designs.

The MCP1252-ADJI/MS is an adjustable-output 120 mA switched-capacitor charge pump DC-DC converter operating from a 2 V to 5.5 V input. It uses pulse-width modulation control and ships in an 8-pin MSOP package for compact board designs. Available from stock with worldwide shipping.

Microchip MCP111T-300E/TT is a fixed-threshold voltage detector with a 2.93 V trip point and active-low open-drain reset output in a 3-pin SOT-23 package. Monitors supply voltage for microcontroller reset generation in battery-powered and embedded systems. Available from stock worldwide with fast shipping.

The MCP121T-315E/TT is a single-channel voltage supervisor IC from Microchip with a fixed 3.15 V threshold, open-drain active-low reset output, and only 1 µA quiescent current. It monitors supply voltage and asserts a reset signal during brownout or power-up events. Available in the compact SOT-23-3 surface-mount package from authorized global distributors.

Microchip MCP120T-475I/TT is a single-channel voltage supervisor and reset IC with a fixed 4.75 V threshold in a compact SOT-23-3 package. It monitors the supply rail and asserts a reset signal whenever the voltage drops below the preset threshold to protect MCUs and logic from undervoltage conditions. Available from stock worldwide with fast shipping.

MCP101T-450I/TT is a single-channel voltage supervisor IC from Microchip Technology with a fixed 4.375 V threshold and active-high reset output in a 3-pin SOT-23 package. It monitors supply voltage and asserts a reset signal when the supply falls below the threshold. Available from stock worldwide with competitive pricing for microcontroller reset and power management designs.

16-bit dsPIC33 motor-control DSC with 64 KB Flash, 16 KB RAM, and a 40 MHz core, integrating hardware barrel shifter, ADC, and JTAG boundary scan in a 64-pin TQFP package. Purpose-built for FOC and BLDC motor drive applications with dedicated PWM and encoder peripherals. Available with worldwide shipping.

HCS515-I/SL is a KEELOQ code-hopping decoder IC from Microchip Technology in a 14-pin SOIC package for remote keyless entry systems. It supports secure rolling code authentication with a 64-bit encryption key for tamper-resistant access control. Available from stock worldwide with fast shipping.

The MCP100T-475I/TT is a single-channel microprocessor supervisor IC with a fixed 4.625 V reset threshold for monitoring 5 V power rails. It generates a reset pulse when supply voltage falls below the threshold, protecting microcontrollers from brownout and power-on glitches. Available in a tiny SOT-23-3 package for minimal PCB footprint in space-constrained designs.

The 24AA64-I/MS is a 64-Kbit I2C serial EEPROM from Microchip Technology featuring up to 400 kHz clock frequency, 1,000,000 write/erase cycle endurance, and 200-year data retention in an 8-pin MSOP package. It supports a standard I2C control byte (1010DDDR) for simple multi-device bus addressing. Available from authorized distributors with worldwide shipping.

MCP121T-270E/TT is a low-power voltage supervisor IC with 1 µA quiescent current and open-drain active-low reset output. Fixed 2.70 V threshold monitors supply rails in a 3-pin SOT-23 package. Available from Microchip with worldwide shipping.

Microchip DSPIC33FJ64MC510-I/PT is a 16-bit digital signal controller with 64 KB Flash and a 64 MHz fixed-point DSP core in a TQFP-100 package, featuring Boundary Scan for ease of test. Available from stock with worldwide shipping.

The HCS412-I/SN is a code-hopping encoder IC from Microchip Technology designed for secure keyless entry and remote control systems. It features KEELOQ rolling code technology, RoHS-compliant construction, and is housed in an 8-pin Small Outline (SOIC) package with a 260°C peak reflow temperature rating. Available from stock with worldwide shipping.

dsPIC33FJ64MC804-I/ML is a 16-bit DSC (digital signal controller) from Microchip with 64 KB flash and 16 KB RAM optimized for motor control applications. It runs at up to 40 MHz with DMA, floating-point DSP engine, and boundary scan in a 44-pin QFN package. Available from stock worldwide with fast shipping.

The MCP120T-475I/SN is a single-channel voltage supervisor IC with open-drain, active-low reset output in an SOIC-8 package. It monitors supply voltages with a fixed 4.75 V threshold, providing reliable system reset during power-up and brownout events. Available from Microchip with 6-week lead time, RoHS-compliant, and stocked globally.

dsPIC33FJ64GP710A-I/PT is a 100 pins integrated circuit by Microchip. Key specs: 100 pins, Quad Flat Packages package, MCU&DSP 64K Flash 16K RAM DMA TQFP100. From quote-based sourcing, in stock checks support worldwide shipping.

Voltage Detector 4.380V Active Low SOT23

MCP120T-450I/TT is a single-channel voltage supervisor IC that monitors supply rails and asserts an active-low reset output when the voltage drops below the 4.375 V threshold. Packaged in a tiny 3-pin SOT-23, it suits space-constrained microcontroller reset circuits. Available from stock with worldwide shipping.

Microchip MCP120-475I/SN is a single-channel voltage supervisor IC with open-drain, active-low reset output in SOIC-8 package. Monitors supply voltage with a fixed 4.75 V threshold and asserts reset during brownout conditions. Available from stock with worldwide shipping.

MCP120T-300I/TT is a single-channel voltage supervisor that asserts an active-low reset output when supply voltage falls below the fixed 2.925 V threshold, protecting 3.3 V microcontrollers from brownout lockup. Packaged in a 3-pin SOT-23 with industrial -40°C to +85°C rating, it requires no external passive components. Available from stock with worldwide shipping.

Microchip MCP100T-450I/TT is a single-channel voltage supervisor IC that monitors a 4.375V threshold and asserts an active-low reset in a tiny SOT-23-3 package. It offers a fixed threshold, 1-channel reset generation, and operates across industrial temperatures for reliable system startup protection.

Code hopping encoder,HCS200/SN SO8

ENC424J600-I/PT is a integrated circuit for board-level control by Microchip. Key specs: QFP package, 44 pins, -40°C to 85°C. From inquiry pricing, in stock with worldwide shipping.

The MCP101T-475I/TT is a microprocessor supervisor IC from Microchip with a fixed 4.625 V reset threshold, active-low open-drain output, and a tiny SOT-23-3 package. It monitors supply voltage in 5 V microcontroller and embedded systems to generate clean power-on and brownout resets.

ENC28J60-I/ML is a Microchip integrated circuit for electronic designs. Key specs include 28 pins, QFN, and datasheet-backed parameters. From inquiry quote with in stock worldwide shipping support.

HCS500/SM is a 8 pins integrated circuit by Microchip. Key specs: 8 pins, Small Outline Packages package, 0.207 INCH, PLASTIC, SOIC-8. From quote-based sourcing, in stock checks support worldwide shipping.

HCS410-I/SN is a KEELOQ code hopping encoder IC from Microchip Technology housed in an 8-pin SOIC package. It integrates a rolling code algorithm for secure keyless entry and remote access control applications. Available from stock worldwide with competitive pricing for automotive and security system designs.

dsPIC33FJ64MC506A-I/PT is a 64 pins integrated circuit by Microchip. Key specs: 64 pins, Quad Flat Packages package, MCU&DSP 64K Flash 8K RAM Motor TQFP64. From quote-based sourcing, in stock checks support worldwide shipping.

The HCS500-I/SM is a KEELOQ code hopping encoder IC from Microchip for secure keyless entry systems. It generates rolling codes with 64-bit encryption in a compact 8-pin SOIJ package. Available from stock with worldwide shipping.

HCS300-I/SN is a KEELOQ code-hopping encoder IC from Microchip for secure remote keyless entry systems, in an 8-pin SOIC package. Features rolling code authentication with a 64-bit encryption key for each transmission. Available from stock worldwide with competitive pricing.

The dsPIC33FJ64GP206A-I/PT is a 16-bit DSC/MCU from Microchip with 64KB Flash, 8KB RAM, DMA, and 40 MHz max clock. It combines DSP fixed-point math acceleration with a barrel shifter and multiple internal buses in a 64-pin TQFP package. Available from stock worldwide for embedded control and digital signal processing designs.

dsPIC33FJ64MC510A-I/PT is a 16-bit DSP-enhanced MCU with 64 kB Flash and 8 kB RAM optimized for motor control by Microchip in a 100-pin TQFP package. Key specs: 40 MHz maximum clock, integrated ADC and DMA channels, barrel shifter for DSP acceleration. From competitive pricing, in stock with worldwide shipping.

DSPIC33FJ32GP204-I/ML is a 16-bit dsPIC DSC from Microchip with 32 KB Flash, 2 KB RAM, and a 40 MHz maximum clock in a QFN-44 package. Barrel shifter, boundary scan, and multiple internal bus architecture enable efficient sensor and motor control applications. Available from stock with worldwide shipping.

The ENC424J600-I/ML is a standalone 10/100 Ethernet controller with SPI interface and 25-MHz maximum clock in a 44-pin QFN package. It supports asynchronous and bit-addressable communication protocols with up to 12.5-MBps data transfer rate. Available in stock worldwide with RoHS-compliant lead-free construction and 8-year YTEOL.

dsPIC33FJ64MC710A-I/PT is a microcontroller IC by Microchip. Key specs: QFP package, 100 pins, -40°C to 85°C. From inquiry pricing, in stock with worldwide shipping.

The ENC624J600-I/PT is a 10/100 Ethernet controller with an integrated MAC and PHY, supporting SPI and 8/16-bit parallel host interfaces at up to 25MHz clock. It delivers up to 12.5MBps data transfer rate and comes in a 64-pin TQFP package. Available from Microchip Technology with worldwide shipping.

dsPIC33FJ64MC802-I/MM is a 28 pins integrated circuit by Microchip. Key specs: 28 pins, Quad Flat No-Lead package, MCU&DSP 64K Flash 16K RAM DMA QFN28. From quote-based sourcing, in stock checks support worldwide shipping.

ENC28J60/SO is a 28 pins integrated circuit by Microchip. Key specs: 28 pins, Small Outline Packages package, SOIC-28. From quote-based sourcing, in stock checks support worldwide shipping.

Microchip dsPIC33FJ64MC802-I/SO is a 16-bit DSC microcontroller with 64 KB flash, 16 KB RAM, and DMA in a 28-pin SOIC package running up to 40 MHz. It integrates a DSP engine with barrel shifter for real-time motor control and signal processing. Available from stock with worldwide shipping.

24LC512-I/ST is a 512 Kbit (64K x 8) I2C serial EEPROM from Microchip operating from 2.5 V, offering up to 400 kHz clock and 1,000,000 write/erase cycle endurance. Features hardware address selection for up to 8 devices on a single 2-wire bus with 200-year data retention minimum. Packaged in compact TSSOP-8 for space-constrained embedded designs.

The dsPIC33FJ64MC508A-I/PT is a 16-bit digital signal controller from Microchip featuring 64KB Flash, 8KB RAM, DMA, ADC, and barrel shifter, running at up to 40MHz in an 80-Pin TQFP package. Available in stock with worldwide shipping.

dsPIC33FJ64GP310A-I/PT is a 100 pins integrated circuit by Microchip. Key specs: 100 pins, Quad Flat Packages package, MCU&DSP 64K Flash 16K RAM DMA TQFP100. From quote-based sourcing, in stock checks support worldwide shipping.