DSPIC33FJ64MC510-I/PT Microchip Integrated Circuit (Quad Flat Packages) In Stock
Microchip DSPIC33FJ64MC510-I/PT is a 16-bit digital signal controller with 64 KB Flash and a 64 MHz fixed-point DSP core in a TQFP-100 package, featuring Boundary Scan for ease of test. Available from stock with worldwide shipping.
- Manufacturer
- Microchip
- Package
- Quad Flat Packages
- Pin Count
- 100
- Lifecycle
- NOT RECOMMENDED
- Datasheet
- DSPIC33FJ64MC510-I/PT Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $8.4600(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 16-bit DSC core at up to 64 MHz with fixed-point DSP engine and barrel shifter enabling real-time motor-control algorithms
- 64 KB Flash program memory paired with dual-partition architecture in TQFP-100, supporting complex firmware with over 100 peripherals
- JTAG Boundary Scan support simplifies board-level testing and reduces debug time in high-pin-count production designs
Applications
The DSPIC33FJ64MC510-I/PT targets high-performance multi-axis motor control designs, including servo drives and BLDC inverters requiring FOC at 64 MHz. Its 100-pin TQFP package and rich peripheral set support advanced power-factor-correction converters and digital power supplies. Industrial automation equipment and HVAC compressor drives benefit from its real-time DSP throughput and Boundary Scan testability.
Specifications
| Pbfree Code | Yes |
| Manufacturer Package Code | TQFP-100 |
| Factory Lead Time | 6Weeks |
| YTEOL | 3 |
| Barrel Shifter | YES |
| Bit Size | 16 |
| Boundary Scan | YES |
| Clock Frequency-Max | 64MHz |
| Format | FIXED POINT |
| Internal Bus Architecture | MULTIPLE |
| JESD-30 Code | S-PQFP-G100 |
| JESD-609 Code | e3 |
| Low Power Mode | YES |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TQFP100,.55SQ,16 |
| Package Shape | SQUARE |
| Package Style | FLATPACK, THIN PROFILE |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| ROM Programmability | FLASH |
| Screening Level | TS 16949 |
| Supply Voltage-Max | 3.6V |
| Supply Voltage-Min | 3V |
| Supply Voltage-Nom | 3.3V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.4mm |
| Terminal Position | QUAD |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, CONTROLLER |
| Package | Quad Flat Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 3 |
| ECCN | 3A991.A.2 |
| HTS Code | 8542.31.00.01 |
| Country of Origin | Taiwan, Thailand |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What clock frequency does the DSPIC33FJ64MC510-I/PT support, and how does that translate to DSP throughput?
The DSPIC33FJ64MC510-I/PT runs at up to 64 MHz, delivering 32 MIPS of fixed-point DSP throughput. This allows a 20 kHz FOC motor control loop to execute with less than 50 µs latency, leaving headroom for communications and fault handling.
How much Flash and RAM does the DSPIC33FJ64MC510-I/PT include for a typical servo drive application?
It provides 64 KB of Flash program memory and 8 KB of data RAM. This is sufficient to implement a full-featured servo control stack with PID loops, look-up tables, fault logging, and a Modbus RTU communication layer in 16-bit word addressing mode.
In which package does the DSPIC33FJ64MC510-I/PT come, and why does the 100-pin count matter for motor-control systems?
The device is housed in a TQFP-100 package with a 0.5 mm pin pitch and 100 available I/O pins. This high pin count allows simultaneous connection of 3-phase PWM outputs, encoder quadrature inputs, ADC channels, and CAN/SPI peripherals without an external expander.
What is the typical factory lead time for the DSPIC33FJ64MC510-I/PT, and is Boundary Scan supported?
Factory lead time is approximately 6 weeks. The device supports JTAG Boundary Scan (IEEE 1149.1), which enables in-system board-level testing on automated ICT fixtures, reducing test time and improving production yield in high-volume manufacturing.
Related Guides
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
ADAQ7768-1 Design Guide for Precision Vibration and Dynamic Signal Measurement
Design ADAQ7768-1 precision data acquisition channels for vibration and dynamic sensing with the right bandwidth, reference, clock, and layout choices.
Jun 30, 2026
AD5204BRZ10 Design Guide for SPI-Controlled Gain and Offset Calibration
Design AD5204BRZ10 digital potentiometer calibration loops with bounded trim span, safe wiper current, clean SPI routing, and reliable startup codes.
Jun 30, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $15.2280 | $15.23 |
| 5+ | $9.9124 | $49.56 |
| 20+ | $9.2929 | $185.86 |
| 35+ | $9.0451 | $316.58 |
| 1000+ | $8.9000 | $8900.00 |
| 5000+ | $8.4600 | $42300.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”