Integrated Circuit

Adjustable and fixed low drop positive voltage regulator

LD1117DT18CTR, Low Dropout Voltage Regulator, 1.3A, 1.8 V ±1%, 3-Pin DPAK

TS3704IPT is a quad push-pull comparator IC from STMicroelectronics with 2 µs response time and 0.6 nA bias current. Supports 3 V to 15 V supply and 6.5 mV input offset voltage in a 14-pin TSSOP package. From $0.75, in stock, worldwide shipping.

TEXAS INSTRUMENTS - LMV431AIZ/NOPB - Voltage Reference, Precision, Shunt - Adjustable, LMV431A Series, 1.24V to 30V, TO-226AA-3

AMC23C14 is a dual-channel reinforced isolated comparator from Texas Instruments, offering galvanic isolation with up to 5 kVrms working voltage and a propagation delay under 100 ns per channel. It integrates two comparators with open-drain outputs in a small outline package, enabling high-speed fault detection across isolation barriers. Available from stock globally with competitive pricing.

XAM2634AOLFGMZCZQ is a multi-core Arm Cortex-R5F real-time MCU from Texas Instruments offering single, dual, or quad-core configurations with each core running up to 400 MHz. It integrates safety and security features for automotive and industrial functional-safety applications and is available in a BGA package. In stock worldwide for high-reliability embedded control designs.

The TMAG5231A1CQDBZR is a low-power omnipolar Hall-effect switch operating from 1.65 V to 5.5 V, with 0.6 mT hysteresis and a 2.7 mT maximum magnetic field range in a 3-pin SOT-23 package. It suits proximity and end-of-travel detection in space-constrained IoT and portable designs. Available from stock worldwide.

LVDS Interface IC High-Spd Diff Line Driver/Receiver UQFN - 0.6 mm max height

RF Microcontrollers - MCU SimpleLink Arm Cortex -M4F multiprotocol sub-1 GHz and 2.4-GHz wireless MCU integrated power amp

TPS75533KTTRG3 is a fixed 3.3V low-dropout linear regulator with 250mV typical dropout voltage and up to 5.5V input range, in a 5-pin SOT-23 SMD package. Delivers clean, stable rail for digital ICs. Available from stock worldwide.

SN74LXCH1T45DCKR is a single-bit dual-supply bidirectional bus transceiver with configurable voltage-level shifting, supporting 15 pF load and 32 mA output, in a 6-pin SC70 package. Available from stock with worldwide shipping.

Texas Instruments TPS62850220QDRLRQ1 is an automotive-grade 2 A current-mode PWM/PFM step-down converter with 2.7 V to 6 V input range and fixed 2.2 V output, in a compact SOT583 (8-pin) package. From $2.50 in stock worldwide shipping.

Motor / Motion / Ignition Controllers & Drivers Automotive 40-V, 32-A H-Bridge driver with integrated current sensing and feedback

Use the download button to access the LMR51420XFDDCR schematic symbol, PCB footprint, and 3D model.

LED Lighting Drivers Single channel programmable LED driver 6-DSBGA -30 to 85

Automotive qualified SimpleLink™ wireless MCU for use in wireless battery management systems

Board Mount Humidity Sensors Automotive 0.5% RH d igital humidity sens

TMCS1107A4UQDRQ1

IC REG LINEAR 10V 500MA TO252-3

Switching Voltage Regulators Hi Eff 3A SD VTG Reg

TPS75533KTTR is a fixed 3.3 V low-dropout linear voltage regulator from Texas Instruments with a 250 mV typical dropout voltage and up to 5.5 V input. Features 5-pin SOT-23 packaging for compact PCB designs. Available from stock with worldwide shipping.

Precision Amplifiers Rail-to-rail input and output, 24-V, zero-drift precision amplifier with 5-uV offset

Data Acquisition ADCs/DACs - Specialized Automotive, +/-250-mV input, precision reinforced isolated modulator with CMOS interface

Motor Drives Automotive 40-V max 8-A peak 3-phase motor driver with integrated current sensing 40-VQFN -40 to 125

Use the download button to access the F280039CPZRQ1 schematic symbol, PCB footprint, and 3D model.

The UC3842D8G4 is a current-mode PWM DC-DC controller IC from Texas Instruments supporting Boost, Buck, Flyback, and Forward topologies. It operates from an 11.5 V to 25 V input range and is housed in an 8-pin SOIC package with RoHS-compliant e4 rating. It delivers single-function isolated or non-isolated regulation for industrial power supply designs.

RT8059 is an adjustable-output 1 A synchronous buck DC-DC converter IC in a compact TSOT23-5 package. Key specs: 1 A output current, adjustable output voltage, high efficiency PWM control for low-power applications. From competitive pricing, in stock with worldwide shipping.

TEXAS INSTRUMENTS - DCP021212DP - Isolated Board Mount DC/DC Converter, Module, 10.8 V, 13.2 V, 2 Output, DIP, 14 Pins

Audio Amplifiers 50-W stereo, digital input, high-performance, closed-loop, Class-D, with integrated audio processor 32-HTSSOP -40 to 85

Texas Instruments TPS55289RYQR is a 30 V, 8 A four-switch buck-boost converter with I2C interface, supporting 3 V to 30 V input and programmable output voltage. Current-mode PWM and PFM control maximize efficiency across load ranges with worldwide shipping.

Analog to Digital Converters - ADC Automotive, two-channel, 24-bit, 64-kSPS, simultaneous-sampling, delta-sigma ADC

Motor Drives 40-V max 8-A peak 3-phase motor driver with integrated current sensing

Board Mount Humidity Sensors 0.5% RH digital humidity sensor, 0.19% long-term drift, 400 nA, 4-sec response time, NIST traceable

LP38503TSX-ADJ/NOPB is a 3 A adjustable ultra-low-dropout LDO voltage regulator by Texas Instruments, operating from 2.7 V to 5.5 V input with a typical dropout of only 420 mV at full load. Key specs: 3 A output current, 0.665 V maximum dropout voltage, -40°C to 125°C operating range. Pb-free 5-pin DDPAK/TO-263 package suits high-current board-mount power applications.

Board Mount Humidity Sensors Automotive 0.5% RH digital humidity sensor with removable tape cover

Power Management Modules High-density, 3-V to 36-V input, 1-V to 16-V output, 3-A power module 30-B0QFN -40 to 125

The THVD1406DR from Texas Instruments is a half-duplex RS-485/RS-422 line transceiver with automatic direction control, supporting 3.3 V to 5 V operation, 500 kbps data rates, and ±12 kV IEC ESD protection in an 8-pin small-outline package.

Use the download button to access the INA241A2IDDFR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the ISO6762DWR schematic symbol, PCB footprint, and 3D model.

Texas Instruments TPS92360DCKR is a 38 V, 1.2 A single-channel LED backlight driver in a tiny SC-70-5 package, operating from -40°C to 85°C with serial dimming control. Compact and efficient, it drives LED strings in displays and lighting modules with worldwide shipping.

Texas Instruments TPS7A2018PYCKR is a 300 mA ultra-low-noise, low-IQ LDO linear regulator with high PSRR in a 4-ball BGA package, operating from 2.1 V to 6 V input with a 200 mV maximum dropout. Ideal for noise-sensitive analog and RF supply rails.

Analog Front End - AFE Low-power 32-ch ultrasound AFE with 18.5mW/ch power, LVDS interface, and passive CW mixer 289-NFBGA 0 to 85

Use the download button to access the SN74HCS273PWR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the LP87524BRNFTQ1 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SN74CBTLV3257RSVR schematic symbol, PCB footprint, and 3D model.

CD4047BD is a 0A 1Output logic ic by Texas Instruments. Key specs: 0A, 1Output, 14 pins. From quote-based pricing, in stock with worldwide shipping for production sourcing.

Linear Voltage Regulator IC Positive Fixed 1 Output 250mA DDPAK/TO-263-5

CAN, RS232, RS485, SPI Digital Isolator 5000Vrms 6 Channel 50Mbps 50kV/µs CMTI 16-SOIC (0.295", 7.50mm Width)

Use the download button to access the DAC8801IDRBT schematic symbol, PCB footprint, and 3D model.

The TPS563300DRLR is a Texas Instruments current-mode PWM step-down switching regulator in an 8-pin VSON package, accepting 3.8 V to 28 V input with PFM light-load capability for high efficiency. Available in stock worldwide with competitive pricing.