TPS55289RYQR Texas Instruments Integrated Circuit (Other) In Stock
Texas Instruments TPS55289RYQR is a 30 V, 8 A four-switch buck-boost converter with I2C interface, supporting 3 V to 30 V input and programmable output voltage. Current-mode PWM and PFM control maximize efficiency across load ranges with worldwide shipping.
- Manufacturer
- Texas Instruments
- Package
- Other
- Pin Count
- 23
- Lifecycle
- ACTIVE
- Datasheet
- TPS55289RYQR Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $1.9184(MOQ 25)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TPS55289RYQR?
- 3 V to 30 V wide input range with 8 A output current supports diverse battery chemistries and industrial supply rails in a single design
- I2C programmable output voltage and control enable dynamic voltage scaling and remote power management without resistor changes
- Four-switch buck-boost topology maintains regulation when input voltage crosses output, ideal for hold-up capacitor and variable battery bus designs
What is TPS55289RYQR used for?
The TPS55289RYQR is ideal for battery-powered industrial equipment and portable instruments where the input voltage from a 2-cell to 8-cell lithium battery can swing above and below the required output rail. Its I2C interface allows a host MCU to dynamically adjust the output voltage, making it suitable for programmable bench supplies, adaptive radio-frequency power amplifier biasing, and FPGA core voltage sequencing. Automotive accessory and robotics designs that must regulate from a 12 V or 24 V bus during load-dump transients up to 30 V also benefit from this device.
What are the specifications of TPS55289RYQR?
| Pbfree Code | Yes |
| YTEOL | 15 |
| Additional Feature | ALSO HAS PFM CONTROL TECHNIQUE |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Input Voltage-Max | 30V |
| Input Voltage-Min | 3V |
| Input Voltage-Nom | 12V |
| JESD-30 Code | R-PQCC-N21 |
| JESD-609 Code | e3 |
| Number of Functions | 1 |
| Output Current-Max | 5A |
| Output Voltage-Max | 22V |
| Output Voltage-Min | 0.8V |
| Output Voltage-Nom | 20V |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | LCC21,.12X.2(UNSPEC) |
| Package Shape | RECTANGULAR |
| Package Style | CHIP CARRIER, VERY THIN PROFILE |
| Peak Reflow Temperature (Cel) | 260 |
| Surface Mount | YES |
| Switcher Configuration | BUCK-BOOST |
| Switching Frequency-Max | 2200kHz |
| Technology | BICMOS |
| Terminal Finish | Tin (Sn) |
| Terminal Form | NO LEAD |
| Terminal Position | QUAD |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 2 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.90 |
Where can I find the TPS55289RYQR datasheet?
TPS55289RYQR Datasheet DownloadOfficial datasheet from Texas Instruments
What are equivalent replacements for TPS55289RYQR?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What input voltage range does the TPS55289RYQR support and how does this help in battery-powered designs?
The TPS55289RYQR accepts input voltages from 3 V to 30 V, covering the full discharge curve of 1-cell to 7-cell lithium-ion packs and standard 12 V or 24 V industrial rails. Its four-switch buck-boost topology keeps the output regulated even as the battery voltage crosses the output setpoint, eliminating power interruptions in portable equipment.
How does the I2C interface on TPS55289RYQR simplify power rail tuning during product development?
The I2C interface lets a microcontroller or host processor adjust the output voltage in real time without swapping resistors, cutting iteration time from hours to seconds during development. In production, the same interface enables dynamic voltage scaling, allowing a processor to lower the supply to 0.9 V in sleep mode and ramp it back to 1.2 V at full load, saving significant system-level energy.
What is the maximum continuous output current of TPS55289RYQR and which load profiles does it suit?
The converter delivers up to 8 A continuous output current, making it suitable for powering FPGA core rails, high-power WiFi modules, and multi-core processors that draw 3 A to 6 A under full load. The PFM control mode improves light-load efficiency below 500 mA, broadening its fit to designs with highly variable load profiles such as IoT gateways and motor pre-drivers.
Why would a designer select TPS55289RYQR for an automotive accessory supply rather than a simple buck converter?
Automotive accessory supplies must withstand load-dump transients up to 40 V and cranking dips below 6 V, conditions where a buck converter loses regulation. TPS55289RYQR's 30 V maximum input and buck-boost topology keep the output stable from a 9 V crank event through a 28 V alternator spike, with an 8 A output sustaining loads such as instrument clusters, telematics units, or seat heater drivers without a secondary protection circuit.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
More from Texas Instruments
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 25+ | $4.7008 | $117.52 |
| 91+ | $2.2135 | $201.43 |
| 117+ | $2.1398 | $250.36 |
| 157+ | $1.9184 | $301.19 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit