Integrated Circuit

GREEN, PLASTIC, LCC-44

Atmel AT89C55WD-24PU, 8bit 8051 Microcontroller, 24MHz, 20 kB Flash, 40-Pin PDIP

VQFN-56

Use the download button to access the AT27C1024-45JU schematic symbol, PCB footprint, and 3D model.

Atmel AT89C51CC01UA-RLTUM, 8bit 8051 Microcontroller, 40MHz, 32 kB Flash, 44-Pin VQFP

Use the download button to access the AT89LP4052-20SU schematic symbol, PCB footprint, and 3D model.

AT42QT1244-AU, Touch Screen Controller

Microchip TC7660EPA is a switched-capacitor voltage converter that inverts a positive 1.5 V to 10 V input to a corresponding negative output voltage. Housed in an 8-pin DIP package, it requires only 2 external capacitors to produce a regulated negative supply rail for analog circuits.

Atmel AT32UC3L0128-AUT, 32bit AVR Microcontroller, 50MHz, 128 kB Flash, 48-Pin TQFP

Use the download button to access the AT25256B-SSHL-B schematic symbol, PCB footprint, and 3D model.

Microchip TC74A5-3.3VCTTR is a serial digital temperature sensor powered from a 3.3 V supply, providing 8-bit temperature data via I2C interface with address 0x4D in a compact 5-pin SOT-23 package. It measures temperatures from -40°C to +125°C, making it ideal for thermal management in embedded systems and consumer electronics.

Atmel AT25128B-SSHL-B EEPROM Memory, 128kbit, 80ns, 1.8 → 5.5 V 8-Pin SOIC

Atmel AT32UC3C264C-A2UT, 32bit AVR Microcontroller, 66MHz, 64 kB Flash, 64-Pin TQFP

LCC-32

MS-026, TQFP-64

Atmel AT25256B-XHL-B EEPROM Memory Chip, 256kbit, 4.5 → 5.5 V 8-Pin TSSOP

The USB2534I-1080AEN is a 4-port USB 2.0 hub controller IC from Microchip, operating from a 3 V to 3.6 V supply and housed in a compact 36-pin SQFN package. It supports I2C configuration, up to 24 MHz clock frequency, and is optimized for industrial-grade applications requiring reliable USB expansion. Suitable for embedded systems, industrial PCs, and USB peripheral aggregation designs.

Microchip TCM810JVNB713 is a voltage supervisor and reset IC with a 4.1 V maximum threshold in a compact 3-pin SOT-23B package. It monitors supply rails and asserts a reset signal when voltage drops below threshold, ensuring reliable microcontroller startup and brownout protection in space-constrained designs.

Atmel AT24C32D-XHM-B EEPROM Memory, 32kbit, 600ns, 1.7 → 5.5 V 8-Pin TSSOP

Atmel AT24C128C-XHM-B EEPROM Memory, 128kbit, 900ns, 1.7 → 5.5 V 8-Pin TSSOP

Microchip TCM810ZVLB713 is a single-channel voltage supervisor and microcontroller reset IC in a 3-pin SC-70 package. It monitors supply rails from 2.5 V to 5 V and asserts an active-low RESET signal during undervoltage conditions, ensuring reliable system startup and brownout recovery.

Microchip TCM809RVNB713 is a single-channel voltage supervisor with a fixed reset threshold between 2.55 V and 2.7 V and an active-low push-pull reset output. It operates with minimal supply current and is housed in a compact 3-pin SOT-23 package. Designed for microprocessor reset supervision in battery-powered and embedded systems.

Atmel AT24C128C-SSHM-B EEPROM Memory, 128kbit, 900ns, 1.7 → 5.5 V 8-Pin SOIC

Atmel AT24C256C-XHL-B EEPROM Memory, 256kbit, 600ns, 1.7 → 5.5 V 8-Pin TSSOP

Atmel AT24C04D-XHM-B EEPROM Memory Chip, 4kbit, 1.7 → 3.6 V 8-Pin TSSOP

PIC16F1782-I/SO is an 8-bit PIC microcontroller by Microchip running up to 32 MHz, with 2048 words Flash, 256 B EEPROM, integrated ADC and DAC, and operation down to 2.3 V. It comes in a 28-pin SOIC package enabling surface-mount assembly. Designed for industrial and consumer applications including motor control, sensor interfaces, and low-power embedded systems.

Atmel AT24C02D-STUM-T EEPROM Memory Chip, 2kbit, 1.7 → 3.6 V 5-Pin SOT

Microchip TCM828ECT713 is a switched capacitor charge pump voltage converter supporting input voltages from 1.5 V to 5.5 V and output current up to 25 mA at 12 kHz switching frequency. It delivers an inverted or doubled output in a compact 5-pin SOT-23 package suitable for space-constrained designs.

Microchip TCN75AVOA is a 2-wire I2C digital temperature sensor with ±2°C maximum accuracy and programmable alert output in an SOIC-8 package. It measures temperatures from -40°C to +125°C and communicates over I2C with configurable resolution. Suitable for thermal management, environmental monitoring, and system health protection in industrial and consumer electronics.

The Microchip USB5533B-5000JZX is a USB 3.0 SuperSpeed hub controller supporting data rates up to 5 Gbps per port, with simultaneous USB 2.0 backward compatibility and I2C/SPI configuration interfaces. Operating from 1.25 V and 3.3 V supplies, it is housed in a 64-pin QFN package for compact multi-port hub and docking station designs.

Microchip USB5532B-5000JZX is a USB 3.1 Gen 1 SuperSpeed hub controller supporting 2 downstream ports with up to 625 MBps data transfer. It operates from 3.3 V, integrates I2C, SMBus, and SPI configuration interfaces, and is housed in a 64-pin QFN package for compact USB hub designs.

UCS1002-1-BP-TR is a single-port USB power delivery controller from Microchip supporting USB 2.0 with a 2.9 V to 5.5 V supply range and programmable charging current in a compact 20-pin QFN package, designed for smart USB charging ports in consumer and industrial products.

The USB2513BI-AEZG is a 3-port USB 2.0 hub controller from Microchip, supporting High-Speed 480 Mbps operation with I2C and SMBus configuration. Housed in a 36-pin VQFN package, it serves industrial, embedded, and computing USB expansion designs.

Microchip USB3347-CP is a USB 2.0 ULPI transceiver supporting 1.8 V and 3.3 V I/O interfaces with a 26 MHz reference clock in a 24-pin QFN package. It bridges USB 2.0 High Speed, Full Speed, and Low Speed traffic to ULPI-compatible USB controllers. Suitable for portable devices, wireless modems, and embedded USB host and device designs.

The TC4428ACPA is a dual MOSFET gate driver from Microchip capable of sourcing and sinking 1.5 A peak current from a 4.5 V to 18 V supply. It features Schmitt trigger inputs and non-inverting plus inverting outputs in an 8-pin PDIP package for easy prototyping and through-hole designs.

The TC670ECHTR is a single-channel temperature-proportional fan controller IC from Microchip that adjusts fan speed based on measured temperature, eliminating discrete component fan control circuits, housed in a compact 6-pin SOT-23 package suitable for space-constrained server, networking, and embedded system thermal management designs.

Microchip TCM809LVLB713 is a single-channel voltage supervisor with a fixed threshold from 4.50 V to 4.75 V, designed to monitor 5 V supply rails and assert a reset signal when voltage drops out of range. It is housed in a tiny 3-pin SC-70 package for minimal board space in embedded systems.

Microchip TCM810MVLB713 is a single-channel voltage supervisor with a fixed reset threshold up to 4.5 V maximum, delivering an active-low push-pull reset output in a tiny 3-pin SC-70 package. It requires no external components and operates with very low quiescent current for battery-sensitive applications. Ideal for supervisory reset in microprocessor and FPGA power sequencing designs.

Microchip TC4431VPA is an inverting MOSFET gate driver delivering 1.5 A peak output current over a 4.5 V to 30 V supply range with Schmitt-trigger input for clean switching. It features rail-to-rail output swing and fast propagation delays in an 8-pin PDIP package, targeting power conversion, motor drive, and DC-DC converter gate-drive circuits.

The TC962EPA is a switched-capacitor voltage converter IC in an 8-pin DIP package, accepting an input voltage from 3 V to 18 V. It generates a regulated negative voltage output for powering op-amps and other dual-supply analog circuits. Ideal for portable instruments, battery-powered systems, and analog signal conditioning boards requiring a negative rail.

The PIC16F777-I/PT is a Microchip 8-bit PIC16F microcontroller running at up to 20 MHz with 14 KB flash memory and ADC capability. It features multiple analog and digital peripherals in a compact 44-pin TQFP package. Available from stock with worldwide shipping.

The TC7662BEPA is a switched-capacitor voltage converter IC from Microchip that generates a negative supply rail from a positive 1.5 V to 15 V input. It operates in an 8-pin DIP package, requires minimal external capacitors, and suits portable and battery-powered systems needing a dual-supply.

The TC962CPA is a switched-capacitor voltage converter IC that generates a regulated negative output voltage from a positive input supply ranging from 3 V to 18 V, housed in an 8-pin DIP package. It provides a simple charge-pump inversion solution requiring minimal external components for bipolar supply generation.

Microchip TC4420CPA is a 6A peak-current MOSFET driver IC in an 8-pin DIP package with Schmitt-trigger input. It provides high-speed single-channel gate driving with up to 30V supply range and is RoHS compliant for industrial and power electronics designs.

Microchip TC7662AEPA is a switched-capacitor voltage converter in an 8-pin PDIP package, accepting input voltages from 3 V to 18 V and generating a regulated inverted output. Designed for applications needing a negative supply rail from a single positive source without an inductor.

Microchip PIC24F16KA102-I/SP is a 16-bit PIC24 microcontroller with 16KB Flash, 2KB RAM, and a rich analog/digital peripheral set in a 28-pin SPDIP package. It operates from 1.8 V at 8 MHz up to 3.6 V at 32 MHz, making it an excellent choice for low-power sensor applications. Available from stock worldwide for battery-powered and industrial embedded designs.

The TC7662ACPA is a switched-capacitor voltage converter from Microchip Technology that generates a negative output voltage from a positive input supply in the 3 V to 18 V range. It operates without inductors using external capacitors only and is housed in an 8-pin DIP package, suitable for analog signal conditioning and op-amp bias supplies.

High Peak Output Current: 13A (typical) • Low Shoot-Through/Cross-Conduction Current in Output Stage • Wide Input Supply Voltage Operating Range: - 4.5V to 18V • High Continuous Output Current: 2.6A (maximum) • Matched Fast Rise and Fall Times: - 21 ns with 10,000 pF Load - 42 ns with 22,000 pF Load • Matched Short Propagation Delays: 44 ns (typical) • Low Supply Current: - With Logic ‘1’ Input – 140 µA (typical) - With Logic ‘0’ Input – 40 µA (typical) • Low Output Impedance: 0.9 (typical)

The TC7660HEPA is a switched-capacitor voltage inverter IC from Microchip supporting 1.5 V to 10 V input, converting a positive supply to an equal-magnitude negative rail. It is housed in an 8-pin DIP package, needs only 2 external capacitors, and targets portable analog and op-amp dual-supply applications.

TC4422EPA is a high-speed, single-channel MOSFET driver IC from Microchip with Schmitt trigger input, capable of driving large gate capacitances. It features 9A peak output current and operates from a 4.5 V to 18 V supply in an 8-pin DIP package.