Integrated Circuit

ARM®-based 32-bit MCU, 150DMIPs, up to 1MB Flash/128+4KB RAM, crypto, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces & camera

Operational Amplifiers - Op Amps RR Video Op Amp STBY 4.5V to 12V 100MHz

256-Kbit serial I²C bus EEPROM

Mainstream Mixed signals MCUs Arm Cortex-M4 core with DSP and FPU, 256 KBytes of Flash memory, 72 MHz CPU, MPU, 16-bit ADC comparators

50 Ω ultra thin balun with integrated harmonic filter / conjugate match balun to ST BLUENRG-134 and BlueNRG-234

Galvanically isolated 4 A single gate driver

Arm®-based 32-bit MCU, 150 DMIPs, up to 1 MB Flash/128+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces and camera

4 x 50W multifunction quad power amplifier with built-in diagnostics feature

Audio Amplifiers Low voltage operation, high efficiency (class SB), intelligent, dual BTL output power amplifier with full I2C diagnostics including tweeter detection and hardware stand-by/mute

Mainstream Mixed signals MCUs Arm Cortex-M4 core with DSP and FPU, 128 Kbytes of Flash memory, 72 MHz CPU, MPU, CCM, 12-bit ADC 5 MSPS, PGA, comparators

Low-power, dual-voltage comparator

ARM®-based 32-bit MCU, up to 32 KB Flash, crystal-less USB FS 2.0, CAN, 9 timers, ADC and comm. interfaces, 2.0 - 3.6 V

Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI

Ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, up to 192KB Flash, 20KB SRAM, 6KB EEPROM, USB, ADC, DACs

• Core: ARM® 32-bit Cortex®-M4 CPU (72 MHz max), single-cycle multiplication and HW division, DSP instruction with FPU (floatingpoint unit) and MPU (memory protection unit) • 1.25 DMIPS/MHz (Dhrystone 2.1) • Memories – 64 to 256 Kbytes of Flash memory – 32 Kbytes of SRAM with HW parity check • CRC calculation unit • Reset and power management – Voltage range: 2.0 to 3.6 V – Power-on/Power down reset (POR/PDR) – Programmable voltage detector (PVD) – Low power modes: Sleep, Stop, Standby – VBAT s

200 V, 10 A dual Ultrafast Diode

STM32 Dynamic Efficiency MCU with BAM, High-performance and DSP with FPU, Arm Cortex-M4 MCU with 128 Kbytes of Flash memory, 100 MHz CPU, Art Accelerator

Use the download button to access the STM32L4S9ZIT6 schematic symbol, PCB footprint, and 3D model.

Quad, ultralow voltage supervisor with push-button reset

Automotive 38 V, 500 mA synchronous step-down switching regulator with 30 µA quiescent current

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 1MB Flash, 128 KB SRAM, analog, audio

The A6986F from STMicroelectronics is a synchronous step-down switching regulator supporting 4 V to 38 V input, up to 2 A output current, and a low 30 µA quiescent current, packaged in a 16-pin small-outline package for automotive and industrial power designs.

STMICROELECTRONICS - TDA7376B - AMPLIFIER, CLASS AB, 80W, MULTIWATT-15

IC: operational amplifier; 1MHz; Ch: 4; SO14; 2.7÷16VDC; reel,tape

Automotive 8-bit MCU, with up to 128 Kbyte Flash, data EEPROM, 10-bit ADC, timers, LIN, CAN, USART, SPI, I2C, 3 to 5.5 V

Precision micropower shunt voltage reference

Arm® Cortex®-M7 32b MCU+FPU, 462DMIPS, 64KB Flash /256+16+4KB RAM, USB OTG HS/FS, 18 TIMs, 3 ADCs, 21 com IF

WINDOWED, FRIT SEALED, CERAMIC, DIP-28

ARM®Cortex®-M4 32b MCU+FPU, up to 256KB Flash+32KB SRAM, timers, 4 ADCs(16-bit Sig. Delta / 12-bit SAR), 3 DACs, 2 comp., 1.8 V

7 X 7 MM, 0.50 MM PITCH, ROHS COMPLIANT, UFBGA-100

High bandwidth (20 MHz for gain ≥ 4) micro-power (820 μA) rail-to-rail 5 V op amps

High precision rail-to-rail operational amplifier

ARM Microcontrollers - MCU High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 128 Kbytes of Flash memory, 1MB RAM, 400 MHz CPU, L1 cache, external memory interface, JPEG codec, HW crypto, large set of peripherals

Performance line, 24 MHz STM8S 8-bit MCU, up to 128 KB Flash, integrated EEPROM, 10-bit ADC, timers, 2 UARTs, SPI, I²C, CAN

Conv DC-DC 4V to 36V Step Down Single-Out 1.235V to 35V 2.5A Automotive 8-Pin HSOP EP Tube

UFBGA-100

STULPI01ATBR is a high-speed USB On-The-Go (OTG) ULPI transceiver from STMicroelectronics supporting 480 Mbps USB 2.0 data rates in a compact 36-ball BGA package, ideal for embedded USB host and peripheral interfaces.

DMOS dual full bridge driver with PWM current controller

Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3, 128KB Flash, 32KB SRAM, 4KB EEPROM, LCD, USB, ADC, DAC

Ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, up to 192KB Flash, 20KB SRAM, 6KB EEPROM, USB, ADC, DACs

Use the download button to access the VNQ810PTR-E schematic symbol, PCB footprint, and 3D model.

Rail-to-rail 1.1 V nanopower, push-pull dual comparators

32-bit Power Architecture® microcontroller for automotive ASILD applications

DFN-8

Motor / Motion / Ignition Controllers & Drivers Brushless/Sensorless 3-phase motor pre-driver for automotive applications

150 mA low quiescent current low noise voltage regulator

Precision JFET High Speed Dual Op Amp

Battery Sensor

Embedded Processor

Quad-Channel Isolators with Integrated DC-to-DC Converter