Integrated Circuit

e200z420 series Microcontroller IC 32-Bit Dual-Core 180MHz 4MB (4M x 8) FLASH 64-eTQFP (10x10)

Value line ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, 32-Kbyte Flash memory, 8-Kbyte SRAM, 256-byte EEPROM, ADC

The AS3911B-AQFM is a high-performance NFC/HF RFID reader IC from STMicroelectronics operating at 13.56 MHz. It supports ISO 14443 A/B and ISO 15693 protocols with an integrated transmitter, receiver, and SPI interface, housed in a compact 32-pin 5x5 mm QFN package.

USB charger detection interface

LQFP-144

Rail-to-rail, high output current, dual operational amplifier

LQFP-144

STMicroelectronics L5150CJ is an automotive-grade 5V fixed low dropout (LDO) voltage regulator supporting 6 V to 28 V input range with up to 40 V absolute maximum, 500 mV dropout voltage, and 0.04% line regulation for stable power delivery.

Dual and quad, rail-to-rail input/output, 60 µA, 880 kHz operational amplifiers

ACEPACK™ 2 converter inverter brake, 1200 V, 25 A, trench gate field‑stop M series IGBT with soft diode and NTC

Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3, 256KB Flash, 32KB SRAM, 8KB EEPROM, LCD, USB, ADC, DAC

Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3, 128KB Flash, 16KB SRAM, 4KB EEPROM, LCD, USB, ADC, DAC

Arm® Cortex®-M0+ 32-bit MCU, up to 128 KB Flash, 36 KB RAM, 4x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V

Arm® Cortex®-M0+ 32-bit MCU, up to 128 KB Flash, 36 KB RAM, 4x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V

TO-220FPAB, 3 PIN

Arm® Cortex®-M0+ 32-bit MCU, up to 128 KB Flash, 36 KB RAM, 4x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V

Quad, ultralow voltage supervisor with push-button reset

Arm® Cortex®-M0+ 32-bit MCU, up to 128 KB Flash, 36 KB RAM, 4x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V

STMicroelectronics ACS108-6SA-AP is a sensitive-gate logic-level triac rated at 600V and 450mA in a through-hole TO-92 package, enabling microcontroller-direct AC switching without additional driver stages. Available in stock worldwide with fast shipping.

32-bit Power Architecture® microcontroller for automotive ASILD applications

DFN-6

Enhanced dual channel power switches

ROHS COMPLIANT, SO-28

ARM® Cortex®-M4 32-bit MCU+FPU, up to 64 KB Flash, 16 KB SRAM, ADC, DAC, COMP, Op-Amp, 2.0 – 3.6 V

Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3, 128KB Flash, 32KB SRAM, 4KB EEPROM, LCD, USB, ADC, DAC

Dual LNBS supply and control IC with step-up and I²C interface

Single, dual, and quad rail-to-rail input/output 8 MHz operational amplifiers

Motor / Motion / Ignition Controllers & Drivers SLLIMM 2nd series IPM, 3-phase inverter, 35 A, 600 V short-circuit rugged IGBT

Use the download button to access the VN7050ASTR schematic symbol, PCB footprint, and 3D model.

LEAD FREE, MINI, SO-8

Automotive 8-bit MCU, with up to 8-Kbyte Flash memory, data EEPROM, 10-bit ADC, timers, LIN, SPI, I²C, 3 to 5.5 V

Amplifier IC 4-Channel (Quad) Class D 100-TQFP-EP (14x14)

Automotive 8-bit MCU, with up to 32 Kbyte Flash, data EEPROM, 10-bit ADC, timers, LIN, SPI, I2C, 3 to 5.5 V

Arm®-based 32-bit MCU, up to 128 KB Flash, 12 timers, ADC, DAC and communication interfaces, 2.0 - 3.6 V

High bandwidth (20 MHz for gain ≥ 4) micro-power (820 μA) rail-to-rail 5 V op amps

Low power (440uA), general purpose Bipolar 5V Op-Amps, GBP=5.5MHz, small offset, dual

4 Kbit, 2 Kbit and 1 Kbit serial SPI bus EEPROM with high-speed clock

Dual/triple ultra-low voltage supervisors with push-button reset (with delay option)

Mainstream Performance line, Arm Cortex-M3 MCU with 1 Mbyte of Flash memory, 72 MHz CPU, motor control, USB and CAN

Single channel high-side driver with analog current sense for automotive applications

ARM Microcontrollers - MCU STM32 Dynamic Efficiency MCU with BAM, High-performance and DSP with FPU, ARM Cortex-M4 MCU with 128 Kbytes Flash, 100 MHz CPU, Art Accelerator

Analog Switch ICs Bilateral Switch

Medium-density access line, ARM® -based 32-bit MCU with 64 or 128 KB Flash, 6 timers, ADC and 7 communication interfaces

STMicroelectronics TDA7494S is a single-channel Class AB audio power amplifier IC delivering up to 10 W output power with 26 dB gain and 22 kHz bandwidth. It features a 15-pin ZIP package and less than 10% harmonic distortion for consumer audio applications. Available from authorized distributors with worldwide shipping.

Advanced IGBT/MOSFET driver

Use the download button to access the STM32F303VEH7TR schematic symbol, PCB footprint, and 3D model.

Highly integrated tuner for AM/FM car radio

SOP-8

Mainstream Arm Cortex-M0 Low-voltage line 1,8V MCU with 256 Kbytes of Flash memory, 48 MHz CPU, CAN and CEC functions

SOT-23, 5 PIN