Integrated Circuit

Supervisor Push-Pull, Totem Pole 1 Channel, 4.39V, -40°C ~ 85°C SOT-23-5

32-bit Power Architecture microcontroller for automotive ASIL-B applications

ARM®-based Cortex®-M7 32b MCU+FPU, 462DMIPS, up to 1MB Flash/320+16+ 4KB RAM, USB OTG HS/FS, ethernet, 18 TIMs, 3 ADCs, 25 com itf, cam & LCD

Use the download button to access the STM32F733VEY6TR schematic symbol, PCB footprint, and 3D model.

Dual 32-bit Arm® Cortex®-M7 up to 480MHz and -M4 MCUs, up to 2MB flash, 1MB RAM, 46 com. and analog interfaces, SMPS, DSI

Arm®-Cortex®-M4 32b MCU+FPU, 125 DMIPS, up to 1.5MB flash, 320KB RAM, USB OTG FS, 1 ADC, 2 DACs, 2 DFSDMs

High-performance and DSP with FPU, Arm Cortex-M7 MCU with 512 Kbytes of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, SDRAM

Translation - Voltage Levels 4-Bit Dual Supply Lvl Trans w/out Pin

UFBGA-169

Flash in-system programmable (ISP) peripherals for 8-bit or 16-bit MCUs

5-pin supervisor with watchdog timer and push-button reset

High-performance and DSP with DP-FPU, Arm Cortex-M7 + Cortex-M4 MCU with 2MBytes of Flash memory, 1MB RAM, 480 MHz CPU, Art Accelerator, L1 cache, external memory interface, large set of peripherals including a Crypto accelerator, SMPS

ACEPACK 2 converter inverter brake, 650 V, 50 A trench gate field-stop IGBT M series, soft diode and NTC

4 x 50 W differential power amplifier with full I2C diagnostics, high efficiency and low voltage operation

Fully Integrated GPS/Galileo/Glonass/Beidou2/QZSS Receiver with embedded RF and in-package Flash

STMicroelectronics TS1872IDT is a low-power, rail-to-rail input/output operational amplifier operating from 1.8 V supply, with 80 dB typical CMRR, 6 mV max offset, and 150 nA max bias current. Available from stock with worldwide shipping.

VN7016AJEPTR is an automotive-grade high-side power switch IC from STMicroelectronics with MultiSense analog feedback. It provides intelligent load control with current sensing, fault detection, and protection features for 12V automotive loads. Available with worldwide shipping for body control and power distribution modules.

Buck, Boost Switching Regulator IC Positive or Negative Adjustable 1.25V 1 Output 1.5A (Switch) 8-DIP (0.300", 7.62mm)

Arm®-based 32-bit MCU, 150 DMIPs, up to 1 MB Flash/128+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces and camera

UFQFPN-28

5 V supervisor with battery switchover

Automotive GPS/Galileo/GLONASS/BeiDou/QZSS receiver

Ultra-low-power 32-bit MCU Arm®-based Cortex®-M3 with 512KB Flash, 80KB SRAM, 16KB EEPROM, LCD, USB, ADC, DAC

Automotive 8-bit MCU, with up to 32 Kbyte Flash, data EEPROM, 10-bit ADC, timers, LIN, SPI, I2C, 3 to 5.5 V

Automotive 3 A single channel LED driver with integrated DC-DC converter

Very low power application processor module for Bluetooth® LE v5.2

The STM32G031C8T6 is a 32-bit Arm Cortex-M0+ microcontroller from STMicroelectronics with up to 64 KB Flash, 8 KB RAM, a 48 MHz maximum clock frequency, integrated ADC and DMA, and a wide 1.7 V to 3.6 V supply range for low-power embedded designs.

SOT-23, 5 PIN

Dual/triple ultra-low voltage supervisors with push-button reset (with delay option)

Hot Swap Voltage Controllers POWER MANAGEMENT

The STPMIC1BPQR is an integrated power management unit (PMIC) from STMicroelectronics designed for application processors and SoC platforms. It integrates multiple DC-DC buck regulators, LDOs, and adjustable voltage thresholds in a compact WQFN-44 package. Available with a 12-week lead time and worldwide distribution.

The TS331IYLT is a single-channel low-power voltage comparator from STMicroelectronics featuring an open-drain output and rail-to-rail input capability in a SOT-23-5 package for industrial and consumer designs. It operates across a supply range of 2.7V to 16V with a maximum input offset voltage of 6mV and ultra-low bias current of 0.04µA, suited for battery-powered threshold detection circuits. Available from authorized distributors with in-stock inventory and worldwide shipping.

8-bit MCU, 3.8 to 5.5 V operating range with 8 to 32 Kbyte Flash/ROM, 10-bit ADC, 4 timers, SPI, SCI

STMicroelectronics TS1872AIDT is a low-power rail-to-rail input/output operational amplifier operating from a 1.8 V supply with 80 dB CMRR and 1500 µV max offset. Key specs: voltage-feedback architecture, 0.15 µA max bias current, SOIC package, frequency compensation. Available from stock worldwide.

Arm® Cortex®-M0+ 32-bit MCU, up to 64 KB Flash, 8 KB RAM, 2x USART, timers, ADC, comm. I/Fs, 2.0-3.6V

Automotive 8-bit MCU, with up to 8-Kbyte Flash memory, data EEPROM, 10-bit ADC, timers, LIN, SPI, I²C, 3 to 5.5 V

14 Output Rails PMIC 4 Adjustable Constant ON Time (COT) Buck SMPS converters BOOST with Bypass, LDO for Memory Power Supply

Low-voltage CMOS quad dual input NAND gate with 5 V tolerant inputs

The SPBT2632C2A-AT2 is a Bluetooth v3.0 Class 2 wireless module from STMicroelectronics with an integrated antenna supporting SPP and iAP profiles with AT2 command set. It enables quick Bluetooth serial communication integration for embedded designs. From $8.50, in stock worldwide shipping.

VND7E040AJ is a dual-channel high-side driver IC from STMicroelectronics with analog CurrentSense feedback, designed for automotive load switching applications up to 40 V. It integrates two independent MOSFET channels with protection features including overcurrent, overtemperature, and reverse battery in a compact SOP package. Available from stock worldwide with fast shipping.

STM817LM6F is a single-channel 5 V voltage supervisor with battery switchover from STMicroelectronics, featuring a fixed 4.65 V reset threshold. Monitors supply integrity and seamlessly switches to a backup battery when main power fails. Available from stock with worldwide shipping.

32-bit MCU family built on the Power Architecture® for automotive body electronics applications

Linear Voltage Regulator IC Positive Fixed 1 Output 1A 8-DFN (1.6x1.2)

MODULE-20

The LM158DT from STMicroelectronics is a dual voltage-feedback operational amplifier in an SOP-8 package, featuring low input bias current of 0.2 µA max, common-mode rejection ratio up to 85 dB, and internal frequency compensation for general-purpose analog signal conditioning.

Arm® Cortex®-M4 32-bit MCU+FPU, up to 512 KB Flash, 170 MHz / 213DMIPS, 128 KB SRAM, rich analog, math accelerator

Use the download button to access the STM32G441RBT6 schematic symbol, PCB footprint, and 3D model.

The TSV851AIYLT is a low-power single bipolar op-amp from STMicroelectronics, consuming only 180 µA supply current with a 1.3 MHz gain-bandwidth product and 5V operation. Available in SOT-23-5 package with worldwide shipping.

Arm® Cortex®-M0+ 32-bit MCU, up to 64 KB Flash, 8 KB RAM, 2x USART, timers, ADC, comm. I/Fs, 1.7-3.6V

STMicroelectronics VN808SR is an octal high-side driver integrating 8 independent source-current outputs rated at 0.5 A each in a 36-pin PowerSO package with built-in overcurrent, thermal, and transient protection. SPI-compatible serial interface controls all 8 channels from a microcontroller with minimal I/O pins. Available from stock worldwide for automotive and industrial load-switching applications.