VN808SR STMicroelectronics Integrated Circuit (Small Outline Packages) In Stock

STMicroelectronics VN808SR is an octal high-side driver integrating 8 independent source-current outputs rated at 0.5 A each in a 36-pin PowerSO package with built-in overcurrent, thermal, and transient protection. SPI-compatible serial interface controls all 8 channels from a microcontroller with minimal I/O pins. Available from stock worldwide for automotive and industrial load-switching applications.

OBSOLETEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
VN808SRSmall Outline Packages
Quick Facts
Manufacturer
STMicroelectronics
Package
Small Outline Packages
Pin Count
36
Lifecycle
OBSOLETE
Category
Integrated Circuit
Price
From $6.4564(MOQ 310)
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of VN808SR?

  • 8-channel high-side driver with 0.5 A per output, built-in overcurrent shutdown, thermal protection, and transient clamp for driving relays, lamps, and solenoids directly from a 12 V automotive bus
  • SPI serial interface controls all 8 channels and reads back diagnostic fault status, enabling full load management and fault detection with only 4 microcontroller I/O pins instead of 8 discrete GPIO outputs
  • 36-pin PowerSO package with integrated thermal resistance benefits, supporting continuous operation over −40°C to 150°C junction temperature range for under-hood automotive body-control module applications

What is VN808SR used for?

The VN808SR is designed for automotive body-control modules, industrial PLC output stages, and smart relay replacement circuits where 8 independent 12 V load channels—such as lamps, solenoids, relays, and heater elements—must be controlled and monitored from a single SPI-connected microcontroller. Its integrated protection features eliminate discrete fuse and clamping components, reducing BOM count and improving system reliability in harsh automotive environments subject to load-dump transients and temperature extremes.

What are the specifications of VN808SR?

Pbfree CodeYes
YTEOL0
Built-in ProtectionsTRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Driver Number of Bits8
Interface IC TypeBUFFER OR INVERTER BASED PERIPHERAL DRIVER
JESD-30 CodeR-PDSO-G36
JESD-609 Codee3
Number of Functions8
Output Current Flow DirectionSOURCE
Output Current-Max0.5A
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeSSOP36,.56
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH
Peak Reflow Temperature (Cel)245
Qualification StatusNot Qualified
Supply Voltage-Max45V
Supply Voltage-Min10.5V
Supply Voltage-Nom24V
Surface MountYES
Terminal FinishMATTE TIN
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)30
Turn-off Time150 µs
Turn-on Time100 µs
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 3
ECCNEAR99
HTS Code8542.39.00.60

Where can I find the VN808SR datasheet?

VN808SR Datasheet Download

Official datasheet from STMicroelectronics

What are equivalent replacements for VN808SR?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What is the per-channel output current rating of the VN808SR and which load types can it drive directly?

Each of the 8 channels in the VN808SR can source up to 0.5 A continuously, sufficient to drive automotive lamps up to 6 W at 12 V, small relays with 200 mA coil current, or solenoid valves rated below 0.5 A without external transistors. Overcurrent protection triggers at approximately 0.7 A per channel, disconnecting the output within 10 µs to prevent damage to the driver or wiring harness.

How does the SPI interface of the VN808SR reduce microcontroller I/O pin usage in an 8-channel system?

The VN808SR uses a 4-wire SPI bus (MOSI, MISO, SCLK, CS) to control all 8 output channels and read back diagnostic registers, replacing 8 individual GPIO output pins plus 8 feedback lines that a discrete MOSFET solution would require. Daisy-chaining multiple VN808SR devices on the same SPI bus scales the system to 16 or 24 channels using only 4 microcontroller pins plus one CS line per device.

Which protection features in the VN808SR eliminate external component requirements in automotive load-switching designs?

The VN808SR integrates 4 protection mechanisms: overcurrent shutdown (triggers above 0.7 A), thermal shutdown (activates near 150°C junction), under-voltage lockout (disables outputs below approximately 4 V supply), and transient clamp for ISO 7637 load-dump pulses up to 40 V. These built-in protections replace external fast-blow fuses, TVS diodes, and NTC thermistors that a discrete MOSFET driver circuit would require, reducing BOM by at least 8 passive components in an 8-channel design.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About STMicroelectronics

STMicroelectronics is a global semiconductor leader serving customers across the spectrum of electronics applications. ST's products are found in a wide range of applications including automotive, industrial, personal electronics, and communications.

AvailabilityIn Stock
Reference Price (USD)
From $6.4564
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
310+$6.4563$2001.47
pcs
Unit price: $6.4563 · Total: $2001.47

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India